CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    18 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP - 304 HP
    Engine Model Cat® C9.3 Cat® C9.3 Cat® C13
    Bore 4.5 in 4.5 in 5.1 in
    Stroke 5.9 in 5.9 in 6.2 in
    Speed at Rated Power 2,000 rpm 2,000 rpm 2,000 rpm
    VHP Plus - Gear - Net Power - Forward 1st 221 HP 179 HP -
    Standard Capability 109 °F 109 °F -
    Torque Rise 39% 38% -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP 231 HP -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP 200 HP -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP 210 HP -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP 189 HP -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP 220 HP -
    Maximum Torque - VHP Plus 1000 lb/ft 840 lb/ft -
    VHP Plus Range - Net 165-203 kW (221-272 hp) 133-172 kW (179-231 hp) -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP 225 HP -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP 179 HP -
    Base Power (1st Gear) - Net - Metric 224 HP 181 HP 309 HP
    High Ambient - Fan Speed - Standard 1,400 rpm 1,400 rpm -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP 215 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP 189 HP -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) 133-172 kW (181-234 hp) -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP 200 HP -
    Displacement 567.5 in³ 567.5 in³ 763 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft 10000 ft -
    High Ambient - Fan Speed - Maximum 1,550 rpm 1,550 rpm -
    High Ambient - Fan Speed - Minimum 500 rpm 500 rpm -
    High - Ambient Capability 122 °F 122 °F -
    Net Power Range (Tier 4) - 179 HP -
    Standard - Ambient Capability - - 122 °F
    VHP Range - Net - - 227-266 kW (304-357 hp)
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 1270 lb/ft
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 12176 ft
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 12973 ft
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 1270 lb/ft
    Standard - Fan Speed - Minimum - - 550 rpm
    Emissions (1) - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 40%
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 1306 lb/ft
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - - 12500 ft
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - - 38%
    Standard - Fan Speed - Maximum - - 1,450 rpm
    Emissions (2) - - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - - 38%
    VHP Range - Net - Metric - - 227-266 kW (309-362 hp)
    Emissions (3) - - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards
    Optimized VHP Range - Net - - 227-266 kW (304-357 hp)

    Weights
    Operating Weight - Typically Equipped 45547 lb 42647 lb 74324 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb 38069 lb -
    Gross Vehicle Weight - Base - Front Axle 9907 lb 9343 lb -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb 28077 lb -
    Gross Vehicle Weight - Maximum - Total 55144 lb 55144 lb -
    Operating Weight - Typically Equipped - Front Axle 13237 lb 12055 lb -
    Gross Vehicle Weight - Base - Total 38719 lb 37420 lb -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb 17075 lb -
    Operating Weight - Typically Equipped - Total 45547 lb 42647 lb -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb 30592 lb -

    Moldboard
    Blade Width 14 ft 12 ft 18 ft
    Moldboard - Height 24 in 24 in -
    Moldboard - Thickness 0.87 in 0.87 in -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 5 in
    Cutting Edge Width 6 in 6 in 10 in
    Cutting Edge Thickness 0.6 in 0.6 in 1.4 in
    End Bit - Width 6 in 6 in 6 in
    End Bit - Thickness 0.6 in 0.6 in 0.75 in
    Blade Pull - Base GVW 25931 lb 25269 lb -
    Blade Pull - Maximum GVW 34262 lb 34262 lb -
    Blade Down Pressure - Base GVW 17004 lb 16038 lb -
    Blade Down Pressure - Maximum GVW 29308 lb 29309 lb -
    Moldboard - Blade Width 14 ft 12 ft -
    Down Force - Maximum GVW - - 43861 lb
    Blade Pull* - Base GVW - - 47216 lb
    Blade Pull* - Maximum GVW - - 52878 lb
    Down Force - Base GVW - - 34008 lb
    Thickness - - 1 in
    Width - - 18 ft
    Height - - 31 in
    Note - - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

    Operating Specifications
    Top Speed - Forward 29.5 mile/h 29 mile/h 32.1 mile/h
    Top Speed - Reverse 23.3 mile/h 23 mile/h 25.3 mile/h
    Turning Radius - Outside Front Tires 25.59 ft 25.59 ft 30.5 ft
    Steering Range - Left/Right 50° 50° 47.5°
    Articulation Angle - Left/Right 20° 20° 20°
    Forward - 1st 2.6 mile/h 2.5 mile/h 2.8 mile/h
    Forward - 2nd 3.5 mile/h 3.4 mile/h 3.8 mile/h
    Forward - 3rd 5.1 mile/h 5 mile/h 5.5 mile/h
    Forward - 4th 7 mile/h 6.9 mile/h 7.6 mile/h
    Forward - 5th 10.8 mile/h 10.6 mile/h 11.8 mile/h
    Forward - 6th 14.7 mile/h 14.5 mile/h 16 mile/h
    Forward - 7th 20.3 mile/h 19.9 mile/h 22 mile/h
    Forward - 8th 29.5 mile/h 29 mile/h 32.1 mile/h
    Reverse - 1st 2 mile/h 2 mile/h 2.2 mile/h
    Reverse - 2nd 3.8 mile/h 3.7 mile/h 4.1 mile/h
    Reverse - 3rd 5.5 mile/h 5.4 mile/h 6 mile/h
    Reverse - 4th 8.5 mile/h 8.4 mile/h 9.3 mile/h
    Reverse - 5th 16 mile/h 15.7 mile/h 17.4 mile/h
    Reverse - 6th 23.3 mile/h 23 mile/h 25.3 mile/h
    Note - - Calculated with no slip and 23.5R25 L-3 tires.

    Service Refill
    Fuel Capacity 104 gal (US) 104 gal (US) 131 gal (US)
    Cooling System 15 gal (US) 15 gal (US) 18.5 gal (US)
    Hydraulic System - Total 26.4 gal (US) 26.4 gal (US) 38.6 gal (US)
    Hydraulic System - Tank 16.9 gal (US) 16.9 gal (US) 18.5 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) 18.5 gal (US) 26 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) 5.8 gal (US) -
    Engine Oil 7.9 gal (US) 7.9 gal (US) 9.5 gal (US)
    Tandem Housing - Each 22.9 gal (US) 20 gal (US) 34 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.13 gal (US) 0.24 gal (US)
    Circle Drive Housing 1.8 gal (US) 1.8 gal (US) 2.6 gal (US)
    DEF Tank - - 4.2 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift Direct drive, power shift, countershaft
    Brakes - Service Multiple Oil Disc Multiple Oil Disc Oil-actuated, oil disc
    Brakes - Service - Surface Area 3565 in² 3565 in² -
    Brakes - Parking Multiple Oil Disc Multiple Oil Disc Spring applied, hydraulically released
    Brakes - Secondary Dual Circuit Control Dual Circuit Oil-actuated, oil-disc
    Brakes - Dynamic Brake Torque per Wheel - - 27069.27 lb/ft

    Hydraulic System
    Circuit Type Parallel Parallel Electro-hydraulic load sensing, closed center
    Pump Type Variable Piston Variable Piston Variable piston
    Pump Output 55.5 gal/min 55.7 gal/min -
    Maximum System Pressure 3503 psi 3500 psi 3590 psi
    Reservoir Tank Capacity 16.9 gal (US) 16.9 gal (US) -
    Standby Pressure 885 psi 885 psi 856 psi
    Pump Output* - - 74 gal/min
    Note - - *Pump output measured at 2,150 rpm.

    Frame
    Drawbar - Width 3 in 3 in 3 in
    Circle - Diameter 61.1 in 60.2 in 71.7 in
    Circle - Blade Beam Thickness 1.6 in 1.6 in 2 in
    Drawbar - Height 6 in 6 in 8 in
    Front Frame Structure - Width 12 in 12 in 14 in
    Circle - Height 6.3 in 5.4 in -
    Front Frame Structure - Height 12.6 in 12.6 in 18.1 in
    Drawbar - Thickness 0.5 in 0.5 in -
    Front-Top/Bottom Plate - Width 12 in 12 in -
    Front-Top/Bottom Plate - Thickness 0.87 in 0.87 in -
    Front Axle - Height to Center 23.5 in 23.5 in 26.4 in
    Front Axle - Wheel Lean - Left/Right 18° 18° -
    Front Axle - Total Oscillation per Side 32° 32° 35°
    Front Frame Structure - Thickness - - 0.6 in
    Front Axle - Wheel Lean - - 18° Left/17° Right

    Blade Range
    Circle Centershift - Right 28.7 in 28.7 in 22 in
    Circle Centershift - Left 27.4 in 27.4 in 27.2 in
    Moldboard Sideshift - Right 26 in 26 in 31.1 in
    Moldboard Sideshift - Left 20.1 in 20.1 in 29.1 in
    Maximum Blade Position Angle 90° 90° 65°
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Lift Above Ground 17.8 in 18.9 in 15.7 in
    Maximum Depth of Cut 29.5 in 28.1 in 18.5 in
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in 70.5 in 103 in
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in 77.9 in 103 in

    Ripper
    Ripping Depth - Maximum 16.8 in 16.8 in 17.8 in
    Ripper Shank Holder Spacing 21 in 21 in -
    Ripper Shank Holders 5 5 7
    Penetration Force 20812 lb 20812 lb 30311 lb
    Pry-Out Force 28493 lb 27794 lb 43700 lb
    Machine Length Increase, Beam Raised 40.6 in 40.6 in 63.4 in
    Shank Holder Spacing - Minimum - - 17.5 in
    Shank Holder Spacing - Maximum - - 20 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in 18.4 in -
    Mid, V-Type - Working Width 46.6 in 46.6 in -
    Rear - Scarifying Depth, Maximum 16.8 in 16.8 in -
    Front, V-Type - Working Width 47.4 in 47.4 in -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in 4.6 in -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in 11.5 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 11-May -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in 40.6 in -
    Mid, V-Type - Scarifier Shank Holders 11 11 -
    Rear - Working Width 84 in 84 in -
    Rear - Scarifier Shank Holders 9 9 -
    Rear - Scarifier Shank Holder Spacing 10.5 in 10.5 in -

    Standards
    Brakes ISO 3450 ISO 3450 ISO 3450: 2011
    ROPS/FOPS ISO 3471; ISO 3449 ISO 3471/ISO 3449 ISO 3471: 2008/ISO 3449: 2005
    Steering ISO 5010 ISO 5010 ISO 5010: 2007
    Sound ISO 6394; ISO 6395 ISO 6394; ISO 6395 ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -

    Tandems
    Height 22.5 in 19.9 in 25.5 in
    Width 8 in 7.9 in 9.3 in
    Sidewall Thickness - Inner 0.69 in 0.63 in 0.9 in
    Sidewall Thickness - Outer 0.71 in 0.71 in 0.9 in
    Drive Chain Pitch 2 in 2 in 2.5 in
    Wheel Axle Spacing 60 in 60 in 72.5 in
    Tandem Oscillation - Front Up 15° 15° 15°
    Tandem Oscillation - Front Down 25° 25° 25°

    Dimensions
    Height - Top of Cab 130 in 130 in -
    Length - Counterweight to Ripper 399 in 399 in -
    Width - Outside Front Tires 98.9 in 98.9 in -
    Length - Front Axle to Mid Tandem 241 in 241 in -
    Length - Front Tire to Rear of Machine 351 in 351 in -
    Length - Front Axle to Moldboard 100 in 100 in -
    Length - Between Tandem Axles 60 in 60 in -
    Width - Outside Rear Tires 98.9 in 98.9 in -
    Width - Tire Center Lines 84.3 in 84.3 in -
    Height - Front Axle Center 23.5 in 23.5 in -
    Height - Exhaust Stack 128 in 128 in -
    Height - Top of Cylinders 120 in 120 in -
    Ground Clearance - Rear Axle 13.3 in 13.3 in -

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 53830 lb
    Gross Vehicle Weight - Base** - Total - - 72298 lb
    Gross Vehicle Weight - Maximum Tested - Rear Axle - - 58753 lb
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 20494 lb
    Gross Vehicle Weight - Base** - Front Axle - - 19837 lb
    Gross Vehicle Weight - Maximum Tested - Total - - 84877 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 74324 lb
    Gross Vehicle Weight - Base** - Rear Axle - - 52461 lb
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab.
    Note (1) - - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt.

    Dimensions (Approximate)
    Height - Top of Cylinders - - 122.6 in
    Width - Outside Rear Tires - - 134.3 in
    Height - Exhaust Stack - - 141.1 in
    Length - Between Tandem Axles - - 72.5 in
    Length - Front Axle to Mid Tandem - - 290 in
    Width - Tire Center Lines - - 106.4 in
    Length - Front Axle to Moldboard - - 120.7 in
    Length - Counterweight to Ripper - - 474.4 in
    Height - Front Axle Center - - 29.9 in
    Width - Outside Front Tires - - 134.3 in
    Length - Front Tire to Rear of Machine - Including Tow Hitch - - 417 in
    Height - Top of Cab - - 147.5 in
    Ground Clearance - Rear Axle - - 16.7 in

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - - 309 HP
    Gear - Forward 2nd - - 309 HP
    Gear - Reverse 2nd - - 309 HP
    Gear - Forward 4th - - 325 HP
    Gear - Forward 6th - - 341 HP
    Gear - Forward 5th - - 332 HP
    Gear - Forward 8th - - 362 HP
    Gear - Reverse 1st - - 309 HP
    Gear - Forward 3rd - - 315 HP
    Gear - Forward 7th - - 347 HP
    Gear - Reverse 3rd-6th - - 315 HP

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - - Tires: 23.5R25 Bridgestone VKT 1 Star
    Wheel Group - 19.5×25 MP (1) - - Tires: 23.5R25 Bridgestone VKT 2 Star
    Wheel Group - 19.5×25 MP (3) - - Tires: 23.5R25 Bridgestone VJT 1 Star
    Wheel Group - 19.5×25 MP (4) - - Tires: 23.5R25 Michelin XHA 2 Star
    Wheel Group - 19.5×25 MP (5) - - Tires: 23.5R25 Michelin XLDD 2 Star L5

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - - 321 HP
    Gear - Reverse 2nd - - 304 HP
    Gear - Forward 1st - - 304 HP
    Gear - Reverse 3rd-6th - - 311 HP
    Gear - Forward 3rd - - 311 HP
    Gear - Forward 5th - - 327 HP
    Gear - Forward 7th - - 342 HP
    Gear - Forward 2nd - - 304 HP
    Gear - Reverse 1st - - 304 HP
    Gear - Forward 6th - - 337 HP
    Gear - Forward 8th - - 357 HP
    Add a Similar Product: