Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner,
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
-
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards
U.S. EPA Tier 4 Final/EU Stage V
-
Engine Power (ISO 14396)
-
196 HP
-
Engine RPM
-
2,200
-
Standard Capability
-
109 °F
-
High - Ambient Capability
-
122 °F
-
Maximum Torque - ISO 9249
-
616 lb/ft
-
Number of Cylinders
-
6
-
Note (2)
-
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (3)
-
Power as declared per ISO 14396
-
Weights
Operating Weight - Typically Equipped
14496 lb
38912 lb
-
Note
-
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
-
Moldboard
Blade Width
12 ft
12 ft
-
Cutting Edge Width
6 in
6 in
-
Throat Clearance
4.7 in
4.4 in
-
Arc Radius
16.3 in
16.3 in
-
End Bit - Width
152 in
-
-
Blade Height
20 in
24 in
-
End Bit
-
6 in
-
Machine Weight
All-Wheel Drive (AWD) Weight
36376 lb
-
-
Dimensions
Length of Machine*
391.4 in
406.7 in
-
Maximum Height
149.1 in
132.4 in
-
Width
94.6 in
95.6 in
-
Note
*Typically equipped with push block and ripper.
*Typically equipped with push block and ripper.
-
Width All Wheel Drive (AWD)
-
99.3 in
-
Blade Range
Blade Tip Range - Backward
5°
-
-
Moldboard Sideshift - Right
26.1 in
-
-
Moldboard Sideshift - Left
20.2 in
-
-
Maximum Lift Above Ground
16.1 in
18.7 in
-
Circle Centershift - Left
25.8 in
-
-
Blade Tip Range - Forward
40°
-
-
Circle Centershift - Right
25.8 in
-
-
Maximum Depth of Cut
30.5 in
28.1 in
-
Circle Center Shift Left
-
29.6 in
-
Circle Center Shift Right
-
28.7 in
-
Maximum Shoulder Reach Left
-
74.3 in
-
Maximum Shoulder Reach Right
-
71.3 in
-
Moldboard Side Shift Left
-
25.6 in
-
Moldboard Side Shift Right
-
20.7 in
-
Blade Tip Range Backward
-
5
-
Blade Tip Range Forward
-
40
-
Service Refill Capacities
Cooling System
10.3 gal (US)
40 l
-
Circle Drive without Slip Clutch
0.4 gal (US)
0.5 gal (US)
-
Hydraulic System
14.5 gal (US)
11.9 gal (US)
-
Circle Drive with Slip Clutch
1.8 gal (US)
2 gal (US)
-
Transmission
4.5 gal (US)
4.8 gal (US)
-
Diesel Exhaust Fluid Tank (Tier 4 Only)
3.2 gal (US)
4.2 gal (US)
-
Fuel Tank
71 gal (US)
78 gal (US)
-
Engine Crankcase
2 gal (US)
5.5 gal (US)
-
Sustainability
Recyclability
92%
-
-
Air Conditioning System
Note
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.