Compare Equipment Go Back
M316 Wheeled Excavator |
M320 Wheeled Excavator |
395 Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 148 HP | 174 HP | 543 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 176 hp (metric) | 551 hp (metric) | 431 hp (metric) |
Engine Model | Cat C4.4 | C4.4 | Cat C18 | Cat C13 |
Net Power - ISO 9249 | 141 HP | 171 HP | 542 HP | 424 HP |
Net Power - ISO 9249 (DIN) | 143 hp (metric) | 174 hp (metric) | 550 hp (metric) | 429.9 hp (metric) |
Bore | 4 ft | 4 in | 6 in | 5 in |
Displacement | 268.5 in³ | 268.5 in³ | 1105 in³ | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Stroke | - | 5.3 in | 7 in | 6 in |
Machine Weight |
||||
Operating Weight Maximum | 36400 lb | 46740 lb | - | - |
Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - | - |
Operating Weight Minimum | - | 41450 lb | - | - |
Drive |
||||
Maximum Travel Speed | 21.7 mile/h | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 73 gal/min | 81 gal/min | 281 gal/min | - |
Maximum Pressure - Equipment | 5076 psi | 5366 psi | 5366 psi | 5076 psi |
Maximum Pressure - Swing | 5076 psi | 5729 gal/min | 4496 psi | 3771 psi |
Maximum Pressure - Travel | 5076 psi | 5076 gal/min | 5076 psi | 5076 psi |
Maximum Flow - Main System | - | - | - | 206 gal/min |
Maximum Pressure - Equipment - Lift Mode | - | - | - | 5511 psi |
Swing Mechanism |
||||
Maximum Swing Torque | 32560 ft·lbf | 37000 ft·lbf | 267333 ft·lbf | 138000 ft·lbf |
Swing Speed | 10.2 r/min | 9.2 r/min | 6.26 r/min | - |
Service Refill Capacities |
||||
Cooling System | 6.3 gal (US) | 8.4 gal (US) | 19 gal (US) | 13.7 gal (US) |
Final Drive | 0.7 gal (US) | 0.7 gal (US) | - | - |
Fuel Tank | 92.5 gal (US) | 124.2 gal (US) | - | - |
Hydraulic System - Including Tank | 68.7 gal (US) | 71.3 gal (US) | 196 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 40.9 gal (US) | 98 gal (US) | 57.3 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | - |
Fuel Tank Capacity | - | - | 322 gal (US) | 188.9 gal (US) |
Engine Oil | - | - | 18 gal (US) | - |
Swing Drive | - | - | 6 gal (US) | 2.8 gal (US) |
Final Drive - Each | - | - | 5 gal (US) | 2.5 gal (US) |
DEF Tank | - | - | 21 gal (US) | 12.2 gal (US) |
Engine Oil - With Filter | - | - | - | 10.6 gal (US) |
Dimensions |
||||
Boom | 5205 mm (17' 1") | 5260 mm (17'3") | GP 8.4m (25'7") | LRE Boom 11.5 m (37'9") |
Bucket | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | SD 5.2m³ (6.8 yd³) | HD 1.19 m³ (1.56 yd³) |
Stick | 2.5 m (8' 2") | 2.5 m (8' 2") | R4.4m (14'5") | LRE Stick 8.5 m (27'11') |
Counterweight Clearance | 4.3 ft | 4.3 ft | 5.5 ft | 4.7 ft |
Ground Clearance | 1.3 ft | 1.4 ft | 2.9 ft | 2.3 ft |
Shipping Height - Top of Cab | 10.5 ft | 11 ft | 12 ft | 11.1 ft |
Shipping Length | 8630 ft | 29.3 ft | 49.6 ft | 54 ft |
Support Point | 12.7 ft | 11.8 ft | - | - |
Tail Swing Radius | 7.7 ft | 8.5 ft | 15.11 ft | 12.3 ft |
Undercarriage Length | 16.3 ft | - | - | - |
Wheel Base | 8.4 ft | 8.9 ft | - | - |
Handrail Height | - | - | 12.4 ft | 11.6 ft |
Track Length | - | - | 20.1 ft | 17.6 ft |
Track Length to Center of Rollers | - | - | 16.1 ft | 14.2 ft |
Track Gauge | - | - | 11.6 ft | 10.6 ft |
Transport Width | - | - | 12.9 ft | 13.6 ft |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - |
Working Ranges and Forces |
||||
Boom Type | VA Boom | VA Boom | - | - |
Bucket | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | - | - |
Stick | R2.5 (8' 2") | 2.5 m (8' 2") | - | - |
Cutting Height | 33.2 ft | 32.6 ft | - | - |
Reach at Ground Level | 29.4 ft | 30.5 ft | - | - |
Vertical Wall Digging Depth | 14.5 mm | 13.9 ft | - | - |
Digging Height | 18.5 ft | - | - | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Bucket Forces (ISO) | - | 30799 lbf | - | - |
Stick Forces (ISO) | - | 20682 lbf | - | - |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | - |
Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Weights |
||||
Operating Weight | - | - | 207400 lb | 128800 lb |
Note (1) | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - |
Note | - | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | - | 31.9 ft | 42.8 ft |
Boom | - | - | GP 8.4m (25'7") | LRE Boom 11.5 m (37'9") |
Stick | - | - | R4.4m (14'5") | LRE Stick 8.5 m (27'11') |
Bucket | - | - | SD 5.2m³ (6.8 yd³) | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | - | - | 48.3 ft | 64.4 ft |
Maximum Cutting Height | - | - | 44.5 ft | 48.2 ft |
Maximum Loading Height | - | - | 30.4 ft | 39.4 ft |
Minimum Loading Height | - | - | 9.11 ft | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 31.4 ft | 42.5 ft |
Maximum Vertical Wall Digging Depth | - | - | 22.3 ft | - |
Bucket Digging Force - ISO | - | - | 86100 ft·lbf | 31700 lbf |
Stick Digging Force - ISO | - | - | 68540 ft·lbf | 23380 lbf |
Sustainability |
||||
Recyclability | - | - | 98% | - |
Add a Similar Product:
- M322 Add
- M319 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add