CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    M322
    View Product
    352 UHD Ultra High Demolition Hydraulic Excavator
    View Product Remove

    Engine
    Engine Power - ISO 14396 174 HP 425 HP -
    Engine Power - ISO 14396 (DIN) 176 hp (metric) 431 hp (metric) -
    Engine Model C 7.1 Cat C13 -
    Net Power - ISO 9249 171 HP 424 HP -
    Net Power - ISO 9249 (DIN) 174 hp (metric) 430 hp (metric) -
    Bore 4.1 in 5 in -
    Displacement 427.8 in² 763 in³ -
    Stroke 5.3 in 6 in -
    Biodiesel Capability Up to B20¹ Up to B20¹ -
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. -
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time -
    Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -

    Machine Weight
    Operating Weight Maximum 52911 lb - -
    Operating Weight Minimum 44750 lb - -

    Transmission
    Forward/Reverse - 2nd Gear 18.6 mile/h - -
    Forward/Reverse - 1st Gear 5.6 mile/h - -
    Creeper Speed - 1st Gear 3.4 mile/h - -
    Creeper Speed - 2nd Gear 9.3 mile/h - -
    Drawbar Pull 28551 lbf - -
    Maximum Gradeability 70% - -

    Hydraulic System
    Main System - Maximum Flow - Implement 95 gal/min - -
    Maximum Pressure - Implement Circuit - Heavy Lift 5366 psi - -
    Maximum Pressure - Implement Circuit - Travel Circuit 5076 psi - -
    Maximum Pressure - Implement Circuit - Normal 5076 psi - -
    Main System - Maximum Flow - 779 l/min (206 gal/min) -
    Maximum Pressure - Equipment - 5076 psi -
    Maximum Pressure - Equipment - Lift Mode - 5511 psi -
    Maximum Pressure - Travel - 5076 psi -
    Maximum Pressure - Swing - 3771 psi -

    Swing Mechanism
    Swing Torque 44250 lb/ft - -
    Swing Speed - 8.44 r/min -
    Maximum Swing Torque - 139000 ft·lbf -

    Service Refill Capacities
    Fuel Tank 124.2 gal (US) - -
    Diesel Exhaust Fluid (DEF) 7.9 gal (US) - -
    Cooling System 10.6 gal (US) 13.7 gal (US) -
    Engine Oil 3.4 gal (US) 10.6 gal (US) -
    Hydraulic Tank 52.8 gal (US) 57.3 gal (US) -
    Hydraulic System - Including Tank 71.3 gal (US) 145.3 gal (US) -
    Fuel Tank Capacity - 188.9 gal (US) -
    Swing Drive - Each - 2.8 gal (US) -
    Final Drive - Each - 2.5 gal (US) -
    DEF Tank - 12.2 gal (US) -

    Dimensions
    Boom VA 5.4m (17'10") - -
    Stick 2.9m (9'2") - -
    Shipping Height with Falling Object Guard 11 ft - -
    Support Point 11.3 ft - -
    Shipping Length 31.1 ft 61.8 ft -
    Tail Swing Radius 9.2 ft 12.3 ft -
    Counterweight Clearance 4.3 ft 4.7 ft -
    Ground Clearance 1.25 ft 1.7 ft -
    Wheel Base 9 ft - -
    Note (1) - 28 m (91'10") UHD Front -
    Shipping Height - Top of Cab - 11.1 ft -
    Cab Height - With OPG - 11.8 ft -
    Track Length - 18.9 ft -
    Track Length to Center of Rollers - 15.6 ft -
    Working Gauge - Extended Position - 11.2 ft -
    Shipping Gauge - Retracted Position - 7.9 ft -
    Transport Width - 10.7 ft -
    Machine Length - without Front, with Counterweight - 25.5 ft -
    Machine Length - without Front and Counterweight - 24.9 ft -
    Track Width - Extended - 13.1 ft -
    Track Width - Retracted - 9.8 ft -
    Note (2) - 600 mm (24") Track Shoes -

    Working Ranges and Forces
    Boom Type VA 5.4m (17'10") - -
    Stick 2.9m (9'2") - -
    Bucket GD 1.2 m³ (1.7 yd³) - -
    Maximum Loading Height 24.7 ft - -
    Maximum Digging Depth 21.8 ft - -
    Reach at Ground Level 33.4 ft - -
    Vertical Wall Digging Depth 17.3 ft - -
    Bucket Forces (ISO) 33946 lbf - -
    Stick Forces (ISO) 23605 lbf - -
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 21.6 ft - -
    Maximum Pin Height at Stick Nose - 90.8 ft -
    Maximum Weight at Stick Nose - 8157 lb -
    Maximum Working Pin Height at Stick Nose - 1/2 - 75.2 ft -
    Maximum Working Reach at Stick Nose - 1/2 - 45.4 ft -
    Maximum Height at Stick Nose in Max Reach Position - 52.9 ft -
    Maximum Reach at Stick Nose - 51.7 ft -
    Note (1) - 28 m (91' 10") UHD Front Over-the-Front -

    working Ranges and Forces
    Cutting Height 35.8 ft - -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. -

    Weights
    Operating Weight - 143300 lb -
    Note (1) - Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. -
    Machine Weight - Retrofit Configuration - 139300 lb -
    Note (3) - Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. -
    UHD in Cradle - 26000 lb -
    Retrofit Boom in Cradle - R3.9 TB Stick - 16310 lb -
    Retrofit Boom in Cradle - R3.35 TB Stick - 15950 lb -
    Retrofit Boom in Cradle - R2.9 TB Stick - 15760 lb -

    Swing Mechanism - UHD Fronts
    Swing Speed - 4.22 r/min -

    Working Ranges and Forces - Retrofit Boom - Straight
    Note 1 - Straight - R3.35 m (11'0") Stick (Over-the-Front) -
    Bucket - GD 3.08 m³ (4.03 yd³) -
    Maximum Pin Height at Stick Nose - 39.8 ft -
    Maximum Weight at Stick Nose - 13190 lb -
    Maximum Height at Stick Nose in Max Reach Position - 7.7 ft -
    Maximum Reach at Stick Nose - 36.5 ft -
    Maximum Digging Depth - 17 ft -
    Maximum Reach - Ground Level - 41.9 ft -
    Maximum Loading Height - 33.6 ft -
    Minimum Loading Height - 15 ft -
    Bucket Digging Force - ISO - 60250 lbf -
    Stick Digging Force - ISO - 44740 lbf -

    Working Ranges and Forces - Retrofit Boom - Bent
    Note 1 - Bent - R3.35 m (11'0") Stick -
    Bucket - GD 3.08 m³ (4.03 yd³) -
    Maximum Digging Depth - 21.9 ft -
    Maximum Reach - Ground Level - 39 ft -
    Maximum Cutting Height - 35.1 ft -
    Maximum Loading Height - 24.6 ft -
    Minimum Loading Height - 10 ft -
    Bucket Digging Force - ISO - 60250 lbf -
    Stick Digging Force - ISO - 44740 lbf -
    Add a Similar Product:
    • M320 Wheeled Excavator Add
    • M318 Wheeled Excavator Add
    • M319 Wheeled Excavator Add
    • M314 Wheeled Excavator Add
    • M315 Wheeled Excavator Add
    • M316 Wheeled Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • 374 Hydraulic Excavator Add
    • 395 Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add