Compare Equipment Go Back

MH3022 Wheel Material Handler

Engine

Engine Model Cat C4.4 - -
Net Power - ISO 9249 145 HP - -
Net Power - ISO 9249 (DIN) 147 hp (metric) - -
Engine Power - Maximum - ISO 14396 148 HP - -
Engine Power - ISO 14396 (DIN) 150 hp (metric) - -
Bore 4.1 in - -
Stroke 5 in - -
Displacement 268.5 in³ - -
Biodiesel Capability Up to B20¹ - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time - -
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO - -

Machine Weights

Maximum Operating Weight 54000 lb - -
Minimum Operating Weight 46750 lb - -

Working Ranges

Maximum Reach 30.4 ft - -
Boom MH Boom 5.35 (17'7") - -
Stick Straight 4.3 m (14'1") - -
Maximum Height 35.3 ft - -
Minimum Dump Height 10.8 ft - -
Maximum Reach at Ground Line 28.5 ft - -
Maximum Depth 4.8 ft - -
Boom Pin Height 23.3 ft - -

Transmission

Maximum Gradeability 65 - -
Maximum Travel Speed (with steering wheel) 12.4 mile/h - -
Maximum Travel Speed (with joysticks) 9.3 mile/h - -
Drawbar Pull 28551 lb/ft - -

Hydraulic System

Maximum Flow - Implement/Travel Circuit 81 gal/min - -
Maximum Pressure - Implements 5366 psi - -
Maximum Pressure - Travel 5076 psi - -
Maximum Pressure - Swing 5294 psi - -

Service Refill Capacities

Fuel Tank Capacity 92.5 gal (US) - -
Diesel Exhaust Fluid Tank 7.9 gal (US) - -
Cooling System 9.5 gal (US) - -
Engine Oil 3.4 gal (US) - -
Hydraulic Tank 40.9 gal (US) - -
Hydraulic System - Including Tank 91.1 gal (US) - -
Rear Axle - Housing (Differential) 3.7 gal (US) - -
Front Steering Axle - Differential 2.8 gal (US) - -
Final Drive - Each 0.7 gal (US) - -
Powershift Transmission 0.7 gal (US) - -

Swing Mechanism

Swing Speed 8.2 r/min - -
Maximum Swing Torque 39553 lb/ft - -

Dimensions

Boom MH Boom 5.35 (17'7") - -
Stick Straight 4.3 m (14'1") - -
Shipping Height (with OPG, without stick) 3350 mm - -
Shipping Length 27.3 ft - -
Shipping Length (with push blade) 28.3 ft - -
Machine Length 16.3 ft - -
Machine Length (with push blade) 17.8 ft - -
Tail Swing Radius 8.5 ft - -
Counterweight Clearance 4.3 ft - -
Cab Height- Lowered 11 ft - -
Cab Height-Lowered with OPG 11 ft - -
Cab Height-Raised 18.8 ft - -
Cab Height-Raised with OPG 18.8 ft - -
Wheel Base 8.5 ft - -
Shipping Width 8.3 ft - -
Ground Clearance 1 ft - -
Undercarriage Length 16.1 ft - -
Undercarriage Length (with push blade) 17.6 ft - -
Upper Frame Width (including handrails) 8.3 ft - -

Transmissions

Maximum Travel Speed (with joysticks) 9.3 mile/h - -
Add a Similar Product:
  • MH3040 Material Handler Add
  • MH3026 Wheel Material Handler Add
  • MH3260 Tracked Material Handler Add
  • MH3024 Wheel Material Handler Add
  • MH3250 Tracked Material Handler Add