Compare Equipment Go Back
M320 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
374 Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Engine Power - ISO 14396 | 174 HP | 425 HP | 485 HP |
Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 431 hp (metric) | 492 hp (metric) |
Engine Model | C4.4 | Cat C13 | Cat C15 |
Net Power - ISO 9249 | 171 HP | 424 HP | 484 HP |
Net Power - ISO 9249 (DIN) | 174 hp (metric) | 429.9 hp (metric) | 491 hp (metric) |
Bore | 4 in | 5 in | 5.4 in |
Displacement | 268.5 in³ | 763 in³ | 928 in³ |
Stroke | 5.3 in | 6 in | 6.7 in |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
Operating Weight Maximum | 46740 lb | - | - |
Operating Weight Minimum | 41450 lb | - | - |
Transmission |
|||
Maximum Travel Speed | 21.7 mile/h | - | - |
Hydraulic System |
|||
Main System - Maximum Flow - Implement | 81 gal/min | - | 237 gal/min |
Maximum Pressure - Equipment | 5366 psi | 5076 psi | 5366 psi |
Maximum Pressure - Swing | 5729 gal/min | 3771 psi | 5076 psi |
Maximum Pressure - Travel | 5076 gal/min | 5076 psi | 5076 psi |
Maximum Flow - Main System | - | 206 gal/min | - |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | 5511 psi |
Service Refill Capacities |
|||
Cooling System | 8.4 gal (US) | 13.7 gal (US) | 19 gal (US) |
Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | - | - |
Hydraulic System - Including Tank | 71.3 gal (US) | 145.3 gal (US) | 164 gal (US) |
Hydraulic Tank | 40.9 gal (US) | 57.3 gal (US) | 86 gal (US) |
Final Drive | 0.7 gal (US) | - | - |
Fuel Tank | 124.2 gal (US) | - | - |
Fuel Tank Capacity | - | 188.9 gal (US) | 243 gal (US) |
Engine Oil - With Filter | - | 10.6 gal (US) | - |
Swing Drive | - | 2.8 gal (US) | 5 gal (US) |
Final Drive - Each | - | 2.5 gal (US) | 9 gal (US) |
DEF Tank | - | 12.2 gal (US) | 21 gal (US) |
Engine Oil | - | - | 16 gal (US) |
Dimensions |
|||
Boom | 5260 mm (17'3") | LRE Boom 11.5 m (37'9") | Reach 7.8m (25'7") |
Bucket | 0.98 m³ GD (1.28 yd³) | HD 1.19 m³ (1.56 yd³) | SD 3.3 m³ (4.32 yd³) |
Stick | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') | R3.6m (11'10") |
Shipping Height - Top of Cab | 11 ft | 11.1 ft | 11.8 ft |
Shipping Length | 29.3 ft | 54 ft | 44.9 ft |
Counterweight Clearance | 4.3 ft | 4.7 ft | 4.1 ft |
Ground Clearance | 1.4 ft | 2.3 ft | 2.6 ft |
Support Point | 11.8 ft | - | - |
Tail Swing Radius | 8.5 ft | 12.3 ft | 13.8 ft |
Wheel Base | 8.9 ft | - | - |
Handrail Height | - | 11.6 ft | 13 ft |
Track Length | - | 17.6 ft | 19.3 ft |
Track Length to Center of Rollers | - | 14.2 ft | 15.5 ft |
Track Gauge | - | 10.6 ft | 11.2 ft |
Transport Width | - | 13.6 ft | 11.1 ft |
Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Working Ranges and Forces |
|||
Boom Type | VA Boom | - | - |
Bucket | 0.98 m³ GD (1.28 yd³) | - | - |
Stick | 2.5 m (8' 2") | - | - |
Reach at Ground Level | 30.5 ft | - | - |
Vertical Wall Digging Depth | 13.9 ft | - | - |
Cutting Height | 32.6 ft | - | - |
Bucket Forces (ISO) | 30799 lbf | - | - |
Stick Forces (ISO) | 20682 lbf | - | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Swing Mechanism |
|||
Swing Speed | 9.2 r/min | - | 6.34 r/min |
Maximum Swing Torque | 37000 ft·lbf | 138000 ft·lbf | 220000 ft·lbf |
Air Conditioning System |
|||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | - |
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Weights |
|||
Operating Weight | - | 128800 lb | 162900 lb |
Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | 42.8 ft | 28.1 ft |
Boom | - | LRE Boom 11.5 m (37'9") | Reach 7.8m (25'7") |
Stick | - | LRE Stick 8.5 m (27'11') | R3.6m (11'10") |
Bucket | - | HD 1.19 m³ (1.56 yd³) | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | - | 64.4 ft | 43.2 ft |
Maximum Cutting Height | - | 48.2 ft | 41.2 ft |
Maximum Loading Height | - | 39.4 ft | 27.7 ft |
Minimum Loading Height | - | 7.3 ft | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | 27.8 ft |
Bucket Digging Force - ISO | - | 31700 lbf | 80550 ft·lbf |
Stick Digging Force - ISO | - | 23380 lbf | 66390 ft·lbf |
Maximum Vertical Wall Digging Depth | - | - | 22.8 ft |
Add a Similar Product: