Compare Equipment Go Back
 M316 Wheeled Excavator |
 M315 Wheeled Excavator |
 352 Hydraulic Excavator |
 M322 |
|
Engine |
||||
|---|---|---|---|---|
| Engine Power - ISO 14396 | 148 HP | 148 HP | 445 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 150 hp (metric) | 451 hp (metric) | 176 hp (metric) |
| Engine Model | Cat C4.4 | C4.4 | Cat C13B | C 7.1 |
| Net Power - ISO 9249 | 141 HP | 145 HP | 443 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 143 hp (metric) | 147 hp (metric) | 449 hp (metric) | 174 hp (metric) |
| Bore | 4 ft | 4.1 in | 5 in | 4.1 in |
| Displacement | 268.5 in³ | 268.5 in³ | 763 in³ | 427.8 in² |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
| Stroke | - | 127 mm | 6 in | 5.3 in |
Machine Weight |
||||
| Operating Weight Maximum | 36400 lb | 39680 lb | - | 52911 lb |
| Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - | - |
| Operating Weight Minimum | - | 34610 lb | - | 44750 lb |
Drive |
||||
| Maximum Travel Speed | 21.7 mile/h | - | - | - |
Hydraulic System |
||||
| Main System - Maximum Flow - Implement | 73 gal/min | 73 gal/min | - | 95 gal/min |
| Maximum Pressure - Equipment | 5076 psi | - | 5076 psi | - |
| Maximum Pressure - Swing | 5076 psi | - | 3771 psi | - |
| Maximum Pressure - Travel | 5076 psi | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - | 5366 psi |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - | 5076 psi |
| Main System - Maximum Flow | - | - | 779 l/min (206 gal/min) | - |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi | - |
Swing Mechanism |
||||
| Maximum Swing Torque | 32560 ft·lbf | 30340 ft·lbf | 139000 ft·lbf | - |
| Swing Speed | 10.2 r/min | 9.1 r/min | 8.3 r/min | - |
| Swing Torque | - | - | - | 44250 lb/ft |
Service Refill Capacities |
||||
| Cooling System | 6.3 gal (US) | 24 l | 13.7 gal (US) | 10.6 gal (US) |
| Final Drive | 0.7 gal (US) | - | - | - |
| Fuel Tank | 92.5 gal (US) | 74 gal (US) | - | 124.2 gal (US) |
| Hydraulic System - Including Tank | 68.7 gal (US) | 58.1 gal (US) | 145.3 gal (US) | 71.3 gal (US) |
| Hydraulic Tank | 31.7 gal (US) | 23.8 gal (US) | 57.3 gal (US) | 52.8 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - | 7.9 gal (US) |
| Fuel Tank Capacity | - | - | 188.9 gal (US) | - |
| Engine Oil | - | - | 10.6 gal (US) | 3.4 gal (US) |
| Swing Drive | - | - | 2.8 gal (US) | - |
| Final Drive - Each | - | - | 2.5 gal (US) | - |
| DEF Tank | - | - | 21.1 gal (US) | - |
Dimensions |
||||
| Boom | 5205 mm (17' 1") | VA 5.2 m (17'1") | Reach 6.9 m (22'8") | VA 5.4m (17'10") |
| Bucket | GD 0.8 m3 (1.05 yd3) | GD 0.76 m³ (0.99 yd³ ) | HD 3.3 m³ (4.32 yd³) | - |
| Stick | 2.5 m (8' 2") | 2.5m (8'2") | Reach 3.9 m (12'10") | 2.9m (9'2") |
| Counterweight Clearance | 4.3 ft | 4.2 ft | 4.2 ft | 4.3 ft |
| Ground Clearance | 1.3 ft | 1.5 ft | 1.7 ft | 1.25 ft |
| Shipping Height - Top of Cab | 10.5 ft | 10.9 ft | 10.7 ft | - |
| Shipping Length | 8630 ft | 25.1 ft | 39.1 ft | 31.1 ft |
| Support Point | 12.7 ft | 10.1 ft | - | 11.3 ft |
| Tail Swing Radius | 7.7 ft | 5.9 ft | 12.4 ft | 9.2 ft |
| Undercarriage Length | 16.3 ft | 16 ft | - | - |
| Wheel Base | 8.4 ft | 8.4 ft | - | 9 ft |
| Handrail Height | - | - | 11.1 ft | - |
| Track Length | - | - | 17.7 ft | - |
| Track Length to Center of Rollers | - | - | 14.4 ft | - |
| Track Gauge | - | - | 9 ft | - |
| Transport Width | - | - | 11.11 ft | - |
| Shipping Height with Falling Object Guard | - | - | - | 11 ft |
Working Ranges and Forces |
||||
| Boom Type | VA Boom | VA 5.2 m (17'1") | - | VA 5.4m (17'10") |
| Bucket | GD 0.8 m3 (1.05 yd3) | GD 0.76 m³ (0.99 yd³ ) | - | GD 1.2 m³ (1.7 yd³) |
| Stick | R2.5 (8' 2") | 2.5m (8'2") | - | 2.9m (9'2") |
| Cutting Height | 33.2 ft | - | - | - |
| Reach at Ground Level | 29.4 ft | 29.6 ft | - | 33.4 ft |
| Vertical Wall Digging Depth | 14.5 mm | 15 ft | - | 17.3 ft |
| Digging Height | 18.5 ft | 18.4 ft | - | - |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - | - | - |
| Dump Height | - | 25.2 ft | - | - |
| Stick Forces (ISO) | - | 15961 lbf | - | 23605 lbf |
| Bucket Forces (ISO) | - | 23830 lbf | - | 33946 lbf |
| Maximum Loading Height | - | - | - | 24.7 ft |
| Maximum Digging Depth | - | - | - | 21.8 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 21.6 ft |
Air Conditioning System |
||||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. | - |
Transmission |
||||
| Maximum Travel Speed | - | 21.7 mile/h | - | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - | 5.6 mile/h |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - | 18.6 mile/h |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - | 3.4 mile/h |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - | 9.3 mile/h |
| Drawbar Pull | - | 23380 lbf | - | 28551 lbf |
| Maximum Gradeability | - | - | - | 70% |
working Ranges and Forces |
||||
| Cutting Height | - | 34.2 ft | - | 35.8 ft |
Weights |
||||
| Operating Weight | - | - | 107800 lb | - |
Working Ranges & Forces |
||||
| Maximum Digging Depth | - | - | 26.11 ft | - |
| Boom | - | - | Reach 6.9 m (22'8") | - |
| Stick | - | - | Reach 3.9 m (12'10") | - |
| Bucket | - | - | HD 3.3 m³ (4.32 yd³) | - |
| Maximum Reach at Ground Level | - | - | 39.9 ft | - |
| Maximum Cutting Height | - | - | 35.2 ft | - |
| Maximum Loading Height | - | - | 24.4 ft | - |
| Minimum Loading Height | - | - | 7.3 ft | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 26.6 ft | - |
| Maximum Vertical Wall Digging Depth | - | - | 19.3 ft | - |
| Bucket Digging Force - ISO | - | - | 60000 lbf | - |
| Stick Digging Force - ISO | - | - | 41100 lbf | - |
Add a Similar Product:
-
M320 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
374 Hydraulic Excavator Add
-
Cat® 340 Hydraulic Excavator Add