Compare Equipment Go Back

MH3040 Material Handler
MH3022 Wheel Material Handler

Engine

Engine Model Cat C7.1 Cat C4.4 -
Net Power - ISO 9249 202 HP 145 HP -
Net Power - ISO 9249 (DIN) 205 hp (metric) 147 hp (metric) -
Engine Power - ISO 14396 204 HP - -
Engine Power - ISO 14396 (DIN) 207 hp (metric) 150 hp (metric) -
Bore 4 in 4.1 in -
Stroke 5 in 5 in -
Displacement 428 in³ 268.5 in³ -
Biodiesel Capability Up to B20¹ Up to B20¹ -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. -
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time -
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -
Engine Power - Maximum - ISO 14396 - 148 HP -

Machine Weights

Maximum Operating Weight 86000 lb 54000 lb -
Minimum Operating Weight 81500 lb 46750 lb -

Working Ranges

Maximum Reach 50.8 ft 30.4 ft -
Boom MH 9.3 m (30'6") MH Boom 5.35 (17'7") -
Stick Industrial 7.1 m (23'3") Straight 4.3 m (14'1") -
Maximum Height 57.4 ft 35.3 ft -
Maximum Dump Height 17.8 ft - -
Maximum Depth 17.2 ft 4.8 ft -
Boom Pin Height 40 ft 23.3 ft -
Minimum Dump Height - 10.8 ft -
Maximum Reach at Ground Line - 28.5 ft -

Transmission

Maximum Travel Speed 11.2 mile/h - -
Drawbar Pull 34621 ft·lbf 28551 lb/ft -
Maximum Gradeability 43.8% 65 -
Maximum Travel Speed (with steering wheel) - 12.4 mile/h -
Maximum Travel Speed (with joysticks) - 9.3 mile/h -

Hydraulic System

Maximum Pressure - Implements 5076 psi 5366 psi -
Maximum Pressure - Swing 4061 psi 5294 psi -
Maximum Pressure - Travel 5076 psi 5076 psi -
Maximum Flow - Implement/Travel Circuit - 81 gal/min -

Swing Mechanism

Swing Speed 6 r/min 8.2 r/min -
Maximum Swing Torque 60628 ft-lb 39553 lb/ft -

Service Refill Capacities

Fuel Tank Capacity 125.2 gal (US) 92.5 gal (US) -
Cooling System 6.6 gal (US) 9.5 gal (US) -
Engine Oil 6.6 gal (US) 3.4 gal (US) -
Swing Drive 2.6 gal (US) - -
Rear Axle - Housing (Differential) 5 gal (US) 3.7 gal (US) -
Front Steering Axle - Differential 6.3 gal (US) 2.8 gal (US) -
Final Drive 1.6 gal (US) - -
Powershift Transmission 0.8 gal (US) 0.7 gal (US) -
Hydraulic System - Including Tank 86.9 gal (US) 91.1 gal (US) -
Hydraulic Tank 38.8 gal (US) 40.9 gal (US) -
Diesel Exhaust Fluid (DEF) Tank 10.8 gal (US) - -
Diesel Exhaust Fluid Tank - 7.9 gal (US) -
Final Drive - Each - 0.7 gal (US) -

Dimensions

Boom MH 9.3 m (30'6") MH Boom 5.35 (17'7") -
Stick Industrial 7.1 m (23'3") Straight 4.3 m (14'1") -
Shipping Length 42 ft 27.3 ft -
Machine Length 20.7 ft 16.3 ft -
Tail Swing Radius 10.3 ft 8.5 ft -
Counterweight Clearance 5.7 ft 4.3 ft -
Cab Height- Lowered 12 ft 11 ft -
Cab Height-Lowered with OPG 12.4 ft 11 ft -
Cab Height-Raised 20.5 ft 18.8 ft -
Cab Height-Raised with OPG 21 ft 18.8 ft -
Wheel Base 10.5 ft 8.5 ft -
Shipping Width 9.8 ft 8.3 ft -
Ground Clearance 0.9 ft 1 ft -
Undercarriage Length 20.4 ft 16.1 ft -
Shipping Height (with OPG, without stick) - 3350 mm -
Shipping Length (with push blade) - 28.3 ft -
Machine Length (with push blade) - 17.8 ft -
Undercarriage Length (with push blade) - 17.6 ft -
Upper Frame Width (including handrails) - 8.3 ft -

Air Conditioning System

Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.64 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.892 tons). - -

Sustainability

Recyclability 95% - -

Transmissions

Maximum Travel Speed (with joysticks) - 9.3 mile/h -
Add a Similar Product:
  • MH3026 Wheel Material Handler Add
  • MH3024 Wheel Material Handler Add
  • MH3250 Tracked Material Handler Add
  • MH3260 Tracked Material Handler Add