Compare Equipment Go Back
 M322 |
 M316 Wheeled Excavator |
 M314 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 148 HP | 134 HP |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 150 hp (metric) | 136 hp (metric) |
| Engine Model | C 7.1 | Cat C4.4 | Cat C3.6 |
| Net Power - ISO 9249 | 171 HP | 141 HP | 134 HP |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 143 hp (metric) | 129 hp (metric) |
| Bore | 4.1 in | 4 ft | 3.9 in |
| Displacement | 427.8 in² | 268.5 in³ | 221 in³ |
| Stroke | 5.3 in | - | 5 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 52911 lb | 36400 lb | 39683 lb |
| Operating Weight Minimum | 44750 lb | - | 33069 lb |
| Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
Transmission |
|||
| Forward/Reverse - 2nd Gear | 18.6 mile/h | - | - |
| Forward/Reverse - 1st Gear | 5.6 mile/h | - | - |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | - |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | - |
| Drawbar Pull | 28551 lbf | - | - |
| Maximum Gradeability | 70% | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 95 gal/min | 73 gal/min | 71 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | - |
| Maximum Pressure - Equipment | - | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | - | 5076 psi | 5149 psi |
| Maximum Pressure - Travel | - | 5076 psi | 5076 psi |
Swing Mechanism |
|||
| Swing Torque | 44250 lb/ft | - | - |
| Maximum Swing Torque | - | 32560 ft·lbf | 28860 ft·lbf |
| Swing Speed | - | 10.2 r/min | 9.1 r/min |
Service Refill Capacities |
|||
| Fuel Tank | 124.2 gal (US) | 92.5 gal (US) | 77.9 gal (US) |
| Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | - | 5.3 gal (US) |
| Engine Oil | 3.4 gal (US) | - | - |
| Hydraulic System - Including Tank | 71.3 gal (US) | 68.7 gal (US) | 58.1 gal (US) |
| Cooling System | - | 6.3 gal (US) | 6.3 gal (US) |
| Final Drive | - | 0.7 gal (US) | 0.6 gal (US) |
| Hydraulic Tank | - | 31.7 gal (US) | 23.8 gal (US) |
Dimensions |
|||
| Boom | VA 5.4m (17'10") | 5205 mm (17' 1") | 5m (16' 6") |
| Stick | 2.9m (9'2") | 2.5 m (8' 2") | 2.2m (7' 3") |
| Shipping Height with Falling Object Guard | 11 ft | - | - |
| Support Point | 11.3 ft | 12.7 ft | - |
| Shipping Length | 31.1 ft | 8630 ft | 26.9 ft |
| Tail Swing Radius | 9.2 ft | 7.7 ft | 7.1 ft |
| Counterweight Clearance | 4.3 ft | 4.3 ft | 4.1 ft |
| Ground Clearance | 1.25 ft | 1.3 ft | 1.1 ft |
| Wheel Base | 9 ft | 8.4 ft | 8.2 ft |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | 0.76m3 (.78 yd3) |
| Shipping Height - Top of Cab | - | 10.5 ft | 3315 ft |
| Undercarriage Length | - | 16.3 ft | 16.1 ft |
Working Ranges and Forces |
|||
| Boom Type | VA 5.4m (17'10") | VA Boom | VA Boom |
| Stick | 2.9m (9'2") | R2.5 (8' 2") | R2.2CB (7' 3") |
| Bucket | GD 1.2 m³ (1.7 yd³) | GD 0.8 m3 (1.05 yd3) | 0.76m3 (0.99 y3) GD |
| Maximum Loading Height | 24.7 ft | - | - |
| Maximum Digging Depth | 21.8 ft | - | - |
| Reach at Ground Level | 33.4 ft | 29.4 ft | 28.4 ft |
| Vertical Wall Digging Depth | 17.3 ft | 14.5 mm | 13.9 ft |
| Bucket Forces (ISO) | 33946 lbf | - | - |
| Stick Forces (ISO) | 23605 lbf | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 21.6 ft | - | - |
| Cutting Height | - | 33.2 ft | - |
| Digging Height | - | 18.5 ft | 17.4 ft |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
| Dump Height | - | - | 23 ft |
working Ranges and Forces |
|||
| Cutting Height | 35.8 ft | - | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | 23 mile/h |
Sustainability |
|||
| Recyclability | - | - | 91% |
Add a Similar Product:
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
374 Hydraulic Excavator Add
-
395 Excavator Add
-
352 Hydraulic Excavator Add