Compare Equipment Go Back
 M320 Wheeled Excavator |
 M319 Wheeled Excavator |
 374 Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 174 HP | 485 HP |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | 492 hp (metric) |
| Engine Model | C4.4 | C4.4 | Cat C15 |
| Net Power - ISO 9249 | 171 HP | 171 HP | 484 HP |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | 491 hp (metric) |
| Bore | 4 in | 4.1 in | 5.4 in |
| Displacement | 268.5 in³ | 268.5 in³ | 928 in³ |
| Stroke | 5.3 in | 127 mm | 6.7 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 46740 lb | 46407 lb | - |
| Operating Weight Minimum | 41450 lb | 41888 lb | - |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | 21.7 mile/h | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 23380 lbf | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 81 gal/min | 67 gal/min | 237 gal/min |
| Maximum Pressure - Equipment | 5366 psi | - | 5366 psi |
| Maximum Pressure - Swing | 5729 gal/min | - | 5076 psi |
| Maximum Pressure - Travel | 5076 gal/min | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Service Refill Capacities |
|||
| Cooling System | 8.4 gal (US) | 35 l | 19 gal (US) |
| Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | 5.3 gal (US) | - |
| Hydraulic System - Including Tank | 71.3 gal (US) | 74 gal (US) | 164 gal (US) |
| Hydraulic Tank | 40.9 gal (US) | 31.7 gal (US) | 86 gal (US) |
| Final Drive | 0.7 gal (US) | - | - |
| Fuel Tank | 124.2 gal (US) | 76.6 gal (US) | - |
| Fuel Tank Capacity | - | - | 243 gal (US) |
| Engine Oil | - | - | 16 gal (US) |
| Swing Drive | - | - | 5 gal (US) |
| Final Drive - Each | - | - | 9 gal (US) |
| DEF Tank | - | - | 21 gal (US) |
Dimensions |
|||
| Boom | 5260 mm (17'3") | VA 5.2 m (17'1") | Reach 7.8m (25'7") |
| Bucket | 0.98 m³ GD (1.28 yd³) | GD 0.91 m³ (1.19 yd³ ) | SD 3.3 m³ (4.32 yd³) |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | R3.6m (11'10") |
| Shipping Height - Top of Cab | 11 ft | 10.7 ft | 11.8 ft |
| Shipping Length | 29.3 ft | 26.6 ft | 44.9 ft |
| Counterweight Clearance | 4.3 ft | 4.25 ft | 4.1 ft |
| Ground Clearance | 1.4 ft | 1.4 ft | 2.6 ft |
| Support Point | 11.8 ft | 11.6 ft | - |
| Tail Swing Radius | 8.5 ft | 6.25 ft | 13.8 ft |
| Wheel Base | 8.9 ft | 8.8 ft | - |
| Undercarriage Length | - | 16.6 ft | - |
| Handrail Height | - | - | 13 ft |
| Track Length | - | - | 19.3 ft |
| Track Length to Center of Rollers | - | - | 15.5 ft |
| Track Gauge | - | - | 11.2 ft |
| Transport Width | - | - | 11.1 ft |
| Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Working Ranges and Forces |
|||
| Boom Type | VA Boom | VA 5.2 m (17'1") | - |
| Bucket | 0.98 m³ GD (1.28 yd³) | GD 0.91 m³ (1.19 yd³ ) | - |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | - |
| Reach at Ground Level | 30.5 ft | 30.2 ft | - |
| Vertical Wall Digging Depth | 13.9 ft | 14.6 ft | - |
| Cutting Height | 32.6 ft | - | - |
| Bucket Forces (ISO) | 30799 lbf | 26752 lbf | - |
| Stick Forces (ISO) | 20682 lbf | 16861 lbf | - |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
| Dump Height | - | 25.6 ft | - |
| Digging Height | - | 18.9 ft | - |
Swing Mechanism |
|||
| Swing Speed | 9.2 r/min | 9.4 r/min | 6.34 r/min |
| Maximum Swing Torque | 37000 ft·lbf | 32560 ft·lbf | 220000 ft·lbf |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
working Ranges and Forces |
|||
| Cutting Height | - | 35.2 ft | - |
Weights |
|||
| Operating Weight | - | - | 162900 lb |
| Note | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
|||
| Maximum Digging Depth | - | - | 28.1 ft |
| Boom | - | - | Reach 7.8m (25'7") |
| Stick | - | - | R3.6m (11'10") |
| Bucket | - | - | SD 3.3 m³ (4.32 yd³) |
| Maximum Reach at Ground Level | - | - | 43.2 ft |
| Maximum Cutting Height | - | - | 41.2 ft |
| Maximum Loading Height | - | - | 27.7 ft |
| Minimum Loading Height | - | - | 10.1 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 27.8 ft |
| Maximum Vertical Wall Digging Depth | - | - | 22.8 ft |
| Bucket Digging Force - ISO | - | - | 80550 ft·lbf |
| Stick Digging Force - ISO | - | - | 66390 ft·lbf |
Add a Similar Product:
-
M322 Add
-
M318 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M314 Wheeled Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
352 Hydraulic Excavator Add