Compare Equipment Go Back
M316 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
M314 Wheeled Excavator |
352 Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 148 HP | 425 HP | 134 HP | 445 HP |
Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 431 hp (metric) | 136 hp (metric) | 451 hp (metric) |
Engine Model | Cat C4.4 | Cat C13 | Cat C3.6 | Cat C13B |
Net Power - ISO 9249 | 141 HP | 424 HP | 134 HP | 443 HP |
Net Power - ISO 9249 (DIN) | 143 hp (metric) | 429.9 hp (metric) | 129 hp (metric) | 449 hp (metric) |
Bore | 4 ft | 5 in | 3.9 in | 5 in |
Displacement | 268.5 in³ | 763 in³ | 221 in³ | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Stroke | - | 6 in | 5 in | 6 in |
Machine Weight |
||||
Operating Weight Maximum | 36400 lb | - | 39683 lb | - |
Note (1) | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - |
Operating Weight Minimum | - | - | 33069 lb | - |
Drive |
||||
Maximum Travel Speed | 21.7 mile/h | - | 23 mile/h | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 73 gal/min | - | 71 gal/min | - |
Maximum Pressure - Equipment | 5076 psi | 5076 psi | 5076 psi | 5076 psi |
Maximum Pressure - Swing | 5076 psi | 3771 psi | 5149 psi | 3771 psi |
Maximum Pressure - Travel | 5076 psi | 5076 psi | 5076 psi | 5076 psi |
Maximum Flow - Main System | - | 206 gal/min | - | - |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - | 5511 psi |
Main System - Maximum Flow | - | - | - | 779 l/min (206 gal/min) |
Swing Mechanism |
||||
Maximum Swing Torque | 32560 ft·lbf | 138000 ft·lbf | 28860 ft·lbf | 139000 ft·lbf |
Swing Speed | 10.2 r/min | - | 9.1 r/min | 8.3 r/min |
Service Refill Capacities |
||||
Cooling System | 6.3 gal (US) | 13.7 gal (US) | 6.3 gal (US) | 13.7 gal (US) |
Final Drive | 0.7 gal (US) | - | 0.6 gal (US) | - |
Fuel Tank | 92.5 gal (US) | - | 77.9 gal (US) | - |
Hydraulic System - Including Tank | 68.7 gal (US) | 145.3 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 31.7 gal (US) | 57.3 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
Fuel Tank Capacity | - | 188.9 gal (US) | - | 188.9 gal (US) |
Engine Oil - With Filter | - | 10.6 gal (US) | - | - |
Swing Drive | - | 2.8 gal (US) | - | 2.8 gal (US) |
Final Drive - Each | - | 2.5 gal (US) | - | 2.5 gal (US) |
DEF Tank | - | 12.2 gal (US) | - | 21.1 gal (US) |
Diesel Exhaust Fluid (DEF) | - | - | 5.3 gal (US) | - |
Engine Oil | - | - | - | 10.6 gal (US) |
Dimensions |
||||
Boom | 5205 mm (17' 1") | LRE Boom 11.5 m (37'9") | 5m (16' 6") | Reach 6.9 m (22'8") |
Bucket | GD 0.8 m3 (1.05 yd3) | HD 1.19 m³ (1.56 yd³) | 0.76m3 (.78 yd3) | HD 3.3 m³ (4.32 yd³) |
Stick | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') | 2.2m (7' 3") | Reach 3.9 m (12'10") |
Counterweight Clearance | 4.3 ft | 4.7 ft | 4.1 ft | 4.2 ft |
Ground Clearance | 1.3 ft | 2.3 ft | 1.1 ft | 1.7 ft |
Shipping Height - Top of Cab | 10.5 ft | 11.1 ft | 3315 ft | 10.7 ft |
Shipping Length | 8630 ft | 54 ft | 26.9 ft | 39.1 ft |
Support Point | 12.7 ft | - | - | - |
Tail Swing Radius | 7.7 ft | 12.3 ft | 7.1 ft | 12.4 ft |
Undercarriage Length | 16.3 ft | - | 16.1 ft | - |
Wheel Base | 8.4 ft | - | 8.2 ft | - |
Handrail Height | - | 11.6 ft | - | 11.1 ft |
Track Length | - | 17.6 ft | - | 17.7 ft |
Track Length to Center of Rollers | - | 14.2 ft | - | 14.4 ft |
Track Gauge | - | 10.6 ft | - | 9 ft |
Transport Width | - | 13.6 ft | - | 11.11 ft |
Working Ranges and Forces |
||||
Boom Type | VA Boom | - | VA Boom | - |
Bucket | GD 0.8 m3 (1.05 yd3) | - | 0.76m3 (0.99 y3) GD | - |
Stick | R2.5 (8' 2") | - | R2.2CB (7' 3") | - |
Cutting Height | 33.2 ft | - | - | - |
Reach at Ground Level | 29.4 ft | - | 28.4 ft | - |
Vertical Wall Digging Depth | 14.5 mm | - | 13.9 ft | - |
Digging Height | 18.5 ft | - | 17.4 ft | - |
Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | - |
Dump Height | - | - | 23 ft | - |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. |
Weights |
||||
Operating Weight | - | 128800 lb | - | 107800 lb |
Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | - | 42.8 ft | - | 26.11 ft |
Boom | - | LRE Boom 11.5 m (37'9") | - | Reach 6.9 m (22'8") |
Stick | - | LRE Stick 8.5 m (27'11') | - | Reach 3.9 m (12'10") |
Bucket | - | HD 1.19 m³ (1.56 yd³) | - | HD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | - | 64.4 ft | - | 39.9 ft |
Maximum Cutting Height | - | 48.2 ft | - | 35.2 ft |
Maximum Loading Height | - | 39.4 ft | - | 24.4 ft |
Minimum Loading Height | - | 7.3 ft | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - | 26.6 ft |
Bucket Digging Force - ISO | - | 31700 lbf | - | 60000 lbf |
Stick Digging Force - ISO | - | 23380 lbf | - | 41100 lbf |
Maximum Vertical Wall Digging Depth | - | - | - | 19.3 ft |
Sustainability |
||||
Recyclability | - | - | 91% | - |
Add a Similar Product:
- M322 Add
- M320 Wheeled Excavator Add
- M319 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add
- 374 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add