CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    18 Motor Grader
    View Product Remove
    24 Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP 304 HP - -
    Engine Model Cat® C9.3 Cat® C13 Cat C27 Cat C9.3
    Bore 4.5 in 5.1 in 5.4 in 4.5 in
    Stroke 5.9 in 6.2 in 6 in 5.9 in
    Speed at Rated Power 2,000 rpm 2,000 rpm - -
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - - -
    Standard Capability 109 °F - 122 °F 109 °F
    Torque Rise 39% - - -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - - -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - - -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - - -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - - -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - - -
    Maximum Torque - VHP Plus 1000 lb/ft - - -
    VHP Plus Range - Net 165-203 kW (221-272 hp) - - -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - - -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - - -
    Base Power (1st Gear) - Net - Metric 224 HP 309 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - - -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - - -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - - -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - - -
    Displacement 567.5 in³ 763 in³ 1648 in³ 567.5 in³
    Number of Cylinders 6 6 12 6
    Derating Altitude 10000 ft - - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - - -
    High Ambient - Fan Speed - Minimum 500 rpm - - -
    High - Ambient Capability 122 °F - - -
    Standard - Ambient Capability - 122 °F - -
    VHP Range - Net - 227-266 kW (304-357 hp) - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft - -
    Standard - Fan Speed - Minimum - 550 rpm - -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 40% - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 1306 lb/ft - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 12500 ft - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 38% - -
    Standard - Fan Speed - Maximum - 1,450 rpm - -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 38% - -
    VHP Range - Net - Metric - 227-266 kW (309-362 hp) - -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - -
    Optimized VHP Range - Net - 227-266 kW (304-357 hp) - -
    Net Power - EEC 80/1269 - - 535 HP 250 HP
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Note (3) - - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - - Optimized VHP Plus is standard for the 24. -
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) -
    Net Power - ISO 9249/SAE J1349 - - - 250 HP
    Engine RPM - - - 2,000
    Torque Rise - ISO 9294 - - - 44%

    Weights
    Operating Weight - Typically Equipped 45547 lb 74324 lb 165314 lb 20236 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - -
    Gross Vehicle Weight - Base - Front Axle 9907 lb - - -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - - -
    Operating Weight - Typically Equipped - Front Axle 13237 lb - - -
    Gross Vehicle Weight - Base - Total 38719 lb - - -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - -
    Operating Weight - Typically Equipped - Total 45547 lb - - -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - - -

    Moldboard
    Blade Width 14 ft 18 ft 24 ft 12 ft
    Moldboard - Height 24 in - - -
    Moldboard - Thickness 0.87 in - - -
    Arc Radius 16.3 in 16.3 in - 16.3 in
    Throat Clearance 6.5 in 5 in - 6.5 in
    Cutting Edge Width 6 in 10 in - -
    Cutting Edge Thickness 0.6 in 1.4 in - -
    End Bit - Width 6 in 6 in - -
    End Bit - Thickness 0.6 in 0.75 in - -
    Blade Pull - Base GVW 25931 lb - - -
    Blade Pull - Maximum GVW 34262 lb - - -
    Blade Down Pressure - Base GVW 17004 lb - - -
    Blade Down Pressure - Maximum GVW 29308 lb - - -
    Moldboard - Blade Width 14 ft - - -
    Down Force - Maximum GVW - 43861 lb - -
    Blade Pull* - Base GVW - 47216 lb - -
    Blade Pull* - Maximum GVW - 52878 lb - -
    Down Force - Base GVW - 34008 lb - -
    Thickness - 1 in - -
    Width - 18 ft - -
    Height - 31 in - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Blade Height - - 40 in -
    Cutting Edge - - - 6 in
    End Bit - - - 6 in

    Operating Specifications
    Top Speed - Forward 29.5 mile/h 32.1 mile/h - -
    Top Speed - Reverse 23.3 mile/h 25.3 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft 30.5 ft - -
    Steering Range - Left/Right 50° 47.5° - -
    Articulation Angle - Left/Right 20° 20° - -
    Forward - 1st 2.6 mile/h 2.8 mile/h - -
    Forward - 2nd 3.5 mile/h 3.8 mile/h - -
    Forward - 3rd 5.1 mile/h 5.5 mile/h - -
    Forward - 4th 7 mile/h 7.6 mile/h - -
    Forward - 5th 10.8 mile/h 11.8 mile/h - -
    Forward - 6th 14.7 mile/h 16 mile/h - -
    Forward - 7th 20.3 mile/h 22 mile/h - -
    Forward - 8th 29.5 mile/h 32.1 mile/h - -
    Reverse - 1st 2 mile/h 2.2 mile/h - -
    Reverse - 2nd 3.8 mile/h 4.1 mile/h - -
    Reverse - 3rd 5.5 mile/h 6 mile/h - -
    Reverse - 4th 8.5 mile/h 9.3 mile/h - -
    Reverse - 5th 16 mile/h 17.4 mile/h - -
    Reverse - 6th 23.3 mile/h 25.3 mile/h - -
    Note - Calculated with no slip and 23.5R25 L-3 tires. - -

    Service Refill
    Fuel Capacity 104 gal (US) 131 gal (US) - -
    Cooling System 15 gal (US) 18.5 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) 38.6 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) 18.5 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) 26 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - - -
    Engine Oil 7.9 gal (US) 9.5 gal (US) - -
    Tandem Housing - Each 22.9 gal (US) 34 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.24 gal (US) - -
    Circle Drive Housing 1.8 gal (US) 2.6 gal (US) - -
    DEF Tank - 4.2 gal (US) - -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift Direct drive, power shift, countershaft - -
    Brakes - Service Multiple Oil Disc Oil-actuated, oil disc - -
    Brakes - Service - Surface Area 3565 in² - - -
    Brakes - Parking Multiple Oil Disc Spring applied, hydraulically released - -
    Brakes - Secondary Dual Circuit Control Oil-actuated, oil-disc - -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft - -

    Hydraulic System
    Circuit Type Parallel Electro-hydraulic load sensing, closed center - -
    Pump Type Variable Piston Variable piston - -
    Pump Output 55.5 gal/min - - -
    Maximum System Pressure 3503 psi 3590 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - - -
    Standby Pressure 885 psi 856 psi - -
    Pump Output* - 74 gal/min - -
    Note - *Pump output measured at 2,150 rpm. - -

    Frame
    Drawbar - Width 3 in 3 in - -
    Circle - Diameter 61.1 in 71.7 in - -
    Circle - Blade Beam Thickness 1.6 in 2 in - -
    Drawbar - Height 6 in 8 in - -
    Front Frame Structure - Width 12 in 14 in - -
    Circle - Height 6.3 in - - -
    Front Frame Structure - Height 12.6 in 18.1 in - -
    Drawbar - Thickness 0.5 in - - -
    Front-Top/Bottom Plate - Width 12 in - - -
    Front-Top/Bottom Plate - Thickness 0.87 in - - -
    Front Axle - Height to Center 23.5 in 26.4 in - -
    Front Axle - Wheel Lean - Left/Right 18° - - -
    Front Axle - Total Oscillation per Side 32° 35° - -
    Front Frame Structure - Thickness - 0.6 in - -
    Front Axle - Wheel Lean - 18° Left/17° Right - -

    Blade Range
    Circle Centershift - Right 28.7 in 22 in - -
    Circle Centershift - Left 27.4 in 27.2 in - -
    Moldboard Sideshift - Right 26 in 31.1 in - -
    Moldboard Sideshift - Left 20.1 in 29.1 in - -
    Maximum Blade Position Angle 90° 65° - -
    Blade Tip Range - Forward 40° 40° - -
    Blade Tip Range - Backward 5° 5° - -
    Maximum Lift Above Ground 17.8 in 15.7 in 16.1 in 18.9 in
    Maximum Depth of Cut 29.5 in 18.5 in 21.7 in 28.9 in
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in 103 in - -
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in 103 in - -

    Ripper
    Ripping Depth - Maximum 16.8 in 17.8 in - -
    Ripper Shank Holder Spacing 21 in - - -
    Ripper Shank Holders 5 7 - -
    Penetration Force 20812 lb 30311 lb - -
    Pry-Out Force 28493 lb 43700 lb - -
    Machine Length Increase, Beam Raised 40.6 in 63.4 in - -
    Shank Holder Spacing - Minimum - 17.5 in - -
    Shank Holder Spacing - Maximum - 20 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - -
    Mid, V-Type - Working Width 46.6 in - - -
    Rear - Scarifying Depth, Maximum 16.8 in - - -
    Front, V-Type - Working Width 47.4 in - - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - -
    Mid, V-Type - Scarifier Shank Holders 11 - - -
    Rear - Working Width 84 in - - -
    Rear - Scarifier Shank Holders 9 - - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - - -

    Standards
    Brakes ISO 3450 ISO 3450: 2011 - -
    ROPS/FOPS ISO 3471; ISO 3449 ISO 3471: 2008/ISO 3449: 2005 - -
    Steering ISO 5010 ISO 5010: 2007 - -
    Sound ISO 6394; ISO 6395 ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - - -

    Tandems
    Height 22.5 in 25.5 in - -
    Width 8 in 9.3 in - -
    Sidewall Thickness - Inner 0.69 in 0.9 in - -
    Sidewall Thickness - Outer 0.71 in 0.9 in - -
    Drive Chain Pitch 2 in 2.5 in - -
    Wheel Axle Spacing 60 in 72.5 in - -
    Tandem Oscillation - Front Up 15° 15° - -
    Tandem Oscillation - Front Down 25° 25° - -

    Dimensions
    Height - Top of Cab 130 in - - -
    Length - Counterweight to Ripper 399 in - - -
    Width - Outside Front Tires 98.9 in - - -
    Length - Front Axle to Mid Tandem 241 in - - -
    Length - Front Tire to Rear of Machine 351 in - - -
    Length - Front Axle to Moldboard 100 in - - -
    Length - Between Tandem Axles 60 in - - -
    Width - Outside Rear Tires 98.9 in - - -
    Width - Tire Center Lines 84.3 in - - -
    Height - Front Axle Center 23.5 in - - -
    Height - Exhaust Stack 128 in - - -
    Height - Top of Cylinders 120 in - - -
    Ground Clearance - Rear Axle 13.3 in - - -
    Basic Blade Width - - - 140 in
    Length of Machine* - - - 397.6 in
    Width - - - 97.6 in
    Note - - - *Typically equipped with push block and ripper.
    Maximum Height - - - 132 in

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 53830 lb - -
    Gross Vehicle Weight - Base** - Total - 72298 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 20494 lb - -
    Gross Vehicle Weight - Base** - Front Axle - 19837 lb - -
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 74324 lb - -
    Gross Vehicle Weight - Base** - Rear Axle - 52461 lb - -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. - -
    Note (1) - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. - -

    Dimensions (Approximate)
    Height - Top of Cylinders - 122.6 in - -
    Width - Outside Rear Tires - 134.3 in - -
    Height - Exhaust Stack - 141.1 in - -
    Length - Between Tandem Axles - 72.5 in - -
    Length - Front Axle to Mid Tandem - 290 in - -
    Width - Tire Center Lines - 106.4 in - -
    Length - Front Axle to Moldboard - 120.7 in - -
    Length - Counterweight to Ripper - 474.4 in - -
    Height - Front Axle Center - 29.9 in - -
    Width - Outside Front Tires - 134.3 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in - -
    Height - Top of Cab - 147.5 in - -
    Ground Clearance - Rear Axle - 16.7 in - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - 309 HP - -
    Gear - Forward 2nd - 309 HP - -
    Gear - Reverse 2nd - 309 HP - -
    Gear - Forward 4th - 325 HP - -
    Gear - Forward 6th - 341 HP - -
    Gear - Forward 5th - 332 HP - -
    Gear - Forward 8th - 362 HP - -
    Gear - Reverse 1st - 309 HP - -
    Gear - Forward 3rd - 315 HP - -
    Gear - Forward 7th - 347 HP - -
    Gear - Reverse 3rd-6th - 315 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - 321 HP - -
    Gear - Reverse 2nd - 304 HP - -
    Gear - Forward 1st - 304 HP - -
    Gear - Reverse 3rd-6th - 311 HP - -
    Gear - Forward 3rd - 311 HP - -
    Gear - Forward 5th - 327 HP - -
    Gear - Forward 7th - 342 HP - -
    Gear - Forward 2nd - 304 HP - -
    Gear - Reverse 1st - 304 HP - -
    Gear - Forward 6th - 337 HP - -
    Gear - Forward 8th - 357 HP - -

    Machine Weight
    Weight* - - 161695 lb 42325 lb
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb
    Add a Similar Product: