CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    798 AC Electric Drive Mining Truck
    View Product
    797F Mining Truck
    View Product Remove
    785 Mining Truck (LRC, Tier 4 Final / EU Stage V)
    View Product Remove

    Weights - Approximate
    Nominal Rated Payload 410 ton (US) 400 ton (US) -
    Rated Gross Machine Weight 1375000 lb 1375000 lb -
    Chassis Weight 453826 lb 474472 lb -
    Body Weight Range 38 833 - 43 275 kg (85,611 - 95,406 lb) - -
    Note (1) Consult your tire manufacturer for maximum tire load. Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load
    Note (2) Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
    Note (3) Body weight varies depending on how body is equipped. - Body weight varies depending on body selection and configuration.
    Body Weight - 94799 lb 57779 lb
    Note (4) - Tier 4 Chassis Weight: 486263 lb (220565 kg) -
    Nominal Rated Payload (33.00R51 Tires) - - 153 ton (US)
    Rated Gross Machine Weight (33.00R51 tires) - - 550000 lb
    Nominal Rated Payload (36.00R51 Tires) - - 157 ton (US)
    Rated Gross Machine Weight (36.00R51 tires) - - 564000 lb
    Chassis Weight (33.00R51 Tires) - - 186799 lb
    Chassis Weight (36.00R51 Tires) - - 193192 lb

    Engine
    Gross Power - SAE J1995 3500 HP 4000 HP 1600 HP
    Engine Model Cat® C175-16 Cat® C175-20 Cat� 3512E
    Net Power - SAE J1349 3405 HP 3795 HP 1509 HP
    Optional Gross Power - SAE J1995 3100 HP - -
    Rated Speed 1800 r/min 1750 r/min -
    Emissions Rating Fuel Optimized - Fuel Optimized
    Bore 6.9 in 6.9 in 6.7 in
    Stroke 8.7 in 8.7 in 8.5 in
    Displacement 5187 in³ 6469 in³ 3573 in³
    Note (1) Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
    Note (2) U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
    Note (3) Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. Additional fuel optimized selectable power ratings: 1,450 hp
    Emissions - U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. -

    Service Refill Capacities - High Altitude Only
    Fuel Tank 2000 gal (US) - -
    Cooling System 273 gal (US) - -
    Crankcase 124 gal (US) - -
    Hydraulic Tank 273 gal (US) - -
    Hydraulic System (includes tank) 342 gal (US) - -

    Service Refill Capacities
    Fuel Tank 1300 gal (US) 1000 gal (US) 410 gal (US)
    Fuel Tank (Tier 4) 1200 gal (US) 1200 gal (US) -
    Diesel Exhaust Fluid Tank 100 gal (US) 100 gal (US) 36 gal (US)
    Cooling System 211 gal (US) 306 gal (US) 100 gal (US)
    Crankcase 82 gal (US) 103 gal (US) 54 gal (US)
    Final Drive - Each 67 gal (US) - -
    Hydraulic System - Including Tank 385 gal (US) - -
    Hydraulic Tank 296 gal (US) - -
    Grease Tank 90 lb - -
    Note (1) DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option DEF Tank only available for EPA Tier 4 engine option. -
    Front Wheels - Each - 16 gal (US) 8 gal (US)
    Differentials - 330 gal (US) -
    Steering Tank - 67 gal (US) 29 gal (US)
    Steering System - Including Tank - 95 gal (US) -
    Brake/Hoist Tank - 203 gal (US) 135 gal (US)
    Brake Hoist System - Includes Tank - 489 gal (US) 160 gal (US)
    Torque Converter Sump - 80 gal (US) -
    Torque Converter/Transmission System - Including Sump - 166 gal (US) -
    Differential - Final Drives - - 139 gal (US)
    Steering System - Includes Tank - - 45 gal (US)
    Torque Converter - Transmission System - Including Sump - - 46 gal (US)

    Steering
    Steer Angle 39 ° - 36 °
    Turning Diameter - Front 106.3 ft 122.7 ft -
    Steering Standards Steering Standards: ISO 5010:2007 ISO 5010:2007 ISO 5010:2007
    Note Turning Diameter (ISO 7457:1997) Turning Diameter (ISO 7457:2009) -
    Steering Angle - 40 ° -
    Turning Diameter - ISO 7457:1997 (33.00R51 tires) - - 97.75 ft

    AC Drive System
    Total Reduction Ratio 35:01:00 - -
    Top Speed - Loaded 40 mile/h - -
    Generator/Alternator Brushless, engine mounted, dual bearing - -
    Controls IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - -
    Wheel Motor Cat high-torque AC induction, rear axle mounted - -
    Cooling System Cat variable speed, hydraulically driven cooling system - -

    Braking System
    Service Brakes Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
    Front Wet Disc Brake Surface Area 22642 in² 20500 in² 9487 in²
    Rear - Wet Disc Brake Surface Area 32730 in² 30750 in² 13908 in²
    Standards Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011
    Electric Retarding Radial Grid Design - -
    Dynamic Retarding Power - Continuous 5480 HP - -
    Parking Brakes Four-corner, Multi-disc, Spring Applied, Hydraulically Released - -
    Load Brake Rear service brakes Rear service brakes -
    Note Anti-Lock Brake System (ABS) optional with CMD package Anti-Lock Brake System (ABS) optional with CMD package -
    Parking Brake - Four-corner, Multi-disc, Spring Applied, Hydraulically Released Four corner, multi disc, spring applied, hydraulically released

    Weight Distributions - Approximate
    Front Axle - Empty 47 % 47.20% 48%
    Rear Axle - Empty 53 % 52.80% 52%
    Front Axle - Loaded 33 % 33.30% 33%
    Rear Axle - Loaded 67 % 66.70% 67%
    Note Weight distributions optimized with Cat body. Weight distributions optimized with Cat body. Weight distributions optimized with Cat body.

    Capacity - HE Body - 100% fill factor
    Struck 129-200 m³ (168-261 yd³) - -
    Heaped (SAE 2:1) 218-276 m³ (285-361 yd³) - -
    Note Contact your local Cat dealer for body recommendations. - -

    Body Hoists
    Type Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve.
    Pump Flow - High Idle 257.3 gal/min 317 gal/min 192.7 gal/min
    Relief Valve Setting - Raise 3029 psi 3510 psi 2500 psi
    Body Raise Time - High Idle 21 s 25 s 15.2 s
    Body Lower Time - Float 22 s 18 s -
    Body Power Down- High Idle 17.5 s 18 s 15.9 s
    Note (1) Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages. - -
    Note (2) Power raise in both stages; power down capability in both stages. - -
    Note (3) Automatic body-lower modulation reduces impact on frame. - -
    Body Lower Time - Float High Idle - - 15.9 s
    Body Lower Time - Float Low Idle - - 16.2 s

    Suspension
    Type Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
    Effective Cylinder Stroke - Front 10 in 3.9 in 12.6 in
    Effective Cylinder Stroke - Rear 5 in 3.7 in 6.5 in
    Rear axle - Oscillation - ±3.96 degrees +/- 5 degrees

    Cab
    Air Conditioning HFC - 134A refrigerant: 21,600 Btu/h HFC - 134A refrigerant: 24,300 Btu/h HFC - 134A refrigerant: 24,500 Btu/h
    Heater / Defroster 24600 Btu/h 38900 Btu/h 33300 Btu/h
    Note Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning. Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
    ROPS Standards (1) ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
    FOPS Standards FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
    ROPS Standards (2) - ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. -

    Engine - High Altitude Only
    Engine Model Cat® C175-20 - -
    Gross Power SAE J1995:2014 4150 HP - -
    Net Power - SAE J1349:2011 4000 HP - -
    Rated Speed 1750 r/min - -
    Emissions Rating Fuel Optimized - -
    Bore 6.9 in - -
    Stroke 8.7 in - -
    Displacement 6469 in³ - -
    Note 1 Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. - -
    Note 2 Additional fuel optimized selectable power rating: 2983 kW / 4,000 hp - -

    Tires
    Rims 44" x 63" Rims 44" x 63" 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
    Standard Tires 59/80 R63 - -
    Note (1) Quick Change Rims optional. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Quick Change Rims optional.
    Note (2) Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. - Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
    Tires - 59/80 R63 -
    Note - Quick Change Rims optional. -
    Standard Tire - - 33.00R51
    Optional Tire - - 36.00R51

    Dimensions (Approximate)
    Height - Top of ROPS 22.1 ft - -
    Overall Length 51.44 ft - -
    Wheel Base 21.9 ft - -
    Rear Axle - Tail 16.07 ft - -
    Dump Clearance - Empty 5.72 ft - -
    Loading Height - Empty 25.54 ft - -
    Overall Height - Body Raised 48.85 ft - -
    Centerline Front Tire Width 23.06 ft - -
    Front Axle Clearance - Loaded 2.81 ft - -
    Overall Canopy Width (with rock deflectors) 33.15 ft - -
    Outside Body/Canopy Width (without rock deflectors) 31.62 ft - -
    Inside Body Width 29.44 ft - -
    Front Canopy Height - Empty 26.01 ft - -
    Rear Axle Clearance - Loaded 2.8 ft - -
    Centerline of Rear Dual Tire Width 19.5 ft - -
    Overall Tire Width - Empty 30.27 ft - -
    Overall Length (High Altitude only) 51.87 ft - -
    Note Dimensions listed includes canopy deflectors - -

    Sound
    Sound Standards The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - -

    Final Drives
    Type - Double reduction, planetary with full floating axles. Double reduction, planetary with full floating axles.
    Differential Ratio - 1.276:1 2:10:01
    Planetary Ratio - 16.67:1 10.83:1
    Total Reduction Ratio - 21.26:1 22.75:1
    Note - Double reduction, planetary with full floating axles. -

    Capacity - HP Body - 100% Fill Factor
    Struck - 225 yd³ / 172 m³ -
    Heaped (SAE 2:1)* - 330 yd³ / 252 m³ -
    Note (1) - Consult your local Cat dealer for body recommendations. -

    Transmission
    Forward - 1 - 6.6 mile/h 7.5 mile/h
    Forward - 2 - 8.9 mile/h 10.2 mile/h
    Forward - 3 - 12 mile/h 13.8 mile/h
    Forward - 4 - 16.2 mile/h 18.6 mile/h
    Forward - 5 - 21.8 mile/h 25.2 mile/h
    Forward - 6 - 29.4 mile/h 34 mile/h
    Forward - 7 - 39.5 mile/h -
    Reverse - 7.4 mile/h 6.8 mile/h
    Top Speed - Loaded - 39.5 mile/h 34 mile/h
    Note - - Maximum travel speeds with standard 33.00-R51 tires.

    Dimensions
    Rear Axle - Clearance - Loaded - 3.08 ft -
    Inside Body Depth - Maximum - 11 ft -
    Overall Height - Body Raised - 51.5 ft -
    Loaded Ground Clearance - 2.58 ft -
    Loading Height - Empty - 23 ft -
    Engine Guard Clearance - Loaded - 3.33 ft -
    Height - Top of ROPS - Empty - 21.4 ft -
    Front Canopy Height - Empty - 25.33 ft -
    Overall Body Length - 48.6 ft -
    Inside Body Length - 32.75 ft -
    Overall Length - 49.5 ft -
    Wheel Base - 23.58 ft -
    Rear Axle - Tail - 12.9 ft -
    Dump Clearance - 6.58 ft -
    Centerline Front Tire Width - 21.41 ft -
    Overall Canopy Width - 29.91 ft -
    Outside Body Width - 32 ft -
    Inside Body Width - 27.91 ft -
    Centerline of Rear Dual Tire Width - 20.41 ft -
    Overall Tire Width - 31.25 ft -

    Capacity - MSD II - 100% Fill Factor
    Struck - - 72 m^3 / 94 yd^3
    Heaped (SAE 2:1) - - 99 m^3 / 129 yd^3
    Note - - Consult your local Cat dealer for body recommendations.

    Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
    Height - Top of ROPS - - 17.09 ft
    Overall Body Length - - 39.32 ft
    Inside Body Length - - 27.29 ft
    Overall Length - - 39.23 ft
    Wheel Base - - 17 ft
    Rear Axle - Tail - - 12.56 ft
    Ground Clearance - - 3.29 ft
    Dump Clearance - - 3.7 ft
    Loading Height - Empty - - 17.39 ft
    Inside Body Depth - Maximum - - 9.15 ft
    Overall Height - Body Raised - - 39.48 ft
    Operating Width - - 24.72 ft
    Centerline Front Tire Width - - 15.91 ft
    Engine Guard Clearance - - 3.41 ft
    Overall Canopy Width - - 24.81 ft
    Outside Body Width - - 22 ft
    Inside Body Width - - 19.72 ft
    Front Canopy Height - - 19.8 ft
    Rear Axle - Clearance - - 3.25 ft
    Centerline of Rear Dual Tire Width - - 14.06 ft
    Overall Tire Width - - 20.59 ft
    Add a Similar Product:
    • 772G Off-Highway Truck Add
    • 775G Off-Highway Truck Add
    • 775 Off-Highway Truck Add
    • 772 (07) Off-Highway Truck Add
    • 770 Off-Highway Truck Add
    • 796 AC Electric Drive Mining Truck Add
    • 794 AC Mining Truck Add
    • 789 Next Generation Add
    • 793F Mining Truck Add