Compare Equipment Go Back
 M315 Wheeled Excavator |
 M314 Wheeled Excavator |
 352 Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 148 HP | 134 HP | 445 HP |
| Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 136 hp (metric) | 451 hp (metric) |
| Engine Model | C4.4 | Cat C3.6 | Cat C13B |
| Net Power - ISO 9249 | 145 HP | 134 HP | 443 HP |
| Net Power - ISO 9249 (DIN) | 147 hp (metric) | 129 hp (metric) | 449 hp (metric) |
| Bore | 4.1 in | 3.9 in | 5 in |
| Displacement | 268.5 in³ | 221 in³ | 763 in³ |
| Stroke | 127 mm | 5 in | 6 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 39680 lb | 39683 lb | - |
| Operating Weight Minimum | 34610 lb | 33069 lb | - |
| Note (1) | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | - | - |
| Forward/Reverse - 1st Gear | 6.2 mile/h | - | - |
| Forward/Reverse - 2nd Gear | 21.7 mile/h | - | - |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | - |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | - |
| Drawbar Pull | 23380 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 73 gal/min | 71 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | - |
| Maximum Pressure - Equipment | - | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | - | 5149 psi | 3771 psi |
| Maximum Pressure - Travel | - | 5076 psi | 5076 psi |
| Main System - Maximum Flow | - | - | 779 l/min (206 gal/min) |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing Mechanism |
|||
| Maximum Swing Torque | 30340 ft·lbf | 28860 ft·lbf | 139000 ft·lbf |
| Swing Speed | 9.1 r/min | 9.1 r/min | 8.3 r/min |
Service Refill Capacities |
|||
| Fuel Tank | 74 gal (US) | 77.9 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | 5.3 gal (US) | - |
| Cooling System | 24 l | 6.3 gal (US) | 13.7 gal (US) |
| Hydraulic Tank | 23.8 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
| Hydraulic System - Including Tank | 58.1 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
| Final Drive | - | 0.6 gal (US) | - |
| Fuel Tank Capacity | - | - | 188.9 gal (US) |
| Engine Oil | - | - | 10.6 gal (US) |
| Swing Drive | - | - | 2.8 gal (US) |
| Final Drive - Each | - | - | 2.5 gal (US) |
| DEF Tank | - | - | 21.1 gal (US) |
Dimensions |
|||
| Boom | VA 5.2 m (17'1") | 5m (16' 6") | Reach 6.9 m (22'8") |
| Stick | 2.5m (8'2") | 2.2m (7' 3") | Reach 3.9 m (12'10") |
| Bucket | GD 0.76 m³ (0.99 yd³ ) | 0.76m3 (.78 yd3) | HD 3.3 m³ (4.32 yd³) |
| Shipping Height - Top of Cab | 10.9 ft | 3315 ft | 10.7 ft |
| Support Point | 10.1 ft | - | - |
| Shipping Length | 25.1 ft | 26.9 ft | 39.1 ft |
| Tail Swing Radius | 5.9 ft | 7.1 ft | 12.4 ft |
| Counterweight Clearance | 4.2 ft | 4.1 ft | 4.2 ft |
| Ground Clearance | 1.5 ft | 1.1 ft | 1.7 ft |
| Undercarriage Length | 16 ft | 16.1 ft | - |
| Wheel Base | 8.4 ft | 8.2 ft | - |
| Handrail Height | - | - | 11.1 ft |
| Track Length | - | - | 17.7 ft |
| Track Length to Center of Rollers | - | - | 14.4 ft |
| Track Gauge | - | - | 9 ft |
| Transport Width | - | - | 11.11 ft |
Working Ranges and Forces |
|||
| Boom Type | VA 5.2 m (17'1") | VA Boom | - |
| Stick | 2.5m (8'2") | R2.2CB (7' 3") | - |
| Bucket | GD 0.76 m³ (0.99 yd³ ) | 0.76m3 (0.99 y3) GD | - |
| Dump Height | 25.2 ft | 23 ft | - |
| Digging Height | 18.4 ft | 17.4 ft | - |
| Reach at Ground Level | 29.6 ft | 28.4 ft | - |
| Vertical Wall Digging Depth | 15 ft | 13.9 ft | - |
| Stick Forces (ISO) | 15961 lbf | - | - |
| Bucket Forces (ISO) | 23830 lbf | - | - |
| Note (1) | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | - |
working Ranges and Forces |
|||
| Cutting Height | 34.2 ft | - | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. |
Drive |
|||
| Maximum Travel Speed | - | 23 mile/h | - |
Sustainability |
|||
| Recyclability | - | 91% | - |
Weights |
|||
| Operating Weight | - | - | 107800 lb |
Working Ranges & Forces |
|||
| Maximum Digging Depth | - | - | 26.11 ft |
| Boom | - | - | Reach 6.9 m (22'8") |
| Stick | - | - | Reach 3.9 m (12'10") |
| Bucket | - | - | HD 3.3 m³ (4.32 yd³) |
| Maximum Reach at Ground Level | - | - | 39.9 ft |
| Maximum Cutting Height | - | - | 35.2 ft |
| Maximum Loading Height | - | - | 24.4 ft |
| Minimum Loading Height | - | - | 7.3 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 26.6 ft |
| Maximum Vertical Wall Digging Depth | - | - | 19.3 ft |
| Bucket Digging Force - ISO | - | - | 60000 lbf |
| Stick Digging Force - ISO | - | - | 41100 lbf |
Add a Similar Product:
-
M320 Wheeled Excavator Add
-
M322 Add
-
M316 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
374 Hydraulic Excavator Add