Compare Equipment Go Back
 M322 |
 M320 Wheeled Excavator |
|
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 174 HP | - |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | - |
| Engine Model | C 7.1 | C4.4 | - |
| Net Power - ISO 9249 | 171 HP | 171 HP | - |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | - |
| Bore | 4.1 in | 4 in | - |
| Displacement | 427.8 in² | 268.5 in³ | - |
| Stroke | 5.3 in | 5.3 in | - |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | - |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | - |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Machine Weight |
|||
| Operating Weight Maximum | 52911 lb | 46740 lb | - |
| Operating Weight Minimum | 44750 lb | 41450 lb | - |
Transmission |
|||
| Forward/Reverse - 2nd Gear | 18.6 mile/h | - | - |
| Forward/Reverse - 1st Gear | 5.6 mile/h | - | - |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | - |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | - |
| Drawbar Pull | 28551 lbf | - | - |
| Maximum Gradeability | 70% | - | - |
| Maximum Travel Speed | - | 21.7 mile/h | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 95 gal/min | 81 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | - |
| Maximum Pressure - Equipment | - | 5366 psi | - |
| Maximum Pressure - Swing | - | 5729 gal/min | - |
| Maximum Pressure - Travel | - | 5076 gal/min | - |
Swing Mechanism |
|||
| Swing Torque | 44250 lb/ft | - | - |
| Swing Speed | - | 9.2 r/min | - |
| Maximum Swing Torque | - | 37000 ft·lbf | - |
Service Refill Capacities |
|||
| Fuel Tank | 124.2 gal (US) | 124.2 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | 7.9 gal (US) | - |
| Cooling System | 10.6 gal (US) | 8.4 gal (US) | - |
| Engine Oil | 3.4 gal (US) | - | - |
| Hydraulic Tank | 52.8 gal (US) | 40.9 gal (US) | - |
| Hydraulic System - Including Tank | 71.3 gal (US) | 71.3 gal (US) | - |
| Final Drive | - | 0.7 gal (US) | - |
Dimensions |
|||
| Boom | VA 5.4m (17'10") | 5260 mm (17'3") | - |
| Stick | 2.9m (9'2") | 2.5 m (8' 2") | - |
| Shipping Height with Falling Object Guard | 11 ft | - | - |
| Support Point | 11.3 ft | 11.8 ft | - |
| Shipping Length | 31.1 ft | 29.3 ft | - |
| Tail Swing Radius | 9.2 ft | 8.5 ft | - |
| Counterweight Clearance | 4.3 ft | 4.3 ft | - |
| Ground Clearance | 1.25 ft | 1.4 ft | - |
| Wheel Base | 9 ft | 8.9 ft | - |
| Bucket | - | 0.98 m³ GD (1.28 yd³) | - |
| Shipping Height - Top of Cab | - | 11 ft | - |
Working Ranges and Forces |
|||
| Boom Type | VA 5.4m (17'10") | VA Boom | - |
| Stick | 2.9m (9'2") | 2.5 m (8' 2") | - |
| Bucket | GD 1.2 m³ (1.7 yd³) | 0.98 m³ GD (1.28 yd³) | - |
| Maximum Loading Height | 24.7 ft | - | - |
| Maximum Digging Depth | 21.8 ft | - | - |
| Reach at Ground Level | 33.4 ft | 30.5 ft | - |
| Vertical Wall Digging Depth | 17.3 ft | 13.9 ft | - |
| Bucket Forces (ISO) | 33946 lbf | 30799 lbf | - |
| Stick Forces (ISO) | 23605 lbf | 20682 lbf | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.6 ft | - | - |
| Cutting Height | - | 32.6 ft | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - |
working Ranges and Forces |
|||
| Cutting Height | 35.8 ft | - | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Add a Similar Product:
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
374 Hydraulic Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add