Compare Equipment Go Back
M316 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
M315 Wheeled Excavator |
395 Excavator |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 148 HP | 425 HP | 148 HP | 543 HP |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 431 hp (metric) | 150 hp (metric) | 551 hp (metric) |
Engine Model | Cat C4.4 | Cat C13 | C4.4 | Cat C18 |
Net Power - ISO 9249 | 141 HP | 424 HP | 145 HP | 542 HP |
Net Power - ISO 9249 (DIN) | 143 hp (metric) | 429.9 hp (metric) | 147 hp (metric) | 550 hp (metric) |
Bore | 4 ft | 5 in | 4.1 in | 6 in |
Displacement | 268.5 in³ | 763 in³ | 268.5 in³ | 1105 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Stroke | - | 6 in | 127 mm | 7 in |
Machine Weight |
||||
Operating Weight Maximum | 36400 lb | - | 39680 lb | - |
Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - | - |
Operating Weight Minimum | - | - | 34610 lb | - |
Drive |
||||
Maximum Travel Speed | 21.7 mile/h | - | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 73 gal/min | - | 73 gal/min | 281 gal/min |
Maximum Pressure - Equipment | 5076 psi | 5076 psi | - | 5366 psi |
Maximum Pressure - Swing | 5076 psi | 3771 psi | - | 4496 psi |
Maximum Pressure - Travel | 5076 psi | 5076 psi | - | 5076 psi |
Maximum Flow - Main System | - | 206 gal/min | - | - |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Swing Mechanism |
||||
Maximum Swing Torque | 32560 ft·lbf | 138000 ft·lbf | 30340 ft·lbf | 267333 ft·lbf |
Swing Speed | 10.2 r/min | - | 9.1 r/min | 6.26 r/min |
Service Refill Capacities |
||||
Cooling System | 6.3 gal (US) | 13.7 gal (US) | 24 l | 19 gal (US) |
Final Drive | 0.7 gal (US) | - | - | - |
Fuel Tank | 92.5 gal (US) | - | 74 gal (US) | - |
Hydraulic System - Including Tank | 68.7 gal (US) | 145.3 gal (US) | 58.1 gal (US) | 196 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 57.3 gal (US) | 23.8 gal (US) | 98 gal (US) |
Fuel Tank Capacity | - | 188.9 gal (US) | - | 322 gal (US) |
Engine Oil - With Filter | - | 10.6 gal (US) | - | - |
Swing Drive | - | 2.8 gal (US) | - | 6 gal (US) |
Final Drive - Each | - | 2.5 gal (US) | - | 5 gal (US) |
DEF Tank | - | 12.2 gal (US) | - | 21 gal (US) |
Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) | - |
Engine Oil | - | - | - | 18 gal (US) |
Dimensions |
||||
Boom | 5205 mm (17' 1") | LRE Boom 11.5 m (37'9") | VA 5.2 m (17'1") | GP 8.4m (25'7") |
Bucket | GD 0.8 m3 (1.05 yd3) | HD 1.19 m³ (1.56 yd³) | GD 0.76 m³ (0.99 yd³ ) | SD 5.2m³ (6.8 yd³) |
Stick | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') | 2.5m (8'2") | R4.4m (14'5") |
Counterweight Clearance | 4.3 ft | 4.7 ft | 4.2 ft | 5.5 ft |
Ground Clearance | 1.3 ft | 2.3 ft | 1.5 ft | 2.9 ft |
Shipping Height - Top of Cab | 10.5 ft | 11.1 ft | 10.9 ft | 12 ft |
Shipping Length | 8630 ft | 54 ft | 25.1 ft | 49.6 ft |
Support Point | 12.7 ft | - | 10.1 ft | - |
Tail Swing Radius | 7.7 ft | 12.3 ft | 5.9 ft | 15.11 ft |
Undercarriage Length | 16.3 ft | - | 16 ft | - |
Wheel Base | 8.4 ft | - | 8.4 ft | - |
Handrail Height | - | 11.6 ft | - | 12.4 ft |
Track Length | - | 17.6 ft | - | 20.1 ft |
Track Length to Center of Rollers | - | 14.2 ft | - | 16.1 ft |
Track Gauge | - | 10.6 ft | - | 11.6 ft |
Transport Width | - | 13.6 ft | - | 12.9 ft |
Note | - | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Working Ranges and Forces |
||||
Boom Type | VA Boom | - | VA 5.2 m (17'1") | - |
Bucket | GD 0.8 m3 (1.05 yd3) | - | GD 0.76 m³ (0.99 yd³ ) | - |
Stick | R2.5 (8' 2") | - | 2.5m (8'2") | - |
Cutting Height | 33.2 ft | - | - | - |
Reach at Ground Level | 29.4 ft | - | 29.6 ft | - |
Vertical Wall Digging Depth | 14.5 mm | - | 15 ft | - |
Digging Height | 18.5 ft | - | 18.4 ft | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - | - | - |
Dump Height | - | - | 25.2 ft | - |
Stick Forces (ISO) | - | - | 15961 lbf | - |
Bucket Forces (ISO) | - | - | 23830 lbf | - |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Weights |
||||
Operating Weight | - | 128800 lb | - | 207400 lb |
Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - | - |
Note (1) | - | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | 42.8 ft | - | 31.9 ft |
Boom | - | LRE Boom 11.5 m (37'9") | - | GP 8.4m (25'7") |
Stick | - | LRE Stick 8.5 m (27'11') | - | R4.4m (14'5") |
Bucket | - | HD 1.19 m³ (1.56 yd³) | - | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | - | 64.4 ft | - | 48.3 ft |
Maximum Cutting Height | - | 48.2 ft | - | 44.5 ft |
Maximum Loading Height | - | 39.4 ft | - | 30.4 ft |
Minimum Loading Height | - | 7.3 ft | - | 9.11 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - | 31.4 ft |
Bucket Digging Force - ISO | - | 31700 lbf | - | 86100 ft·lbf |
Stick Digging Force - ISO | - | 23380 lbf | - | 68540 ft·lbf |
Maximum Vertical Wall Digging Depth | - | - | - | 22.3 ft |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 34.2 ft | - |
Sustainability |
||||
Recyclability | - | - | - | 98% |
Add a Similar Product:
- M322 Add
- M319 Wheeled Excavator Add
- M320 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add