Compare Equipment Go Back
 M319 Wheeled Excavator |
 352 LRE Long Reach Excavation Hydraulic Excavator |
 M322 |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 425 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 431 hp (metric) | 176 hp (metric) |
| Engine Model | C4.4 | Cat C13 | C 7.1 |
| Net Power - ISO 9249 | 171 HP | 424 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 429.9 hp (metric) | 174 hp (metric) |
| Bore | 4.1 in | 5 in | 4.1 in |
| Displacement | 268.5 in³ | 763 in³ | 427.8 in² |
| Stroke | 127 mm | 6 in | 5.3 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 46407 lb | - | 52911 lb |
| Operating Weight Minimum | 41888 lb | - | 44750 lb |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | - | - |
| Forward/Reverse - 1st Gear | 6.2 mile/h | - | 5.6 mile/h |
| Forward/Reverse - 2nd Gear | 21.7 mile/h | - | 18.6 mile/h |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | 3.4 mile/h |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | 9.3 mile/h |
| Drawbar Pull | 23380 lbf | - | 28551 lbf |
| Maximum Gradeability | - | - | 70% |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 67 gal/min | - | 95 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | 5366 psi |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | 5076 psi |
| Maximum Flow - Main System | - | 206 gal/min | - |
| Maximum Pressure - Equipment | - | 5076 psi | - |
| Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | - |
| Maximum Pressure - Swing | - | 3771 psi | - |
Swing Mechanism |
|||
| Maximum Swing Torque | 32560 ft·lbf | 138000 ft·lbf | - |
| Swing Speed | 9.4 r/min | - | - |
| Swing Torque | - | - | 44250 lb/ft |
Service Refill Capacities |
|||
| Fuel Tank | 76.6 gal (US) | - | 124.2 gal (US) |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | - | 7.9 gal (US) |
| Cooling System | 35 l | 13.7 gal (US) | 10.6 gal (US) |
| Hydraulic Tank | 31.7 gal (US) | 57.3 gal (US) | 52.8 gal (US) |
| Hydraulic System - Including Tank | 74 gal (US) | 145.3 gal (US) | 71.3 gal (US) |
| Fuel Tank Capacity | - | 188.9 gal (US) | - |
| Engine Oil - With Filter | - | 10.6 gal (US) | - |
| Swing Drive | - | 2.8 gal (US) | - |
| Final Drive - Each | - | 2.5 gal (US) | - |
| DEF Tank | - | 12.2 gal (US) | - |
| Engine Oil | - | - | 3.4 gal (US) |
Dimensions |
|||
| Boom | VA 5.2 m (17'1") | LRE Boom 11.5 m (37'9") | VA 5.4m (17'10") |
| Stick | 2.5m (8'2") | LRE Stick 8.5 m (27'11') | 2.9m (9'2") |
| Bucket | GD 0.91 m³ (1.19 yd³ ) | HD 1.19 m³ (1.56 yd³) | - |
| Shipping Height - Top of Cab | 10.7 ft | 11.1 ft | - |
| Support Point | 11.6 ft | - | 11.3 ft |
| Shipping Length | 26.6 ft | 54 ft | 31.1 ft |
| Tail Swing Radius | 6.25 ft | 12.3 ft | 9.2 ft |
| Counterweight Clearance | 4.25 ft | 4.7 ft | 4.3 ft |
| Ground Clearance | 1.4 ft | 2.3 ft | 1.25 ft |
| Undercarriage Length | 16.6 ft | - | - |
| Wheel Base | 8.8 ft | - | 9 ft |
| Handrail Height | - | 11.6 ft | - |
| Track Length | - | 17.6 ft | - |
| Track Length to Center of Rollers | - | 14.2 ft | - |
| Track Gauge | - | 10.6 ft | - |
| Transport Width | - | 13.6 ft | - |
| Shipping Height with Falling Object Guard | - | - | 11 ft |
Working Ranges and Forces |
|||
| Boom Type | VA 5.2 m (17'1") | - | VA 5.4m (17'10") |
| Stick | 2.5m (8'2") | - | 2.9m (9'2") |
| Bucket | GD 0.91 m³ (1.19 yd³ ) | - | GD 1.2 m³ (1.7 yd³) |
| Dump Height | 25.6 ft | - | - |
| Digging Height | 18.9 ft | - | - |
| Reach at Ground Level | 30.2 ft | - | 33.4 ft |
| Vertical Wall Digging Depth | 14.6 ft | - | 17.3 ft |
| Stick Forces (ISO) | 16861 lbf | - | 23605 lbf |
| Bucket Forces (ISO) | 26752 lbf | - | 33946 lbf |
| Maximum Loading Height | - | - | 24.7 ft |
| Maximum Digging Depth | - | - | 21.8 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 21.6 ft |
working Ranges and Forces |
|||
| Cutting Height | 35.2 ft | - | 35.8 ft |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
| Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Weights |
|||
| Operating Weight | - | 128800 lb | - |
| Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | - | 42.8 ft | - |
| Boom | - | LRE Boom 11.5 m (37'9") | - |
| Stick | - | LRE Stick 8.5 m (27'11') | - |
| Bucket | - | HD 1.19 m³ (1.56 yd³) | - |
| Maximum Reach at Ground Level | - | 64.4 ft | - |
| Maximum Cutting Height | - | 48.2 ft | - |
| Maximum Loading Height | - | 39.4 ft | - |
| Minimum Loading Height | - | 7.3 ft | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - |
| Bucket Digging Force - ISO | - | 31700 lbf | - |
| Stick Digging Force - ISO | - | 23380 lbf | - |
Add a Similar Product:
-
M318 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
374 Hydraulic Excavator Add
-
352 Hydraulic Excavator Add