CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    M316 Wheeled Excavator
    View Product
    M322
    View Product Remove
    352 UHD Ultra High Demolition Hydraulic Excavator
    View Product Remove

    Engine
    Engine Power - ISO 14396 148 HP 174 HP 425 HP
    Engine Power - ISO 14396 (DIN) 150 hp (metric) 176 hp (metric) 431 hp (metric)
    Engine Model Cat C4.4 C 7.1 Cat C13
    Net Power - ISO 9249 141 HP 171 HP 424 HP
    Net Power - ISO 9249 (DIN) 143 hp (metric) 174 hp (metric) 430 hp (metric)
    Bore 4 ft 4.1 in 5 in
    Displacement 268.5 in³ 427.8 in² 763 in³
    Biodiesel Capability Up to B20¹ Up to B20¹ Up to B20¹
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time
    Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
    Stroke - 5.3 in 6 in

    Machine Weight
    Operating Weight Maximum 36400 lb 52911 lb -
    Note (1) Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. - -
    Operating Weight Minimum - 44750 lb -

    Drive
    Maximum Travel Speed 21.7 mile/h - -

    Hydraulic System
    Main System - Maximum Flow - Implement 73 gal/min 95 gal/min -
    Maximum Pressure - Equipment 5076 psi - 5076 psi
    Maximum Pressure - Swing 5076 psi - 3771 psi
    Maximum Pressure - Travel 5076 psi - 5076 psi
    Maximum Pressure - Implement Circuit - Heavy Lift - 5366 psi -
    Maximum Pressure - Implement Circuit - Travel Circuit - 5076 psi -
    Maximum Pressure - Implement Circuit - Normal - 5076 psi -
    Main System - Maximum Flow - - 779 l/min (206 gal/min)
    Maximum Pressure - Equipment - Lift Mode - - 5511 psi

    Swing Mechanism
    Maximum Swing Torque 32560 ft·lbf - 139000 ft·lbf
    Swing Speed 10.2 r/min - 8.44 r/min
    Swing Torque - 44250 lb/ft -

    Service Refill Capacities
    Cooling System 6.3 gal (US) 10.6 gal (US) 13.7 gal (US)
    Final Drive 0.7 gal (US) - -
    Fuel Tank 92.5 gal (US) 124.2 gal (US) -
    Hydraulic System - Including Tank 68.7 gal (US) 71.3 gal (US) 145.3 gal (US)
    Hydraulic Tank 31.7 gal (US) 52.8 gal (US) 57.3 gal (US)
    Diesel Exhaust Fluid (DEF) - 7.9 gal (US) -
    Engine Oil - 3.4 gal (US) 10.6 gal (US)
    Fuel Tank Capacity - - 188.9 gal (US)
    Swing Drive - Each - - 2.8 gal (US)
    Final Drive - Each - - 2.5 gal (US)
    DEF Tank - - 12.2 gal (US)

    Dimensions
    Boom 5205 mm (17' 1") VA 5.4m (17'10") -
    Bucket GD 0.8 m3 (1.05 yd3) - -
    Stick 2.5 m (8' 2") 2.9m (9'2") -
    Counterweight Clearance 4.3 ft 4.3 ft 4.7 ft
    Ground Clearance 1.3 ft 1.25 ft 1.7 ft
    Shipping Height - Top of Cab 10.5 ft - 11.1 ft
    Shipping Length 8630 ft 31.1 ft 61.8 ft
    Support Point 12.7 ft 11.3 ft -
    Tail Swing Radius 7.7 ft 9.2 ft 12.3 ft
    Undercarriage Length 16.3 ft - -
    Wheel Base 8.4 ft 9 ft -
    Shipping Height with Falling Object Guard - 11 ft -
    Note (1) - - 28 m (91'10") UHD Front
    Cab Height - With OPG - - 11.8 ft
    Track Length - - 18.9 ft
    Track Length to Center of Rollers - - 15.6 ft
    Working Gauge - Extended Position - - 11.2 ft
    Shipping Gauge - Retracted Position - - 7.9 ft
    Transport Width - - 10.7 ft
    Machine Length - without Front, with Counterweight - - 25.5 ft
    Machine Length - without Front and Counterweight - - 24.9 ft
    Track Width - Extended - - 13.1 ft
    Track Width - Retracted - - 9.8 ft
    Note (2) - - 600 mm (24") Track Shoes

    Working Ranges and Forces
    Boom Type VA Boom VA 5.4m (17'10") -
    Bucket GD 0.8 m3 (1.05 yd3) GD 1.2 m³ (1.7 yd³) -
    Stick R2.5 (8' 2") 2.9m (9'2") -
    Cutting Height 33.2 ft - -
    Reach at Ground Level 29.4 ft 33.4 ft -
    Vertical Wall Digging Depth 14.5 mm 17.3 ft -
    Digging Height 18.5 ft - -
    Note (1) Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). - 28 m (91' 10") UHD Front Over-the-Front
    Maximum Loading Height - 24.7 ft -
    Maximum Digging Depth - 21.8 ft -
    Bucket Forces (ISO) - 33946 lbf -
    Stick Forces (ISO) - 23605 lbf -
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 21.6 ft -
    Maximum Pin Height at Stick Nose - - 90.8 ft
    Maximum Weight at Stick Nose - - 8157 lb
    Maximum Working Pin Height at Stick Nose - 1/2 - - 75.2 ft
    Maximum Working Reach at Stick Nose - 1/2 - - 45.4 ft
    Maximum Height at Stick Nose in Max Reach Position - - 52.9 ft
    Maximum Reach at Stick Nose - - 51.7 ft

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

    Transmission
    Forward/Reverse - 2nd Gear - 18.6 mile/h -
    Forward/Reverse - 1st Gear - 5.6 mile/h -
    Creeper Speed - 1st Gear - 3.4 mile/h -
    Creeper Speed - 2nd Gear - 9.3 mile/h -
    Drawbar Pull - 28551 lbf -
    Maximum Gradeability - 70% -

    working Ranges and Forces
    Cutting Height - 35.8 ft -

    Weights
    Operating Weight - - 143300 lb
    Note (1) - - Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool.
    Machine Weight - Retrofit Configuration - - 139300 lb
    Note (3) - - Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight.
    UHD in Cradle - - 26000 lb
    Retrofit Boom in Cradle - R3.9 TB Stick - - 16310 lb
    Retrofit Boom in Cradle - R3.35 TB Stick - - 15950 lb
    Retrofit Boom in Cradle - R2.9 TB Stick - - 15760 lb

    Swing Mechanism - UHD Fronts
    Swing Speed - - 4.22 r/min

    Working Ranges and Forces - Retrofit Boom - Straight
    Note 1 - - Straight - R3.35 m (11'0") Stick (Over-the-Front)
    Bucket - - GD 3.08 m³ (4.03 yd³)
    Maximum Pin Height at Stick Nose - - 39.8 ft
    Maximum Weight at Stick Nose - - 13190 lb
    Maximum Height at Stick Nose in Max Reach Position - - 7.7 ft
    Maximum Reach at Stick Nose - - 36.5 ft
    Maximum Digging Depth - - 17 ft
    Maximum Reach - Ground Level - - 41.9 ft
    Maximum Loading Height - - 33.6 ft
    Minimum Loading Height - - 15 ft
    Bucket Digging Force - ISO - - 60250 lbf
    Stick Digging Force - ISO - - 44740 lbf

    Working Ranges and Forces - Retrofit Boom - Bent
    Note 1 - - Bent - R3.35 m (11'0") Stick
    Bucket - - GD 3.08 m³ (4.03 yd³)
    Maximum Digging Depth - - 21.9 ft
    Maximum Reach - Ground Level - - 39 ft
    Maximum Cutting Height - - 35.1 ft
    Maximum Loading Height - - 24.6 ft
    Minimum Loading Height - - 10 ft
    Bucket Digging Force - ISO - - 60250 lbf
    Stick Digging Force - ISO - - 44740 lbf
    Add a Similar Product:
    • M318 Wheeled Excavator Add
    • M319 Wheeled Excavator Add
    • M320 Wheeled Excavator Add
    • M315 Wheeled Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • M314 Wheeled Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add
    • 395 Excavator Add
    • 374 Hydraulic Excavator Add
    • 340 Hydraulic Excavator Add