CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    120 GC
    View Product
    24 Motor Grader
    View Product Remove

    Engine
    Net Power - ISO 9249/SAE J1349 171 HP - -
    Stroke 5 in 6 in -
    Derating Altitude 9842 ft - -
    Bore 4.1 in 5.4 in -
    Engine Model Cat® C4.4 Cat C27 -
    Torque Rise - ISO 9294 21% - -
    Maximum Torque 544 lb/ft - -
    Displacement 268.5 in³ 1648 in³ -
    Engine Power AWD (ISO 14396) 128 kW - -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II -
    Net Power - EEC 80/1269 - 535 HP -
    Note (3) - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - Optimized VHP Plus is standard for the 24. -
    Standard Capability - 122 °F -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) -
    Number of Cylinders - 12 -

    Weights
    Operating Weight - Typically Equipped 14496 lb 165314 lb -

    Moldboard
    Blade Width 12 ft 24 ft -
    Cutting Edge Width 6 in - -
    Throat Clearance 4.7 in - -
    Arc Radius 16.3 in - -
    End Bit - Width 152 in - -
    Blade Height 20 in 40 in -

    Machine Weight
    All-Wheel Drive (AWD) Weight 36376 lb - -
    Weight* - 161695 lb -

    Dimensions
    Length of Machine* 391.4 in - -
    Maximum Height 149.1 in - -
    Width 94.6 in - -
    Note *Typically equipped with push block and ripper. - -

    Blade Range
    Blade Tip Range - Backward 5° - -
    Moldboard Sideshift - Right 26.1 in - -
    Moldboard Sideshift - Left 20.2 in - -
    Maximum Lift Above Ground 16.1 in 16.1 in -
    Circle Centershift - Left 25.8 in - -
    Blade Tip Range - Forward 40° - -
    Circle Centershift - Right 25.8 in - -
    Maximum Depth of Cut 30.5 in 21.7 in -

    Service Refill Capacities
    Cooling System 10.3 gal (US) - -
    Circle Drive without Slip Clutch 0.4 gal (US) - -
    Hydraulic System 14.5 gal (US) - -
    Circle Drive with Slip Clutch 1.8 gal (US) - -
    Transmission 4.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 3.2 gal (US) - -
    Fuel Tank 71 gal (US) - -
    Engine Crankcase 2 gal (US) - -

    Sustainability
    Recyclability 92% - -
    Add a Similar Product: