Compare Equipment Go Back
 772G Off-Highway Truck |
 797F Mining Truck |
 775G Off-Highway Truck |
|
Weights |
|||
|---|---|---|---|
| LRC Bare Chassis Weight without Hoist | 58414 lb | - | 75118 lb |
| LRC Bare Chassis Weight with Hoist | 59223 lb | - | 76326 lb |
| LRC Gross Vehicle Weight (Target) with Hoist | 180999 lb | - | 246503 lb |
| LRC Gross Vehicle Weight (Target) without Hoist | 180999 lb | - | 246503 lb |
| HRC Bare Chassis Weight without Hoist | 59567 lb | - | 76573 lb |
| HRC Bare Chassis Weight with Hoist | 60376 lb | - | 77781 lb |
| HRC Gross Vehicle Weight (Target) with Hoist | 180999 lb | - | 246503 lb |
| HRC Gross Vehicle Weight (Target) without Hoist | 180999 lb | - | 246503 lb |
| Note | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
ROPS |
|||
| Tractor ROPS | 77430 lb | - | 85288 lb |
Operating Specifications |
|||
| Nominal Water Tank Capacity | 11000 gal (US) | - | 15000 gal (US) |
Engine |
|||
| Engine Model | Cat® C18 | Cat® C175-20 | Cat® C27 |
| Rated Engine Speed | 1700 r/min | - | - |
| Gross Power - SAE J1995 | 605 HP | 4000 HP | 825 HP |
| Rated Net Power - SAE J1349 | 550 HP | - | 683 HP |
| Number of Cylinders | 6 | - | - |
| Bore | 5.7 in | 6.9 in | 5.4 in |
| Stroke | 7.2 in | 8.7 in | 6 in |
| Displacement | 1105 in³ | 6469 in³ | 1648 in³ |
| Note | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. |
| Net Power - SAE J1349 | - | 3795 HP | - |
| Rated Speed | - | 1750 r/min | - |
| Emissions | - | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | - |
| Note (1) | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - |
| Note (2) | - | U.S. EPA Tier 4 Final available for applicable markets. | - |
| Note (3) | - | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | - |
Transmission |
|||
| Forward - 1 | 8 mile/h | 6.6 mile/h | 6.6 mile/h |
| Forward - 2 | 10.9 mile/h | 8.9 mile/h | 9.3 mile/h |
| Forward - 3 | 14.8 mile/h | 12 mile/h | 12.6 mile/h |
| Forward - 4 | 19.8 mile/h | 16.2 mile/h | 16.8 mile/h |
| Forward - 5 | 26.9 mile/h | 21.8 mile/h | 22.8 mile/h |
| Forward - 6 | 36.2 mile/h | 29.4 mile/h | 30.7 mile/h |
| Forward - 7 | 49.2 mile/h | 39.5 mile/h | 41.6 mile/h |
| Reverse | 10.4 mile/h | 7.4 mile/h | 8.7 mile/h |
| Note | Maximum travel speeds with standard 21.00R33 (E4) tires. | - | Maximum travel speeds with standard 24.00R35 (E4) tires |
| Top Speed - Loaded | - | 39.5 mile/h | - |
Brakes |
|||
| Brake Surface - Front | 216 in² | - | 257 in² |
| Brake Surface - Rear | 7794 in² | - | 9497 in² |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 140 gal (US) | - | 210 gal (US) |
| Cooling System | 33 gal (US) | 306 gal (US) | 45 gal (US) |
| Crankcase | 17 gal (US) | 103 gal (US) | 24 gal (US) |
| Brake/Hoist Hydraulic Tank | 38 gal (US) | - | 46.5 gal (US) |
| Brake Hoist System | 60 gal (US) | - | 85 gal (US) |
| Differential - Final Drives | 47 gal (US) | - | 38 gal (US) |
| Steering System - Including Tank | 60 gal (US) | 95 gal (US) | 14 gal (US) |
| Torque Converter - Transmission System | 17 gal (US) | - | - |
| Fuel Tank | - | 1000 gal (US) | - |
| Fuel Tank (Tier 4) | - | 1200 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 100 gal (US) | - |
| Front Wheels - Each | - | 16 gal (US) | - |
| Differentials | - | 330 gal (US) | - |
| Steering Tank | - | 67 gal (US) | - |
| Brake/Hoist Tank | - | 203 gal (US) | - |
| Brake Hoist System - Includes Tank | - | 489 gal (US) | - |
| Torque Converter Sump | - | 80 gal (US) | - |
| Torque Converter/Transmission System - Including Sump | - | 166 gal (US) | - |
| Note (1) | - | DEF Tank only available for EPA Tier 4 engine option. | - |
Steering |
|||
| Steering Standards | ISO 5010:2007 | ISO 5010:2007 | ISO 5010:2007 |
| Steer Angle | 31 ° | - | 31 ° |
| Turning Diameter | 57.7 ft | - | 77.1 ft |
| Turning Circle - Clearance Diameter | 66.6 ft | - | 85.6 ft |
| Steering Angle | - | 40 ° | - |
| Turning Diameter - Front | - | 122.7 ft | - |
| Note | - | Turning Diameter (ISO 7457:2009) | - |
Weights - Approximate |
|||
| Nominal Rated Payload | - | 400 ton (US) | - |
| Rated Gross Machine Weight | - | 1375000 lb | - |
| Chassis Weight | - | 474472 lb | - |
| Body Weight | - | 94799 lb | - |
| Note (1) | - | Consult your tire manufacturer for maximum tire load | - |
| Note (2) | - | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - |
| Note (4) | - | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - |
Body Hoists |
|||
| Type | - | Twin, two-stage hydraulic cylinders with snubbing valve. | - |
| Pump Flow - High Idle | - | 317 gal/min | - |
| Relief Valve Setting - Raise | - | 3510 psi | - |
| Body Raise Time - High Idle | - | 25 s | - |
| Body Lower Time - Float | - | 18 s | - |
| Body Power Down- High Idle | - | 18 s | - |
Suspension |
|||
| Type | - | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | - |
| Effective Cylinder Stroke - Front | - | 3.9 in | - |
| Effective Cylinder Stroke - Rear | - | 3.7 in | - |
| Rear axle - Oscillation | - | ±3.96 degrees | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | - | 47.20% | - |
| Rear Axle - Empty | - | 52.80% | - |
| Front Axle - Loaded | - | 33.30% | - |
| Rear Axle - Loaded | - | 66.70% | - |
| Note | - | Weight distributions optimized with Cat body. | - |
Final Drives |
|||
| Type | - | Double reduction, planetary with full floating axles. | - |
| Differential Ratio | - | 1.276:1 | - |
| Planetary Ratio | - | 16.67:1 | - |
| Total Reduction Ratio | - | 21.26:1 | - |
| Note | - | Double reduction, planetary with full floating axles. | - |
Tires |
|||
| Tires | - | 59/80 R63 | - |
| Rims | - | 44" x 63" | - |
| Note | - | Quick Change Rims optional. | - |
| Note (1) | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - |
Braking System |
|||
| Service Brakes | - | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - |
| Front Wet Disc Brake Surface Area | - | 20500 in² | - |
| Rear - Wet Disc Brake Surface Area | - | 30750 in² | - |
| Standards | - | Service and Secondary: ISO 3450:2011 | - |
| Parking Brake | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - |
| Load Brake | - | Rear service brakes | - |
| Note | - | Anti-Lock Brake System (ABS) optional with CMD package | - |
Capacity - HP Body - 100% Fill Factor |
|||
| Struck | - | 225 yd³ / 172 m³ | - |
| Heaped (SAE 2:1)* | - | 330 yd³ / 252 m³ | - |
| Note (1) | - | Consult your local Cat dealer for body recommendations. | - |
Cab |
|||
| Air Conditioning | - | HFC - 134A refrigerant: 24,300 Btu/h | - |
| Heater / Defroster | - | 38900 Btu/h | - |
| Note | - | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | - |
| ROPS Standards (1) | - | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | - |
| ROPS Standards (2) | - | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - |
| FOPS Standards | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | - |
Dimensions |
|||
| Rear Axle - Clearance - Loaded | - | 3.08 ft | - |
| Inside Body Depth - Maximum | - | 11 ft | - |
| Overall Height - Body Raised | - | 51.5 ft | - |
| Loaded Ground Clearance | - | 2.58 ft | - |
| Loading Height - Empty | - | 23 ft | - |
| Engine Guard Clearance - Loaded | - | 3.33 ft | - |
| Height - Top of ROPS - Empty | - | 21.4 ft | - |
| Front Canopy Height - Empty | - | 25.33 ft | - |
| Overall Body Length | - | 48.6 ft | - |
| Inside Body Length | - | 32.75 ft | - |
| Overall Length | - | 49.5 ft | - |
| Wheel Base | - | 23.58 ft | - |
| Rear Axle - Tail | - | 12.9 ft | - |
| Dump Clearance | - | 6.58 ft | - |
| Centerline Front Tire Width | - | 21.41 ft | - |
| Overall Canopy Width | - | 29.91 ft | - |
| Outside Body Width | - | 32 ft | - |
| Inside Body Width | - | 27.91 ft | - |
| Centerline of Rear Dual Tire Width | - | 20.41 ft | - |
| Overall Tire Width | - | 31.25 ft | - |
Add a Similar Product:
