|
|
798 AC Electric Drive Mining Truck
|
|
772 (07) Off-Highway Truck
|
Weights |
LRC Bare Chassis Weight without Hoist |
58414 lb |
- |
- |
- |
LRC Bare Chassis Weight with Hoist |
59223 lb |
- |
- |
- |
LRC Gross Vehicle Weight (Target) with Hoist |
180999 lb |
- |
- |
- |
LRC Gross Vehicle Weight (Target) without Hoist |
180999 lb |
- |
- |
- |
HRC Bare Chassis Weight without Hoist |
59567 lb |
- |
- |
- |
HRC Bare Chassis Weight with Hoist |
60376 lb |
- |
- |
- |
HRC Gross Vehicle Weight (Target) with Hoist |
180999 lb |
- |
- |
- |
HRC Gross Vehicle Weight (Target) without Hoist |
180999 lb |
- |
- |
- |
Note |
LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
- |
- |
- |
ROPS |
Tractor ROPS |
77430 lb |
- |
- |
- |
ROPS Standards |
- |
- |
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. |
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
FOPS Standards |
- |
- |
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
Operating Specifications |
Nominal Water Tank Capacity |
11000 gal (US) |
- |
- |
- |
Nominal Payload Class (100%) |
- |
- |
- |
51.6 ton (US) |
Top Speed - Loaded |
- |
- |
- |
49.2 mile/h |
Maximum Payload Class (110%) |
- |
- |
- |
56.7 ton (US) |
Body Capacity - SAE 2:1 |
- |
- |
- |
40.8 yd³ |
Target Payload Capacity |
- |
- |
- |
51.6 ton (US) |
Not to Exceed Payload (120%) |
- |
- |
- |
61.9 ton (US) |
Body Capacity (SAE 2:1)** |
- |
- |
- |
40.8 yd³ |
Engine |
Engine Model |
Cat® C18 |
Cat® C175-16 |
Cat® C175-16 |
Cat® C18 |
Rated Engine Speed |
1700 r/min |
- |
- |
1700 r/min |
Gross Power - SAE J1995 |
605 HP |
3500 HP |
2650 HP |
605 HP |
Rated Net Power - SAE J1349 |
550 HP |
- |
- |
- |
Number of Cylinders |
6 |
- |
- |
6 |
Bore |
5.7 in |
6.9 in |
6.9 in |
5.7 in |
Stroke |
7.2 in |
8.7 in |
8.7 in |
7.2 in |
Displacement |
1105 in³ |
5187 in³ |
5187 in³ |
1105 in³ |
Note |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
- |
- |
- |
Net Power - SAE J1349 |
- |
3405 HP |
2478 HP |
550 HP |
Optional Gross Power - SAE J1995 |
- |
3100 HP |
- |
- |
Rated Speed |
- |
1800 r/min |
1750 r/min |
- |
Emissions Rating |
- |
Fuel Optimized |
- |
- |
Note (1) |
- |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
- |
Note (2) |
- |
U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
EPA Tier 4 Final / EU Stage V available for applicable markets. |
- |
Note (3) |
- |
Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp |
- |
- |
Emissions |
- |
- |
Fuel Optimized |
- |
Net Power - ISO 9249 |
- |
- |
- |
550 HP |
Net Torque - SAE J1349 |
- |
- |
- |
2221 ft-lb |
Engine Power - ISO 14396 |
- |
- |
- |
598 HP |
Transmission |
Forward - 1 |
8 mile/h |
- |
8 mile/h |
8 mile/h |
Forward - 2 |
10.9 mile/h |
- |
10.8 mile/h |
10.9 mile/h |
Forward - 3 |
14.8 mile/h |
- |
14.8 mile/h |
14.8 mile/h |
Forward - 4 |
19.8 mile/h |
- |
19.9 mile/h |
19.8 mile/h |
Forward - 5 |
26.9 mile/h |
- |
27.1 mile/h |
26.9 mile/h |
Forward - 6 |
36.2 mile/h |
- |
37.3 mile/h |
36.2 mile/h |
Forward - 7 |
49.2 mile/h |
- |
- |
49.2 mile/h |
Reverse |
10.4 mile/h |
- |
7.3 mile/h |
10.4 mile/h |
Note |
Maximum travel speeds with standard 21.00R33 (E4) tires. |
- |
- |
- |
Top Speed - Loaded |
- |
- |
37.3 mile/h |
- |
Brakes |
Brake Surface - Front |
216 in² |
- |
13921 in² |
216 in² |
Brake Surface - Rear |
7794 in² |
- |
20847 in² |
7794 in² |
Standards |
- |
- |
J-ISO 3450 JAN88, ISO 3450:1996 |
- |
Brake Standards |
- |
- |
- |
ISO 3450:1996 |
Service Refill Capacities |
Fuel Tank Capacity |
140 gal (US) |
- |
- |
- |
Cooling System |
33 gal (US) |
211 gal (US) |
284 gal (US) |
33 gal (US) |
Crankcase |
17 gal (US) |
82 gal (US) |
82 gal (US) |
17 gal (US) |
Brake/Hoist Hydraulic Tank |
38 gal (US) |
- |
- |
38 gal (US) |
Brake Hoist System |
60 gal (US) |
- |
- |
60 gal (US) |
Differential - Final Drives |
47 gal (US) |
- |
- |
47 gal (US) |
Steering System - Including Tank |
60 gal (US) |
- |
77 gal (US) |
23 gal (US) |
Torque Converter - Transmission System |
17 gal (US) |
- |
- |
17 gal (US) |
Fuel Tank |
- |
1300 gal (US) |
750 gal (US) |
140 gal (US) |
Fuel Tank (Tier 4) |
- |
1200 gal (US) |
- |
- |
Diesel Exhaust Fluid Tank |
- |
100 gal (US) |
62 gal (US) |
- |
Final Drive - Each |
- |
67 gal (US) |
- |
- |
Hydraulic System - Including Tank |
- |
385 gal (US) |
- |
- |
Hydraulic Tank |
- |
296 gal (US) |
- |
- |
Grease Tank |
- |
90 lb |
- |
- |
Note (1) |
- |
DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option |
DEF Tank only available for EPA Tier 4 engine option. |
- |
Fuel Tank - Optional |
- |
- |
1300 gal (US) |
- |
Rear Axle - Housing |
- |
- |
260 gal (US) |
- |
Brake Hoist System - Includes Tank |
- |
- |
347 gal (US) |
- |
Torque Converter - Transmission Sump |
- |
- |
27 gal (US) |
- |
Torque Converter/Transmission System - Including Sump |
- |
- |
55 gal (US) |
- |
Steering Tank |
- |
- |
- |
14.5 gal (US) |
DEF Tank |
- |
- |
- |
6 gal (US) |
Steering |
Steering Standards |
ISO 5010:2007 |
Steering Standards: ISO 5010:2007 |
SAE J15111 OCT90, ISO 5010:1992 |
ISO 5010:2007 |
Steer Angle |
31 ° |
39 ° |
36 ° |
40.5 ° |
Turning Diameter |
57.7 ft |
- |
- |
- |
Turning Circle - Clearance Diameter |
66.6 ft |
- |
- |
66.6 ft |
Turning Diameter - Front |
- |
106.3 ft |
93.2 ft |
57.7 ft |
Note |
- |
Turning Diameter (ISO 7457:1997) |
- |
- |
Weights - Approximate |
Nominal Rated Payload |
- |
410 ton (US) |
256 ton (US) |
- |
Rated Gross Machine Weight |
- |
1375000 lb |
851000 lb |
- |
Chassis Weight |
- |
453826 lb |
265639 lb |
59223 lb |
Body Weight Range |
- |
38 833 - 43 275 kg (85,611 - 95,406 lb) |
- |
- |
Note (1) |
- |
Consult your tire manufacturer for maximum tire load. |
Consult your tire manufacturer for maximum tire load |
- |
Note (2) |
- |
Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. |
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
- |
Note (3) |
- |
Body weight varies depending on how body is equipped. |
Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
- |
Body Weight |
- |
- |
67682 lb |
17306 lb |
Target Gross Machine Operating Weight |
- |
- |
- |
181000 lb |
Target Gross Machine Weight |
- |
- |
- |
181000 lb |
Service Refill Capacities - High Altitude Only |
Fuel Tank |
- |
2000 gal (US) |
- |
- |
Cooling System |
- |
273 gal (US) |
- |
- |
Crankcase |
- |
124 gal (US) |
- |
- |
Hydraulic Tank |
- |
273 gal (US) |
- |
- |
Hydraulic System (includes tank) |
- |
342 gal (US) |
- |
- |
AC Drive System |
Total Reduction Ratio |
- |
35:01:00 |
- |
- |
Top Speed - Loaded |
- |
40 mile/h |
- |
- |
Generator/Alternator |
- |
Brushless, engine mounted, dual bearing |
- |
- |
Controls |
- |
IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
- |
- |
Wheel Motor |
- |
Cat high-torque AC induction, rear axle mounted |
- |
- |
Cooling System |
- |
Cat variable speed, hydraulically driven cooling system |
- |
- |
Braking System |
Service Brakes |
- |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
- |
Front Wet Disc Brake Surface Area |
- |
22642 in² |
13921 in³ |
- |
Rear - Wet Disc Brake Surface Area |
- |
32730 in² |
20847 in³ |
- |
Standards |
- |
Service and Secondary: ISO 3450:2011 |
(Service and Secondary): ISO 3450:1996 |
- |
Electric Retarding |
- |
Radial Grid Design |
- |
- |
Dynamic Retarding Power - Continuous |
- |
5480 HP |
- |
- |
Parking Brakes |
- |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
- |
Load Brake |
- |
Rear service brakes |
Rear service brakes |
- |
Note |
- |
Anti-Lock Brake System (ABS) optional with CMD package |
Anti-Lock Brake System (ABS) optional with CMD package |
- |
Weight Distributions - Approximate |
Front Axle - Empty |
- |
47 % |
48 % |
51.4 % |
Rear Axle - Empty |
- |
53 % |
52 % |
48.6 % |
Front Axle - Loaded |
- |
33 % |
33 % |
34.2 % |
Rear Axle - Loaded |
- |
67 % |
67 % |
65.8 % |
Note |
- |
Weight distributions optimized with Cat body. |
- |
- |
Capacity - HE Body - 100% fill factor |
Struck |
- |
129-200 m³ (168-261 yd³) |
- |
- |
Heaped (SAE 2:1) |
- |
218-276 m³ (285-361 yd³) |
- |
- |
Note |
- |
Contact your local Cat dealer for body recommendations. |
- |
- |
Body Hoists |
Type |
- |
Twin, two-stage hydraulic cylinders with snubbing valve. |
Twin, two-stage hydraulic cylinders with snubbing valve |
- |
Pump Flow - High Idle |
- |
257.3 gal/min |
224 gal/min |
112 gal/min |
Relief Valve Setting - Raise |
- |
3029 psi |
2955 psi |
2750 psi |
Body Raise Time - High Idle |
- |
21 s |
19 s |
8 s |
Body Lower Time - Float |
- |
22 s |
20 s |
10 s |
Body Power Down- High Idle |
- |
17.5 s |
- |
- |
Note (1) |
- |
Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. |
- |
- |
Note (2) |
- |
Power raise in both stages; power down capability in both stages. |
- |
- |
Note (3) |
- |
Automatic body-lower modulation reduces impact on frame. |
- |
- |
Body Power Down - High Idle |
- |
- |
17.5 s |
10 s |
Relief Valve Setting - Lower |
- |
- |
- |
500 psi |
Suspension |
Type |
- |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
- |
Effective Cylinder Stroke - Front |
- |
10 in |
5.1 in |
- |
Effective Cylinder Stroke - Rear |
- |
5 in |
4.2 in |
- |
Rear axle - Oscillation |
- |
- |
±4.9 degrees |
8.9 ° |
Empty Loaded Cylinder Stroke Front |
- |
- |
- |
9.2 in |
Empty Loaded Cylinder Stroke Rear |
- |
- |
- |
5.8 in |
Cab |
Air Conditioning |
- |
HFC - 134A refrigerant: 21,600 Btu/h |
Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr |
- |
Heater / Defroster |
- |
24600 Btu/h |
38900 Btu/h |
- |
Note |
- |
Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. |
Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
- |
ROPS Standards (1) |
- |
ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. |
- |
FOPS Standards |
- |
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. |
FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
- |
ROPS Standards (2) |
- |
- |
ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
- |
Engine - High Altitude Only |
Engine Model |
- |
Cat® C175-20 |
- |
- |
Gross Power SAE J1995:2014 |
- |
4150 HP |
- |
- |
Net Power - SAE J1349:2011 |
- |
4000 HP |
- |
- |
Rated Speed |
- |
1750 r/min |
- |
- |
Emissions Rating |
- |
Fuel Optimized |
- |
- |
Bore |
- |
6.9 in |
- |
- |
Stroke |
- |
8.7 in |
- |
- |
Displacement |
- |
6469 in³ |
- |
- |
Note 1 |
- |
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
- |
- |
Note 2 |
- |
Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp |
- |
- |
Tires |
Rims |
- |
44" x 63" Rims |
29" or 32" |
- |
Standard Tires |
- |
59/80 R63 |
40.00 R57 |
- |
Note (1) |
- |
Quick Change Rims optional. |
Extended life wheel stations optional. |
- |
Note (2) |
- |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
- |
Note |
- |
- |
Quick Change Rims optional. |
- |
Standard Tire |
- |
- |
- |
21.00R33 (E4) |
Dimensions (Approximate) |
Height - Top of ROPS |
- |
22.1 ft |
- |
- |
Overall Length |
- |
51.44 ft |
- |
- |
Wheel Base |
- |
21.9 ft |
- |
- |
Rear Axle - Tail |
- |
16.07 ft |
- |
- |
Dump Clearance - Empty |
- |
5.72 ft |
- |
- |
Loading Height - Empty |
- |
25.54 ft |
- |
- |
Overall Height - Body Raised |
- |
48.85 ft |
- |
- |
Centerline Front Tire Width |
- |
23.06 ft |
- |
- |
Front Axle Clearance - Loaded |
- |
2.81 ft |
- |
- |
Overall Canopy Width (with rock deflectors) |
- |
33.15 ft |
- |
- |
Outside Body/Canopy Width (without rock deflectors) |
- |
31.62 ft |
- |
- |
Inside Body Width |
- |
29.44 ft |
- |
- |
Front Canopy Height - Empty |
- |
26.01 ft |
- |
- |
Rear Axle Clearance - Loaded |
- |
2.8 ft |
- |
- |
Centerline of Rear Dual Tire Width |
- |
19.5 ft |
- |
- |
Overall Tire Width - Empty |
- |
30.27 ft |
- |
- |
Overall Length (High Altitude only) |
- |
51.87 ft |
- |
- |
Note |
- |
Dimensions listed includes canopy deflectors |
- |
- |
Sound |
Sound Standards |
- |
The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. |
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
- |
Sound Standards (1) |
- |
- |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
Sound Standards (3) |
- |
- |
- |
Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
Sound Standards (2) |
- |
- |
- |
Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). |
Capacity - HP Body - 100% Fill Factor |
Struck |
- |
- |
112.6-151 m³ (147-197.5 yd³) |
- |
Heaped (SAE 2:1)* |
- |
- |
162-191 m³ (212-250 yd³) |
- |
Note (1) |
- |
- |
Contact your local Cat dealer for body recommendation. |
- |
Note (2) |
- |
- |
*ISO 6483:1980 |
- |
Final Drives |
Differential Ratio |
- |
- |
1.8:1 |
2.74:1 |
Planetary Ratio |
- |
- |
16:01 |
4.80:1 |
Total Reduction Ratio |
- |
- |
26.8:1 |
13.14:1 |
Capacity - MSD II - 100% Fill Factor |
Struck |
- |
- |
112-142 m³ (146-186 yd³) |
- |
Heaped (SAE 2:1) |
- |
- |
159-190 m3 (209-250 yd3) |
- |
Note |
- |
- |
Contact your local Cat dealer for body recommendation. |
- |
Capacity - Dual Slope - 100% Fill Factor |
Heaped 2:1 (SAE) |
- |
- |
- |
40.8 yd³ |
Struck |
- |
- |
- |
31.3 yd³ |
Capacity - Flat Floor - 100% Fill Factor |
Struck |
- |
- |
- |
31.3 yd³ |
Heaped 2:1 (SAE) |
- |
- |
- |
40.9 yd³ |
Dimensions |
Height - Top of ROPS |
- |
- |
- |
12.8 ft |
Inside Body Depth - Maximum |
- |
- |
- |
5.7 ft |
Overall Body Length |
- |
- |
- |
26.8 ft |
Inside Body Length |
- |
- |
- |
19 ft |
Overall Length |
- |
- |
- |
28.9 ft |
Wheel Base |
- |
- |
- |
13 ft |
Rear Axle - Tail |
- |
- |
- |
9.5 ft |
Ground Clearance |
- |
- |
- |
1.6 ft |
Dump Clearance |
- |
- |
- |
1.5 ft |
Loading Height - Empty |
- |
- |
- |
11.6 ft |
Overall Height - Body Raised |
- |
- |
- |
27.1 ft |
Operating Width |
- |
- |
- |
15.7 ft |
Centerline Front Tire Width |
- |
- |
- |
10.4 ft |
Engine Guard Clearance |
- |
- |
- |
2 ft |
Outside Body Width |
- |
- |
- |
12.9 ft |
Inside Body Width |
- |
- |
- |
11.9 ft |
Front Canopy Height |
- |
- |
- |
13.7 ft |
Rear Axle - Clearance |
- |
- |
- |
1.9 ft |
Centerline of Rear Dual Tire Width |
- |
- |
- |
8.7 ft |
Overall Tire Width |
- |
- |
- |
12.9 ft |