CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    M315 Wheeled Excavator
    View Product
    M322
    View Product Remove
    340 UHD Ultra High Demolition Hydraulic Excavator
    View Product Remove

    Engine
    Engine Power - ISO 14396 148 HP 174 HP 347 HP
    Engine Power - ISO 14396 (DIN) 150 hp (metric) 176 hp (metric) 351 hp (metric)
    Engine Model C4.4 C 7.1 Cat C9.3B
    Net Power - ISO 9249 145 HP 171 HP 346 HP
    Net Power - ISO 9249 (DIN) 147 hp (metric) 174 hp (metric) 352 hp (metric)
    Bore 4.1 in 4.1 in 5 in
    Displacement 268.5 in³ 427.8 in² 568 in³
    Stroke 127 mm 5.3 in 6 in
    Biodiesel Capability Up to B20¹ Up to B20¹ Up to B20¹
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time
    Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

    Machine Weight
    Operating Weight Maximum 39680 lb 52911 lb -
    Operating Weight Minimum 34610 lb 44750 lb -

    Transmission
    Maximum Travel Speed 21.7 mile/h - -
    Forward/Reverse - 1st Gear 6.2 mile/h 5.6 mile/h -
    Forward/Reverse - 2nd Gear 21.7 mile/h 18.6 mile/h -
    Creeper Speed - 1st Gear 3.4 mile/h 3.4 mile/h -
    Creeper Speed - 2nd Gear 9.3 mile/h 9.3 mile/h -
    Drawbar Pull 23380 lbf 28551 lbf -
    Maximum Gradeability - 70% -

    Hydraulic System
    Main System - Maximum Flow - Implement 73 gal/min 95 gal/min -
    Maximum Pressure - Implement Circuit - Heavy Lift 5366 psi 5366 psi -
    Maximum Pressure - Implement Circuit - Travel Circuit 5076 psi 5076 psi -
    Maximum Pressure - Implement Circuit - Normal 5076 psi 5076 psi -
    Main System - Maximum Flow - - 560 l/min (148 gal/min)
    Maximum Pressure - Equipment - - 5076 psi
    Maximum Pressure - Equipment - Lift Mode - - 5511 psi
    Maximum Pressure - Travel - - 5076 psi
    Maximum Pressure - Swing - - 4264 psi

    Swing Mechanism
    Maximum Swing Torque 30340 ft·lbf - 105000 ft·lbf
    Swing Speed 9.1 r/min - 8 r/min
    Swing Torque - 44250 lb/ft -

    Service Refill Capacities
    Fuel Tank 74 gal (US) 124.2 gal (US) -
    Diesel Exhaust Fluid (DEF) 5.3 gal (US) 7.9 gal (US) -
    Cooling System 24 l 10.6 gal (US) 11 gal (US)
    Hydraulic Tank 23.8 gal (US) 52.8 gal (US) 43 gal (US)
    Hydraulic System - Including Tank 58.1 gal (US) 71.3 gal (US) 145 gal (US)
    Engine Oil - 3.4 gal (US) 9 gal (US)
    Fuel Tank Capacity - - 159 gal (US)
    Swing Drive - - 5 gal (US)
    Final Drive - Each - - 2 gal (US)
    DEF Tank - - 21 gal (US)

    Dimensions
    Boom VA 5.2 m (17'1") VA 5.4m (17'10") -
    Stick 2.5m (8'2") 2.9m (9'2") -
    Bucket GD 0.76 m³ (0.99 yd³ ) - -
    Shipping Height - Top of Cab 10.9 ft - 11.1 ft
    Support Point 10.1 ft 11.3 ft -
    Shipping Length 25.1 ft 31.1 ft 49.9 ft
    Tail Swing Radius 5.9 ft 9.2 ft 11.6 ft
    Counterweight Clearance 4.2 ft 4.3 ft 4.6 ft
    Ground Clearance 1.5 ft 1.25 ft 1.7 ft
    Undercarriage Length 16 ft - -
    Wheel Base 8.4 ft 9 ft -
    Shipping Height with Falling Object Guard - 11 ft -
    Note (1) - - 22 m (72'2") UHD Front
    Cab Height - With OPG - - 11.8 ft
    Track Length - - 18.9 ft
    Track Length to Center of Rollers - - 15.6 ft
    Working Gauge - Extended Position - - 11.1 ft
    Shipping Gauge - Retracted Position - - 7.8 ft
    Transport Width - - 10.7 ft
    Machine Length - without Front, with Counterweight - - 23.3 ft
    Machine Length - without Front and Counterweight - - 22.9 ft
    Track Width - Extended - - 13.1 ft
    Track Width - Retracted - - 9.8 ft
    Note (2) - - 600 mm (24") Track Shoes

    Working Ranges and Forces
    Boom Type VA 5.2 m (17'1") VA 5.4m (17'10") -
    Stick 2.5m (8'2") 2.9m (9'2") -
    Bucket GD 0.76 m³ (0.99 yd³ ) GD 1.2 m³ (1.7 yd³) -
    Dump Height 25.2 ft - -
    Digging Height 18.4 ft - -
    Reach at Ground Level 29.6 ft 33.4 ft -
    Vertical Wall Digging Depth 15 ft 17.3 ft -
    Stick Forces (ISO) 15961 lbf 23605 lbf -
    Bucket Forces (ISO) 23830 lbf 33946 lbf -
    Maximum Loading Height - 24.7 ft -
    Maximum Digging Depth - 21.8 ft -
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 21.6 ft -
    Maximum Pin Height at Stick Nose - - 72.2 ft
    Maximum Weight at Stick Nose - - 8160 lb
    Maximum Working Pin Height at Stick Nose - 1/2 - - 61 ft
    Maximum Working Reach at Stick Nose - 1/2 - - 38.4 ft
    Maximum Height at Stick Nose in Max Reach Position - - 41.5 ft
    Maximum Reach at Stick Nose - - 44.4 ft
    Note (1) - - 22 m (72' 2") UHD Front (Over-the-Front)

    working Ranges and Forces
    Cutting Height 34.2 ft 35.8 ft -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

    Weights
    Operating Weight - - 122600 lb
    Note (1) - - Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool.
    Machine Weight - Retrofit Configuration - - 118600 lb
    Note (2) - - Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight.
    UHD in Cradle - - 18700 lb
    Retrofit Boom in Cradle - R3.9 DB Stick - - 13710 lb
    Retrofit Boom in Cradle - R3.2 DB Stick - - 13340 lb
    Retrofit Boom in Cradle - R2.8 DB Stick - - 13120 lb
    2-piece Retrofit boom in cradle - R3.2 DB stick - - 17440 lb

    Swing Mechanism - UHD Fronts
    Swing Speed - - 4.09 r/min

    Working Ranges and Forces - Retrofit Boom - Straight
    Note 1 - - Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage
    Bucket - - GD 2.27 m³ (2.97 yd³)
    Maximum Pin Height at Stick Nose - - 39.8 ft
    Maximum Weight at Stick Nose - - 9260 lb
    Maximum Height at Stick Nose in Max Reach Position - - 7.6 ft
    Maximum Reach at Stick Nose - - 34.8 ft
    Maximum Digging Depth - - 16.1 ft
    Maximum Reach - Ground Level - - 39.9 ft
    Maximum Loading Height - - 34 ft
    Minimum Loading Height - - 15.7 ft
    Bucket Digging Force - ISO - - 47160 lbf
    Stick Digging Force - ISO - - 37300 lbf

    Working Ranges and Forces - Retrofit Boom - Bent
    Note 1 - - Bent - R3.2DB (10'6") Stick - HVG Undercarriage
    Bucket - - GD 2.27 m³ (2.97 yd³)
    Maximum Digging Depth - - 21.4 ft
    Maximum Reach - Ground Level - - 36.7 ft
    Maximum Cutting Height - - 35.4 ft
    Maximum Loading Height - - 24.9 ft
    Minimum Loading Height - - 10.4 ft
    Bucket Digging Force - ISO - - 47160 lbf
    Stick Digging Force - ISO - - 37300 lbf
    Add a Similar Product:
    • M320 Wheeled Excavator Add
    • M316 Wheeled Excavator Add
    • M318 Wheeled Excavator Add
    • M319 Wheeled Excavator Add
    • M314 Wheeled Excavator Add
    • 352 UHD Ultra High Demolition Hydraulic Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • 395 Excavator Add
    • 352 Hydraulic Excavator Add
    • 374 Hydraulic Excavator Add