Compare Equipment Go Back
M316 Wheeled Excavator |
M320 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
M322 |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 148 HP | 174 HP | 425 HP | 174 HP |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 176 hp (metric) | 431 hp (metric) | 176 hp (metric) |
Engine Model | Cat C4.4 | C4.4 | Cat C13 | C 7.1 |
Net Power - ISO 9249 | 141 HP | 171 HP | 424 HP | 171 HP |
Net Power - ISO 9249 (DIN) | 143 hp (metric) | 174 hp (metric) | 429.9 hp (metric) | 174 hp (metric) |
Bore | 4 ft | 4 in | 5 in | 4.1 in |
Displacement | 268.5 in³ | 268.5 in³ | 763 in³ | 427.8 in² |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Stroke | - | 5.3 in | 6 in | 5.3 in |
Machine Weight |
||||
Operating Weight Maximum | 36400 lb | 46740 lb | - | 52911 lb |
Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - | - |
Operating Weight Minimum | - | 41450 lb | - | 44750 lb |
Drive |
||||
Maximum Travel Speed | 21.7 mile/h | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 73 gal/min | 81 gal/min | - | 95 gal/min |
Maximum Pressure - Equipment | 5076 psi | 5366 psi | 5076 psi | - |
Maximum Pressure - Swing | 5076 psi | 5729 gal/min | 3771 psi | - |
Maximum Pressure - Travel | 5076 psi | 5076 gal/min | 5076 psi | - |
Maximum Flow - Main System | - | - | 206 gal/min | - |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Maximum Swing Torque | 32560 ft·lbf | 37000 ft·lbf | 138000 ft·lbf | - |
Swing Speed | 10.2 r/min | 9.2 r/min | - | - |
Swing Torque | - | - | - | 44250 lb/ft |
Service Refill Capacities |
||||
Cooling System | 6.3 gal (US) | 8.4 gal (US) | 13.7 gal (US) | 10.6 gal (US) |
Final Drive | 0.7 gal (US) | 0.7 gal (US) | - | - |
Fuel Tank | 92.5 gal (US) | 124.2 gal (US) | - | 124.2 gal (US) |
Hydraulic System - Including Tank | 68.7 gal (US) | 71.3 gal (US) | 145.3 gal (US) | 71.3 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 40.9 gal (US) | 57.3 gal (US) | 52.8 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | 7.9 gal (US) |
Fuel Tank Capacity | - | - | 188.9 gal (US) | - |
Engine Oil - With Filter | - | - | 10.6 gal (US) | - |
Swing Drive | - | - | 2.8 gal (US) | - |
Final Drive - Each | - | - | 2.5 gal (US) | - |
DEF Tank | - | - | 12.2 gal (US) | - |
Engine Oil | - | - | - | 3.4 gal (US) |
Dimensions |
||||
Boom | 5205 mm (17' 1") | 5260 mm (17'3") | LRE Boom 11.5 m (37'9") | VA 5.4m (17'10") |
Bucket | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | HD 1.19 m³ (1.56 yd³) | - |
Stick | 2.5 m (8' 2") | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') | 2.9m (9'2") |
Counterweight Clearance | 4.3 ft | 4.3 ft | 4.7 ft | 4.3 ft |
Ground Clearance | 1.3 ft | 1.4 ft | 2.3 ft | 1.25 ft |
Shipping Height - Top of Cab | 10.5 ft | 11 ft | 11.1 ft | - |
Shipping Length | 8630 ft | 29.3 ft | 54 ft | 31.1 ft |
Support Point | 12.7 ft | 11.8 ft | - | 11.3 ft |
Tail Swing Radius | 7.7 ft | 8.5 ft | 12.3 ft | 9.2 ft |
Undercarriage Length | 16.3 ft | - | - | - |
Wheel Base | 8.4 ft | 8.9 ft | - | 9 ft |
Handrail Height | - | - | 11.6 ft | - |
Track Length | - | - | 17.6 ft | - |
Track Length to Center of Rollers | - | - | 14.2 ft | - |
Track Gauge | - | - | 10.6 ft | - |
Transport Width | - | - | 13.6 ft | - |
Shipping Height with Falling Object Guard | - | - | - | 11 ft |
Working Ranges and Forces |
||||
Boom Type | VA Boom | VA Boom | - | VA 5.4m (17'10") |
Bucket | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | - | GD 1.2 m³ (1.7 yd³) |
Stick | R2.5 (8' 2") | 2.5 m (8' 2") | - | 2.9m (9'2") |
Cutting Height | 33.2 ft | 32.6 ft | - | - |
Reach at Ground Level | 29.4 ft | 30.5 ft | - | 33.4 ft |
Vertical Wall Digging Depth | 14.5 mm | 13.9 ft | - | 17.3 ft |
Digging Height | 18.5 ft | - | - | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Bucket Forces (ISO) | - | 30799 lbf | - | 33946 lbf |
Stick Forces (ISO) | - | 20682 lbf | - | 23605 lbf |
Maximum Loading Height | - | - | - | 24.7 ft |
Maximum Digging Depth | - | - | - | 21.8 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 21.6 ft |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 2nd Gear | - | - | - | 18.6 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 5.6 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 28551 lbf |
Maximum Gradeability | - | - | - | 70% |
Weights |
||||
Operating Weight | - | - | 128800 lb | - |
Note | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | - | 42.8 ft | - |
Boom | - | - | LRE Boom 11.5 m (37'9") | - |
Stick | - | - | LRE Stick 8.5 m (27'11') | - |
Bucket | - | - | HD 1.19 m³ (1.56 yd³) | - |
Maximum Reach at Ground Level | - | - | 64.4 ft | - |
Maximum Cutting Height | - | - | 48.2 ft | - |
Maximum Loading Height | - | - | 39.4 ft | - |
Minimum Loading Height | - | - | 7.3 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 42.5 ft | - |
Bucket Digging Force - ISO | - | - | 31700 lbf | - |
Stick Digging Force - ISO | - | - | 23380 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.8 ft |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- 336 Hydraulic Excavator Add