Compare Equipment Go Back
 MH3026 Wheel Material Handler |
|
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat C7.1 | - | - |
| Net Power - ISO 9249 | 171 HP | - | - |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | - | - |
| Engine Power - Maximum - ISO 14396 | 174 HP | - | - |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | - | - |
| Bore | 4.1 in | - | - |
| Stroke | 5.3 in | - | - |
| Displacement | 427.8 in³ | - | - |
| Biodiesel Capability | Up to B20¹ | - | - |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - | - |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | - | - |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - | - |
Machine Weights |
|||
| Maximum Operating Weight | 64370 lb | - | - |
| Minimum Operating Weight | 58200 lb | - | - |
Working Ranges |
|||
| Maximum Reach | 42.7 ft | - | - |
| Boom | MH Boom 7.5 m (24'7") | - | - |
| Stick | Drop Nose 6.0 m (19'8") | - | - |
| Maximum Height | 46.9 ft | - | - |
| Minimum Dump Height | 12.5 ft | - | - |
| Maximum Reach at Ground Line | 42.2 ft | - | - |
| Maximum Depth | 9.8 ft | - | - |
| Boom Pin Height | 30.5 ft | - | - |
Transmission |
|||
| Maximum Gradeability (23 500 kg/51,810 lb) | 52 | - | - |
| Maximum Travel Speed (with steering wheel) | 12.4 mile/h | - | - |
| Maximum Travel Speed (with joysticks) | 9.3 mile/h | - | - |
| Drawbar Pull | 28551 lb/ft | - | - |
Hydraulic System |
|||
| Maximum Pressure - Implements | 5366 psi | - | - |
| Maximum Pressure - Travel | 5076 psi | - | - |
| Maximum Pressure - Swing | 5656 psi | - | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 109.9 gal (US) | - | - |
| Engine Oil | 5.3 gal (US) | - | - |
| Hydraulic Tank | 55.2 gal (US) | - | - |
| Hydraulic System - Including Tank | 91.1 gal (US) | - | - |
| Rear Axle - Housing (Differential) | 3.7 gal (US) | - | - |
| Front Steering Axle - Differential | 2.9 gal (US) | - | - |
| Powershift Transmission | 0.7 gal (US) | - | - |
Service Refill Capabilities |
|||
| Diesel Exhaust Fluid Tank | 7.9 gal (US) | - | - |
| Cooling System | 10.6 gal (US) | - | - |
| Final Drive - Each | 0.7 gal (US) | - | - |
Swing Mechanism |
|||
| Maximum Swing Torque | 51800 ft·lbf | - | - |
Dimensions |
|||
| Boom | MH Boom 7.5 m (24'7") | - | - |
| Stick | Drop Nose 6.0 m (19'8") | - | - |
| Shipping Height (with OPG, without stick) | 11.1 ft | - | - |
| Shipping Length | 35.1 ft | - | - |
| Shipping Length (with push blade) | 36.8 ft | - | - |
| Machine Length | 17.9 ft | - | - |
| Machine Length (with push blade) | 20.1 ft | - | - |
| Tail Swing Radius | 9.2 ft | - | - |
| Counterweight Clearance | 4.3 ft | - | - |
| Cab Height- Lowered | 11 ft | - | - |
| Cab Height-Lowered with OPG | 11.1 ft | - | - |
| Cab Height-Raised | 18.9 ft | - | - |
| Cab Height-Raised with OPG | 5775 mm | - | - |
| Wheel Base | 9 ft | - | - |
| Shipping Width | 9.9 ft | - | - |
| Ground Clearance | 1.1 ft | - | - |
| Undercarriage Length | 17.4 ft | - | - |
| Undercarriage Length (with push blade) | 19.6 ft | - | - |
| Upper Frame Width (including handrails) | 9 ft | - | - |
