Compare Equipment Go Back
797F Mining Truck |
775G Off-Highway Truck |
772 (07) Off-Highway Truck |
|
Weights - Approximate |
|||
---|---|---|---|
Nominal Rated Payload | 400 ton (US) | - | - |
Rated Gross Machine Weight | 1375000 lb | - | - |
Chassis Weight | 474472 lb | - | 59223 lb |
Body Weight | 94799 lb | - | 17306 lb |
Note (1) | Consult your tire manufacturer for maximum tire load | - | - |
Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. | - | - |
Note (4) | Tier 4 Chassis Weight: 486263 lb (220565 kg) | - | - |
Target Gross Machine Operating Weight | - | - | 181000 lb |
Target Gross Machine Weight | - | - | 181000 lb |
Engine |
|||
Gross Power - SAE J1995 | 4000 HP | 825 HP | 605 HP |
Net Power - SAE J1349 | 3795 HP | - | 550 HP |
Engine Model | Cat® C175-20 | Cat® C27 | Cat® C18 |
Rated Speed | 1750 r/min | - | - |
Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards. | - | - |
Bore | 6.9 in | 5.4 in | 5.7 in |
Stroke | 8.7 in | 6 in | 7.2 in |
Displacement | 6469 in³ | 1648 in³ | 1105 in³ |
Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. | - | - |
Note (2) | U.S. EPA Tier 4 Final available for applicable markets. | - | - |
Note (3) | High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available. | - | - |
Rated Net Power - SAE J1349 | - | 683 HP | - |
Note | - | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Specifications shown are for LRC model. | - |
Rated Engine Speed | - | - | 1700 r/min |
Net Power - ISO 9249 | - | - | 550 HP |
Number of Cylinders | - | - | 6 |
Net Torque - SAE J1349 | - | - | 2221 ft-lb |
Engine Power - ISO 14396 | - | - | 598 HP |
Body Hoists |
|||
Type | Twin, two-stage hydraulic cylinders with snubbing valve. | - | - |
Pump Flow - High Idle | 317 gal/min | - | 112 gal/min |
Relief Valve Setting - Raise | 3510 psi | - | 2750 psi |
Body Raise Time - High Idle | 25 s | - | 8 s |
Body Lower Time - Float | 18 s | - | 10 s |
Body Power Down- High Idle | 18 s | - | - |
Relief Valve Setting - Lower | - | - | 500 psi |
Body Power Down - High Idle | - | - | 10 s |
Suspension |
|||
Type | Self-contained nitrogen/oil cylinders, rear strut pin-to-pin mounting, top & bottom double shear clevis attachments | - | - |
Effective Cylinder Stroke - Front | 3.9 in | - | - |
Effective Cylinder Stroke - Rear | 3.7 in | - | - |
Rear axle - Oscillation | ±3.96 degrees | - | 8.9 ° |
Empty Loaded Cylinder Stroke Front | - | - | 9.2 in |
Empty Loaded Cylinder Stroke Rear | - | - | 5.8 in |
Service Refill Capacities |
|||
Fuel Tank | 1000 gal (US) | - | 140 gal (US) |
Fuel Tank (Tier 4) | 1200 gal (US) | - | - |
Diesel Exhaust Fluid Tank | 100 gal (US) | - | - |
Cooling System | 306 gal (US) | 45 gal (US) | 33 gal (US) |
Crankcase | 103 gal (US) | 24 gal (US) | 17 gal (US) |
Front Wheels - Each | 16 gal (US) | - | - |
Differentials | 330 gal (US) | - | - |
Steering Tank | 67 gal (US) | - | 14.5 gal (US) |
Steering System - Including Tank | 95 gal (US) | 14 gal (US) | 23 gal (US) |
Brake/Hoist Tank | 203 gal (US) | - | - |
Brake Hoist System - Includes Tank | 489 gal (US) | - | - |
Torque Converter Sump | 80 gal (US) | - | - |
Torque Converter/Transmission System - Including Sump | 166 gal (US) | - | - |
Note (1) | DEF Tank only available for EPA Tier 4 engine option. | - | - |
Fuel Tank Capacity | - | 210 gal (US) | - |
Differential - Final Drives | - | 38 gal (US) | 47 gal (US) |
Brake/Hoist Hydraulic Tank | - | 46.5 gal (US) | 38 gal (US) |
Brake Hoist System | - | 85 gal (US) | 60 gal (US) |
Torque Converter - Transmission System | - | - | 17 gal (US) |
DEF Tank | - | - | 6 gal (US) |
Weight Distributions - Approximate |
|||
Front Axle - Empty | 47.20% | - | 51.4 % |
Rear Axle - Empty | 52.80% | - | 48.6 % |
Front Axle - Loaded | 33.30% | - | 34.2 % |
Rear Axle - Loaded | 66.70% | - | 65.8 % |
Note | Weight distributions optimized with Cat body. | - | - |
Final Drives |
|||
Type | Double reduction, planetary with full floating axles. | - | - |
Differential Ratio | 1.276:1 | - | 2.74:1 |
Planetary Ratio | 16.67:1 | - | 4.80:1 |
Total Reduction Ratio | 21.26:1 | - | 13.14:1 |
Note | Double reduction, planetary with full floating axles. | - | - |
Tires |
|||
Tires | 59/80 R63 | - | - |
Rims | 44" x 63" | - | - |
Note | Quick Change Rims optional. | - | - |
Note (1) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | - | - |
Standard Tire | - | - | 21.00R33 (E4) |
Braking System |
|||
Service Brakes | Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | - | - |
Front Wet Disc Brake Surface Area | 20500 in² | - | - |
Rear - Wet Disc Brake Surface Area | 30750 in² | - | - |
Standards | Service and Secondary: ISO 3450:2011 | - | - |
Parking Brake | Four-corner, Multi-disc, Spring Applied, Hydraulically Released | - | - |
Load Brake | Rear service brakes | - | - |
Note | Anti-Lock Brake System (ABS) optional with CMD package | - | - |
Capacity - HP Body - 100% Fill Factor |
|||
Struck | 225 yd³ / 172 m³ | - | - |
Heaped (SAE 2:1)* | 330 yd³ / 252 m³ | - | - |
Note (1) | Consult your local Cat dealer for body recommendations. | - | - |
Cab |
|||
Air Conditioning | HFC - 134A refrigerant: 24,300 Btu/h | - | - |
Heater / Defroster | 38900 Btu/h | - | - |
Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. | - | - |
ROPS Standards (1) | The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008. | - | - |
ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. | - | - |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. | - | - |
Steering |
|||
Steering Angle | 40 ° | - | - |
Turning Diameter - Front | 122.7 ft | - | 57.7 ft |
Steering Standards | ISO 5010:2007 | ISO 5010:2007 | ISO 5010:2007 |
Note | Turning Diameter (ISO 7457:2009) | - | - |
Steer Angle | - | 31 ° | 40.5 ° |
Turning Diameter | - | 77.1 ft | - |
Turning Circle - Clearance Diameter | - | 85.6 ft | 66.6 ft |
Transmission |
|||
Forward - 1 | 6.6 mile/h | 6.6 mile/h | 8 mile/h |
Forward - 2 | 8.9 mile/h | 9.3 mile/h | 10.9 mile/h |
Forward - 3 | 12 mile/h | 12.6 mile/h | 14.8 mile/h |
Forward - 4 | 16.2 mile/h | 16.8 mile/h | 19.8 mile/h |
Forward - 5 | 21.8 mile/h | 22.8 mile/h | 26.9 mile/h |
Forward - 6 | 29.4 mile/h | 30.7 mile/h | 36.2 mile/h |
Forward - 7 | 39.5 mile/h | 41.6 mile/h | 49.2 mile/h |
Reverse | 7.4 mile/h | 8.7 mile/h | 10.4 mile/h |
Top Speed - Loaded | 39.5 mile/h | - | - |
Note | - | Maximum travel speeds with standard 24.00R35 (E4) tires | - |
Dimensions |
|||
Rear Axle - Clearance - Loaded | 3.08 ft | - | - |
Inside Body Depth - Maximum | 11 ft | - | 5.7 ft |
Overall Height - Body Raised | 51.5 ft | - | 27.1 ft |
Loaded Ground Clearance | 2.58 ft | - | - |
Loading Height - Empty | 23 ft | - | 11.6 ft |
Engine Guard Clearance - Loaded | 3.33 ft | - | - |
Height - Top of ROPS - Empty | 21.4 ft | - | - |
Front Canopy Height - Empty | 25.33 ft | - | - |
Overall Body Length | 48.6 ft | - | 26.8 ft |
Inside Body Length | 32.75 ft | - | 19 ft |
Overall Length | 49.5 ft | - | 28.9 ft |
Wheel Base | 23.58 ft | - | 13 ft |
Rear Axle - Tail | 12.9 ft | - | 9.5 ft |
Dump Clearance | 6.58 ft | - | 1.5 ft |
Centerline Front Tire Width | 21.41 ft | - | 10.4 ft |
Overall Canopy Width | 29.91 ft | - | - |
Outside Body Width | 32 ft | - | 12.9 ft |
Inside Body Width | 27.91 ft | - | 11.9 ft |
Centerline of Rear Dual Tire Width | 20.41 ft | - | 8.7 ft |
Overall Tire Width | 31.25 ft | - | 12.9 ft |
Height - Top of ROPS | - | - | 12.8 ft |
Ground Clearance | - | - | 1.6 ft |
Operating Width | - | - | 15.7 ft |
Engine Guard Clearance | - | - | 2 ft |
Front Canopy Height | - | - | 13.7 ft |
Rear Axle - Clearance | - | - | 1.9 ft |
Weights |
|||
LRC Bare Chassis Weight without Hoist | - | 75118 lb | - |
LRC Bare Chassis Weight with Hoist | - | 76326 lb | - |
LRC Gross Vehicle Weight (Target) without Hoist | - | 246503 lb | - |
LRC Gross Vehicle Weight (Target) with Hoist | - | 246503 lb | - |
HRC Bare Chassis Weight without Hoist | - | 76573 lb | - |
HRC Bare Chassis Weight with Hoist | - | 77781 lb | - |
HRC Gross Vehicle Weight (Target) without Hoist | - | 246503 lb | - |
HRC Gross Vehicle Weight (Target) with Hoist | - | 246503 lb | - |
Note | - | LRC model is offered for lesser regulated countries. HRC model is offered for highly regulated countries. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. | - |
ROPS |
|||
Tractor ROPS | - | 85288 lb | - |
FOPS Standards | - | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
ROPS Standards | - | - | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
Operating Specifications |
|||
Nominal Water Tank Capacity | - | 15000 gal (US) | - |
Nominal Payload Class (100%) | - | - | 51.6 ton (US) |
Top Speed - Loaded | - | - | 49.2 mile/h |
Maximum Payload Class (110%) | - | - | 56.7 ton (US) |
Body Capacity - SAE 2:1 | - | - | 40.8 yd³ |
Target Payload Capacity | - | - | 51.6 ton (US) |
Not to Exceed Payload (120%) | - | - | 61.9 ton (US) |
Body Capacity (SAE 2:1)** | - | - | 40.8 yd³ |
Brakes |
|||
Brake Surface - Front | - | 257 in² | 216 in² |
Brake Surface - Rear | - | 9497 in² | 7794 in² |
Brake Standards | - | - | ISO 3450:1996 |
Capacity - Dual Slope - 100% Fill Factor |
|||
Heaped 2:1 (SAE) | - | - | 40.8 yd³ |
Struck | - | - | 31.3 yd³ |
Capacity - Flat Floor - 100% Fill Factor |
|||
Struck | - | - | 31.3 yd³ |
Heaped 2:1 (SAE) | - | - | 40.9 yd³ |
Sound |
|||
Sound Standards (3) | - | - | Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
Sound Standards (2) | - | - | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). |
Sound Standards (1) | - | - | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
Add a Similar Product: