CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    M319 Wheeled Excavator
    View Product
    395 Excavator
    View Product Remove

    Engine
    Engine Power - ISO 14396 174 HP 543 HP -
    Engine Power - ISO 14396 (DIN) 176 hp (metric) 551 hp (metric) -
    Engine Model C4.4 Cat C18 -
    Net Power - ISO 9249 171 HP 542 HP -
    Net Power - ISO 9249 (DIN) 174 hp (metric) 550 hp (metric) -
    Bore 4.1 in 6 in -
    Displacement 268.5 in³ 1105 in³ -
    Stroke 127 mm 7 in -
    Biodiesel Capability Up to B20¹ B20¹ -
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. -
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m -
    Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -

    Machine Weight
    Operating Weight Maximum 46407 lb - -
    Operating Weight Minimum 41888 lb - -

    Transmission
    Maximum Travel Speed 21.7 mile/h - -
    Forward/Reverse - 1st Gear 6.2 mile/h - -
    Forward/Reverse - 2nd Gear 21.7 mile/h - -
    Creeper Speed - 1st Gear 3.4 mile/h - -
    Creeper Speed - 2nd Gear 9.3 mile/h - -
    Drawbar Pull 23380 lbf - -

    Hydraulic System
    Main System - Maximum Flow - Implement 67 gal/min 281 gal/min -
    Maximum Pressure - Implement Circuit - Heavy Lift 5366 psi - -
    Maximum Pressure - Implement Circuit - Travel Circuit 5076 psi - -
    Maximum Pressure - Implement Circuit - Normal 5076 psi - -
    Maximum Pressure - Equipment - 5366 psi -
    Maximum Pressure - Travel - 5076 psi -
    Maximum Pressure - Swing - 4496 psi -

    Swing Mechanism
    Maximum Swing Torque 32560 ft·lbf 267333 ft·lbf -
    Swing Speed 9.4 r/min 6.26 r/min -

    Service Refill Capacities
    Fuel Tank 76.6 gal (US) - -
    Diesel Exhaust Fluid (DEF) 5.3 gal (US) - -
    Cooling System 35 l 19 gal (US) -
    Hydraulic Tank 31.7 gal (US) 98 gal (US) -
    Hydraulic System - Including Tank 74 gal (US) 196 gal (US) -
    Fuel Tank Capacity - 322 gal (US) -
    Engine Oil - 18 gal (US) -
    Swing Drive - 6 gal (US) -
    Final Drive - Each - 5 gal (US) -
    DEF Tank - 21 gal (US) -

    Dimensions
    Boom VA 5.2 m (17'1") GP 8.4m (25'7") -
    Stick 2.5m (8'2") R4.4m (14'5") -
    Bucket GD 0.91 m³ (1.19 yd³ ) SD 5.2m³ (6.8 yd³) -
    Shipping Height - Top of Cab 10.7 ft 12 ft -
    Support Point 11.6 ft - -
    Shipping Length 26.6 ft 49.6 ft -
    Tail Swing Radius 6.25 ft 15.11 ft -
    Counterweight Clearance 4.25 ft 5.5 ft -
    Ground Clearance 1.4 ft 2.9 ft -
    Undercarriage Length 16.6 ft - -
    Wheel Base 8.8 ft - -
    Handrail Height - 12.4 ft -
    Track Length - 20.1 ft -
    Track Length to Center of Rollers - 16.1 ft -
    Track Gauge - 11.6 ft -
    Transport Width - 12.9 ft -
    Note - Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps -

    Working Ranges and Forces
    Boom Type VA 5.2 m (17'1") - -
    Stick 2.5m (8'2") - -
    Bucket GD 0.91 m³ (1.19 yd³ ) - -
    Dump Height 25.6 ft - -
    Digging Height 18.9 ft - -
    Reach at Ground Level 30.2 ft - -
    Vertical Wall Digging Depth 14.6 ft - -
    Stick Forces (ISO) 16861 lbf - -
    Bucket Forces (ISO) 26752 lbf - -

    working Ranges and Forces
    Cutting Height 35.2 ft - -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). -

    Weights
    Operating Weight - 207400 lb -
    Note (1) - Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. -

    Working Ranges & Forces
    Maximum Digging Depth - 31.9 ft -
    Boom - GP 8.4m (25'7") -
    Stick - R4.4m (14'5") -
    Bucket - SD 5.2m³ (6.8 yd³) -
    Maximum Reach at Ground Level - 48.3 ft -
    Maximum Cutting Height - 44.5 ft -
    Maximum Loading Height - 30.4 ft -
    Minimum Loading Height - 9.11 ft -
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 31.4 ft -
    Maximum Vertical Wall Digging Depth - 22.3 ft -
    Bucket Digging Force - ISO - 86100 ft·lbf -
    Stick Digging Force - ISO - 68540 ft·lbf -

    Sustainability
    Recyclability - 98% -
    Add a Similar Product:
    • M322 Add
    • M320 Wheeled Excavator Add
    • M316 Wheeled Excavator Add
    • M318 Wheeled Excavator Add
    • M314 Wheeled Excavator Add
    • M315 Wheeled Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • 352 UHD Ultra High Demolition Hydraulic Excavator Add
    • 374 Hydraulic Excavator Add