Compare Equipment Go Back
 M320 Wheeled Excavator |
 M315 Wheeled Excavator |
 352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 148 HP | 425 HP |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 150 hp (metric) | 431 hp (metric) |
| Engine Model | C4.4 | C4.4 | Cat C13 |
| Net Power - ISO 9249 | 171 HP | 145 HP | 424 HP |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 147 hp (metric) | 429.9 hp (metric) |
| Bore | 4 in | 4.1 in | 5 in |
| Displacement | 268.5 in³ | 268.5 in³ | 763 in³ |
| Stroke | 5.3 in | 127 mm | 6 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 46740 lb | 39680 lb | - |
| Operating Weight Minimum | 41450 lb | 34610 lb | - |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | 21.7 mile/h | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 23380 lbf | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 81 gal/min | 73 gal/min | - |
| Maximum Pressure - Equipment | 5366 psi | - | 5076 psi |
| Maximum Pressure - Swing | 5729 gal/min | - | 3771 psi |
| Maximum Pressure - Travel | 5076 gal/min | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Maximum Flow - Main System | - | - | 206 gal/min |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Service Refill Capacities |
|||
| Cooling System | 8.4 gal (US) | 24 l | 13.7 gal (US) |
| Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | 5.3 gal (US) | - |
| Hydraulic System - Including Tank | 71.3 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
| Hydraulic Tank | 40.9 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
| Final Drive | 0.7 gal (US) | - | - |
| Fuel Tank | 124.2 gal (US) | 74 gal (US) | - |
| Fuel Tank Capacity | - | - | 188.9 gal (US) |
| Engine Oil - With Filter | - | - | 10.6 gal (US) |
| Swing Drive | - | - | 2.8 gal (US) |
| Final Drive - Each | - | - | 2.5 gal (US) |
| DEF Tank | - | - | 12.2 gal (US) |
Dimensions |
|||
| Boom | 5260 mm (17'3") | VA 5.2 m (17'1") | LRE Boom 11.5 m (37'9") |
| Bucket | 0.98 m³ GD (1.28 yd³) | GD 0.76 m³ (0.99 yd³ ) | HD 1.19 m³ (1.56 yd³) |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | LRE Stick 8.5 m (27'11') |
| Shipping Height - Top of Cab | 11 ft | 10.9 ft | 11.1 ft |
| Shipping Length | 29.3 ft | 25.1 ft | 54 ft |
| Counterweight Clearance | 4.3 ft | 4.2 ft | 4.7 ft |
| Ground Clearance | 1.4 ft | 1.5 ft | 2.3 ft |
| Support Point | 11.8 ft | 10.1 ft | - |
| Tail Swing Radius | 8.5 ft | 5.9 ft | 12.3 ft |
| Wheel Base | 8.9 ft | 8.4 ft | - |
| Undercarriage Length | - | 16 ft | - |
| Handrail Height | - | - | 11.6 ft |
| Track Length | - | - | 17.6 ft |
| Track Length to Center of Rollers | - | - | 14.2 ft |
| Track Gauge | - | - | 10.6 ft |
| Transport Width | - | - | 13.6 ft |
Working Ranges and Forces |
|||
| Boom Type | VA Boom | VA 5.2 m (17'1") | - |
| Bucket | 0.98 m³ GD (1.28 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | - |
| Reach at Ground Level | 30.5 ft | 29.6 ft | - |
| Vertical Wall Digging Depth | 13.9 ft | 15 ft | - |
| Cutting Height | 32.6 ft | - | - |
| Bucket Forces (ISO) | 30799 lbf | 23830 lbf | - |
| Stick Forces (ISO) | 20682 lbf | 15961 lbf | - |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
| Dump Height | - | 25.2 ft | - |
| Digging Height | - | 18.4 ft | - |
Swing Mechanism |
|||
| Swing Speed | 9.2 r/min | 9.1 r/min | - |
| Maximum Swing Torque | 37000 ft·lbf | 30340 ft·lbf | 138000 ft·lbf |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
working Ranges and Forces |
|||
| Cutting Height | - | 34.2 ft | - |
Weights |
|||
| Operating Weight | - | - | 128800 lb |
| Note | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
|||
| Maximum Digging Depth | - | - | 42.8 ft |
| Boom | - | - | LRE Boom 11.5 m (37'9") |
| Stick | - | - | LRE Stick 8.5 m (27'11') |
| Bucket | - | - | HD 1.19 m³ (1.56 yd³) |
| Maximum Reach at Ground Level | - | - | 64.4 ft |
| Maximum Cutting Height | - | - | 48.2 ft |
| Maximum Loading Height | - | - | 39.4 ft |
| Minimum Loading Height | - | - | 7.3 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 42.5 ft |
| Bucket Digging Force - ISO | - | - | 31700 lbf |
| Stick Digging Force - ISO | - | - | 23380 lbf |
Add a Similar Product:
