Compare Equipment Go Back
M319 Wheeled Excavator |
M322 |
374 Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Engine Power - ISO 14396 | 174 HP | 174 HP | 485 HP |
Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | 492 hp (metric) |
Engine Model | C4.4 | C 7.1 | Cat C15 |
Net Power - ISO 9249 | 171 HP | 171 HP | 484 HP |
Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | 491 hp (metric) |
Bore | 4.1 in | 4.1 in | 5.4 in |
Displacement | 268.5 in³ | 427.8 in² | 928 in³ |
Stroke | 127 mm | 5.3 in | 6.7 in |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
Operating Weight Maximum | 46407 lb | 52911 lb | - |
Operating Weight Minimum | 41888 lb | 44750 lb | - |
Transmission |
|||
Maximum Travel Speed | 21.7 mile/h | - | - |
Forward/Reverse - 1st Gear | 6.2 mile/h | 5.6 mile/h | - |
Forward/Reverse - 2nd Gear | 21.7 mile/h | 18.6 mile/h | - |
Creeper Speed - 1st Gear | 3.4 mile/h | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | 9.3 mile/h | 9.3 mile/h | - |
Drawbar Pull | 23380 lbf | 28551 lbf | - |
Maximum Gradeability | - | 70% | - |
Hydraulic System |
|||
Main System - Maximum Flow - Implement | 67 gal/min | 95 gal/min | 237 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | 5076 psi | 5076 psi | - |
Maximum Pressure - Equipment | - | - | 5366 psi |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Maximum Pressure - Travel | - | - | 5076 psi |
Maximum Pressure - Swing | - | - | 5076 psi |
Swing Mechanism |
|||
Maximum Swing Torque | 32560 ft·lbf | - | 220000 ft·lbf |
Swing Speed | 9.4 r/min | - | 6.34 r/min |
Swing Torque | - | 44250 lb/ft | - |
Service Refill Capacities |
|||
Fuel Tank | 76.6 gal (US) | 124.2 gal (US) | - |
Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | 7.9 gal (US) | - |
Cooling System | 35 l | 10.6 gal (US) | 19 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 52.8 gal (US) | 86 gal (US) |
Hydraulic System - Including Tank | 74 gal (US) | 71.3 gal (US) | 164 gal (US) |
Engine Oil | - | 3.4 gal (US) | 16 gal (US) |
Fuel Tank Capacity | - | - | 243 gal (US) |
Swing Drive | - | - | 5 gal (US) |
Final Drive - Each | - | - | 9 gal (US) |
DEF Tank | - | - | 21 gal (US) |
Dimensions |
|||
Boom | VA 5.2 m (17'1") | VA 5.4m (17'10") | Reach 7.8m (25'7") |
Stick | 2.5m (8'2") | 2.9m (9'2") | R3.6m (11'10") |
Bucket | GD 0.91 m³ (1.19 yd³ ) | - | SD 3.3 m³ (4.32 yd³) |
Shipping Height - Top of Cab | 10.7 ft | - | 11.8 ft |
Support Point | 11.6 ft | 11.3 ft | - |
Shipping Length | 26.6 ft | 31.1 ft | 44.9 ft |
Tail Swing Radius | 6.25 ft | 9.2 ft | 13.8 ft |
Counterweight Clearance | 4.25 ft | 4.3 ft | 4.1 ft |
Ground Clearance | 1.4 ft | 1.25 ft | 2.6 ft |
Undercarriage Length | 16.6 ft | - | - |
Wheel Base | 8.8 ft | 9 ft | - |
Shipping Height with Falling Object Guard | - | 11 ft | - |
Handrail Height | - | - | 13 ft |
Track Length | - | - | 19.3 ft |
Track Length to Center of Rollers | - | - | 15.5 ft |
Track Gauge | - | - | 11.2 ft |
Transport Width | - | - | 11.1 ft |
Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Working Ranges and Forces |
|||
Boom Type | VA 5.2 m (17'1") | VA 5.4m (17'10") | - |
Stick | 2.5m (8'2") | 2.9m (9'2") | - |
Bucket | GD 0.91 m³ (1.19 yd³ ) | GD 1.2 m³ (1.7 yd³) | - |
Dump Height | 25.6 ft | - | - |
Digging Height | 18.9 ft | - | - |
Reach at Ground Level | 30.2 ft | 33.4 ft | - |
Vertical Wall Digging Depth | 14.6 ft | 17.3 ft | - |
Stick Forces (ISO) | 16861 lbf | 23605 lbf | - |
Bucket Forces (ISO) | 26752 lbf | 33946 lbf | - |
Maximum Loading Height | - | 24.7 ft | - |
Maximum Digging Depth | - | 21.8 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - |
working Ranges and Forces |
|||
Cutting Height | 35.2 ft | 35.8 ft | - |
Air Conditioning System |
|||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Weights |
|||
Operating Weight | - | - | 162900 lb |
Note | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | - | 28.1 ft |
Boom | - | - | Reach 7.8m (25'7") |
Stick | - | - | R3.6m (11'10") |
Bucket | - | - | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | - | - | 43.2 ft |
Maximum Cutting Height | - | - | 41.2 ft |
Maximum Loading Height | - | - | 27.7 ft |
Minimum Loading Height | - | - | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 27.8 ft |
Maximum Vertical Wall Digging Depth | - | - | 22.8 ft |
Bucket Digging Force - ISO | - | - | 80550 ft·lbf |
Stick Digging Force - ISO | - | - | 66390 ft·lbf |
Add a Similar Product:
- M320 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- M314 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add
- 352 Hydraulic Excavator Add