Compare Equipment Go Back
 M318 Wheeled Excavator |
 M315 Wheeled Excavator |
 M314 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 HP | 148 HP | 134 HP |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 150 hp (metric) | 136 hp (metric) |
| Engine Model | C4.4 | C4.4 | Cat C3.6 |
| Net Power - ISO 9249 | 171 HP | 145 HP | 134 HP |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 147 hp (metric) | 129 hp (metric) |
| Bore | 4 in | 4.1 in | 3.9 in |
| Displacement | 285.5 in³ | 268.5 in³ | 221 in³ |
| Stroke | 5 in | 127 mm | 5 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 43980 lb | 39680 lb | 39683 lb |
| Operating Weight Minimum | 38580 lb | 34610 lb | 33069 lb |
| Note (1) | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
| Note (2) | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - |
Drive |
|||
| Maximum Travel Speed | 21.7 mile/h | - | 23 mile/h |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 67 gal/min | 73 gal/min | 71 gal/min |
| Maximum Pressure - Equipment | 5366 psi | - | 5076 psi |
| Maximum Pressure - Swing | 5149 gal/min | - | 5149 psi |
| Maximum Pressure - Travel | 5076 gal/min | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
Service Refill Capacities |
|||
| Cooling System | 8.5 gal (US) | 24 l | 6.3 gal (US) |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | 5.3 gal (US) | 5.3 gal (US) |
| Hydraulic System - Including Tank | 68.7 gal (US) | 58.1 gal (US) | 58.1 gal (US) |
| Hydraulic Tank | 31.7 gal (US) | 23.8 gal (US) | 23.8 gal (US) |
| Final Drive | 0.7 gal (US) | - | 0.6 gal (US) |
| Fuel Tank | 92.5 gal (US) | 74 gal (US) | 77.9 gal (US) |
Dimensions |
|||
| Boom | 5205 mm (17'1") | VA 5.2 m (17'1") | 5m (16' 6") |
| Bucket | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | 0.76m3 (.78 yd3) |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | 2.2m (7' 3") |
| Shipping Height - Top of Cab | 11 ft | 10.9 ft | 3315 ft |
| Shipping Length | 27.8 ft | 25.1 ft | 26.9 ft |
| Counterweight Clearance | 4.3 ft | 4.2 ft | 4.1 ft |
| Ground Clearance | 1.1 ft | 1.5 ft | 1.1 ft |
| Support Point | 11.5 ft | 10.1 ft | - |
| Tail Swing Radius | 7.7 ft | 5.9 ft | 7.1 ft |
| Wheel Base | 8.9 ft | 8.4 ft | 8.2 ft |
| Undercarriage Length | - | 16 ft | 16.1 ft |
Working Ranges and Forces |
|||
| Boom Type | VA Boom | VA 5.2 m (17'1") | VA Boom |
| Bucket | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | 0.76m3 (0.99 y3) GD |
| Digging Height | 19.3 ft | 18.4 ft | 17.4 ft |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | R2.2CB (7' 3") |
| Reach at Ground Level | 30.2 ft | 29.6 ft | 28.4 ft |
| Vertical Wall Digging Depth | 15.1 ft | 15 ft | 13.9 ft |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
| Bucket Forces (ISO) | 26752 lbf | 23830 lbf | - |
| Stick Forces (ISO) | 16861 lbf | 15961 lbf | - |
| Cutting Height | 33.7 ft | - | - |
| Dump Height | - | 25.2 ft | 23 ft |
Swing Mechanism |
|||
| Maximum Swing Speed | 32560 ft·lbf | - | - |
| Swing Speed | 9.4 r/min | 9.1 r/min | 9.1 r/min |
| Maximum Swing Torque | - | 30340 ft·lbf | 28860 ft·lbf |
Service Refill |
|||
| Engine Oil | 2.9 gal (US) | - | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
|||
| Recyclability | 92% | - | 91% |
Transmission |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 23380 lbf | - |
working Ranges and Forces |
|||
| Cutting Height | - | 34.2 ft | - |
Add a Similar Product:
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M322 Add
-
M316 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
374 Hydraulic Excavator Add
-
395 Excavator Add
-
352 Hydraulic Excavator Add