Compare Equipment Go Back
 M319 Wheeled Excavator |
 M318 Wheeled Excavator |
|
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 174 HP | - |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | - |
| Engine Model | C4.4 | C4.4 | - |
| Net Power - ISO 9249 | 171 HP | 171 HP | - |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | - |
| Bore | 4.1 in | 4 in | - |
| Displacement | 268.5 in³ | 285.5 in³ | - |
| Stroke | 127 mm | 5 in | - |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | - |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | - |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Machine Weight |
|||
| Operating Weight Maximum | 46407 lb | 43980 lb | - |
| Operating Weight Minimum | 41888 lb | 38580 lb | - |
| Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - |
| Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | - | - |
| Forward/Reverse - 1st Gear | 6.2 mile/h | - | - |
| Forward/Reverse - 2nd Gear | 21.7 mile/h | - | - |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | - |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | - |
| Drawbar Pull | 23380 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 67 gal/min | 67 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | - |
| Maximum Pressure - Equipment | - | 5366 psi | - |
| Maximum Pressure - Swing | - | 5149 gal/min | - |
| Maximum Pressure - Travel | - | 5076 gal/min | - |
Swing Mechanism |
|||
| Maximum Swing Torque | 32560 ft·lbf | - | - |
| Swing Speed | 9.4 r/min | 9.4 r/min | - |
| Maximum Swing Speed | - | 32560 ft·lbf | - |
Service Refill Capacities |
|||
| Fuel Tank | 76.6 gal (US) | 92.5 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | 5.3 gal (US) | - |
| Cooling System | 35 l | 8.5 gal (US) | - |
| Hydraulic Tank | 31.7 gal (US) | 31.7 gal (US) | - |
| Hydraulic System - Including Tank | 74 gal (US) | 68.7 gal (US) | - |
| Final Drive | - | 0.7 gal (US) | - |
Dimensions |
|||
| Boom | VA 5.2 m (17'1") | 5205 mm (17'1") | - |
| Stick | 2.5m (8'2") | 2.5 m (8' 2") | - |
| Bucket | GD 0.91 m³ (1.19 yd³ ) | 0.91 m³ GD (1.19 yd³) | - |
| Shipping Height - Top of Cab | 10.7 ft | 11 ft | - |
| Support Point | 11.6 ft | 11.5 ft | - |
| Shipping Length | 26.6 ft | 27.8 ft | - |
| Tail Swing Radius | 6.25 ft | 7.7 ft | - |
| Counterweight Clearance | 4.25 ft | 4.3 ft | - |
| Ground Clearance | 1.4 ft | 1.1 ft | - |
| Undercarriage Length | 16.6 ft | - | - |
| Wheel Base | 8.8 ft | 8.9 ft | - |
Working Ranges and Forces |
|||
| Boom Type | VA 5.2 m (17'1") | VA Boom | - |
| Stick | 2.5m (8'2") | 2.5 m (8' 2") | - |
| Bucket | GD 0.91 m³ (1.19 yd³ ) | 0.91 m³ GD (1.19 yd³) | - |
| Dump Height | 25.6 ft | - | - |
| Digging Height | 18.9 ft | 19.3 ft | - |
| Reach at Ground Level | 30.2 ft | 30.2 ft | - |
| Vertical Wall Digging Depth | 14.6 ft | 15.1 ft | - |
| Stick Forces (ISO) | 16861 lbf | 16861 lbf | - |
| Bucket Forces (ISO) | 26752 lbf | 26752 lbf | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - |
| Cutting Height | - | 33.7 ft | - |
working Ranges and Forces |
|||
| Cutting Height | 35.2 ft | - | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
Service Refill |
|||
| Engine Oil | - | 2.9 gal (US) | - |
Sustainability |
|||
| Recyclability | - | 92% | - |
Add a Similar Product:
-
M320 Wheeled Excavator Add
-
M322 Add
-
M314 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 Hydraulic Excavator Add