Compare Equipment Go Back
 M315 Wheeled Excavator |
 352 UHD Ultra High Demolition Hydraulic Excavator |
 M322 |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 148 HP | 425 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 150 hp (metric) | 431 hp (metric) | 176 hp (metric) |
| Engine Model | C4.4 | Cat C13 | C 7.1 |
| Net Power - ISO 9249 | 145 HP | 424 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 147 hp (metric) | 430 hp (metric) | 174 hp (metric) |
| Bore | 4.1 in | 5 in | 4.1 in |
| Displacement | 268.5 in³ | 763 in³ | 427.8 in² |
| Stroke | 127 mm | 6 in | 5.3 in |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 39680 lb | - | 52911 lb |
| Operating Weight Minimum | 34610 lb | - | 44750 lb |
Transmission |
|||
| Maximum Travel Speed | 21.7 mile/h | - | - |
| Forward/Reverse - 1st Gear | 6.2 mile/h | - | 5.6 mile/h |
| Forward/Reverse - 2nd Gear | 21.7 mile/h | - | 18.6 mile/h |
| Creeper Speed - 1st Gear | 3.4 mile/h | - | 3.4 mile/h |
| Creeper Speed - 2nd Gear | 9.3 mile/h | - | 9.3 mile/h |
| Drawbar Pull | 23380 lbf | - | 28551 lbf |
| Maximum Gradeability | - | - | 70% |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 73 gal/min | - | 95 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | 5366 psi |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | 5076 psi |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | 5076 psi |
| Main System - Maximum Flow | - | 779 l/min (206 gal/min) | - |
| Maximum Pressure - Equipment | - | 5076 psi | - |
| Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | - |
| Maximum Pressure - Swing | - | 3771 psi | - |
Swing Mechanism |
|||
| Maximum Swing Torque | 30340 ft·lbf | 139000 ft·lbf | - |
| Swing Speed | 9.1 r/min | 8.44 r/min | - |
| Swing Torque | - | - | 44250 lb/ft |
Service Refill Capacities |
|||
| Fuel Tank | 74 gal (US) | - | 124.2 gal (US) |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | - | 7.9 gal (US) |
| Cooling System | 24 l | 13.7 gal (US) | 10.6 gal (US) |
| Hydraulic Tank | 23.8 gal (US) | 57.3 gal (US) | 52.8 gal (US) |
| Hydraulic System - Including Tank | 58.1 gal (US) | 145.3 gal (US) | 71.3 gal (US) |
| Fuel Tank Capacity | - | 188.9 gal (US) | - |
| Engine Oil | - | 10.6 gal (US) | 3.4 gal (US) |
| Swing Drive - Each | - | 2.8 gal (US) | - |
| Final Drive - Each | - | 2.5 gal (US) | - |
| DEF Tank | - | 12.2 gal (US) | - |
Dimensions |
|||
| Boom | VA 5.2 m (17'1") | - | VA 5.4m (17'10") |
| Stick | 2.5m (8'2") | - | 2.9m (9'2") |
| Bucket | GD 0.76 m³ (0.99 yd³ ) | - | - |
| Shipping Height - Top of Cab | 10.9 ft | 11.1 ft | - |
| Support Point | 10.1 ft | - | 11.3 ft |
| Shipping Length | 25.1 ft | 61.8 ft | 31.1 ft |
| Tail Swing Radius | 5.9 ft | 12.3 ft | 9.2 ft |
| Counterweight Clearance | 4.2 ft | 4.7 ft | 4.3 ft |
| Ground Clearance | 1.5 ft | 1.7 ft | 1.25 ft |
| Undercarriage Length | 16 ft | - | - |
| Wheel Base | 8.4 ft | - | 9 ft |
| Note (1) | - | 28 m (91'10") UHD Front | - |
| Cab Height - With OPG | - | 11.8 ft | - |
| Track Length | - | 18.9 ft | - |
| Track Length to Center of Rollers | - | 15.6 ft | - |
| Working Gauge - Extended Position | - | 11.2 ft | - |
| Shipping Gauge - Retracted Position | - | 7.9 ft | - |
| Transport Width | - | 10.7 ft | - |
| Machine Length - without Front, with Counterweight | - | 25.5 ft | - |
| Machine Length - without Front and Counterweight | - | 24.9 ft | - |
| Track Width - Extended | - | 13.1 ft | - |
| Track Width - Retracted | - | 9.8 ft | - |
| Note (2) | - | 600 mm (24") Track Shoes | - |
| Shipping Height with Falling Object Guard | - | - | 11 ft |
Working Ranges and Forces |
|||
| Boom Type | VA 5.2 m (17'1") | - | VA 5.4m (17'10") |
| Stick | 2.5m (8'2") | - | 2.9m (9'2") |
| Bucket | GD 0.76 m³ (0.99 yd³ ) | - | GD 1.2 m³ (1.7 yd³) |
| Dump Height | 25.2 ft | - | - |
| Digging Height | 18.4 ft | - | - |
| Reach at Ground Level | 29.6 ft | - | 33.4 ft |
| Vertical Wall Digging Depth | 15 ft | - | 17.3 ft |
| Stick Forces (ISO) | 15961 lbf | - | 23605 lbf |
| Bucket Forces (ISO) | 23830 lbf | - | 33946 lbf |
| Maximum Pin Height at Stick Nose | - | 90.8 ft | - |
| Maximum Weight at Stick Nose | - | 8157 lb | - |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | 75.2 ft | - |
| Maximum Working Reach at Stick Nose - 1/2 | - | 45.4 ft | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 52.9 ft | - |
| Maximum Reach at Stick Nose | - | 51.7 ft | - |
| Note (1) | - | 28 m (91' 10") UHD Front Over-the-Front | - |
| Maximum Loading Height | - | - | 24.7 ft |
| Maximum Digging Depth | - | - | 21.8 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 21.6 ft |
working Ranges and Forces |
|||
| Cutting Height | 34.2 ft | - | 35.8 ft |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
| Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - |
Weights |
|||
| Operating Weight | - | 143300 lb | - |
| Note (1) | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. | - |
| Machine Weight - Retrofit Configuration | - | 139300 lb | - |
| Note (3) | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. | - |
| UHD in Cradle | - | 26000 lb | - |
| Retrofit Boom in Cradle - R3.9 TB Stick | - | 16310 lb | - |
| Retrofit Boom in Cradle - R3.35 TB Stick | - | 15950 lb | - |
| Retrofit Boom in Cradle - R2.9 TB Stick | - | 15760 lb | - |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | 4.22 r/min | - |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) | - |
| Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
| Maximum Pin Height at Stick Nose | - | 39.8 ft | - |
| Maximum Weight at Stick Nose | - | 13190 lb | - |
| Maximum Height at Stick Nose in Max Reach Position | - | 7.7 ft | - |
| Maximum Reach at Stick Nose | - | 36.5 ft | - |
| Maximum Digging Depth | - | 17 ft | - |
| Maximum Reach - Ground Level | - | 41.9 ft | - |
| Maximum Loading Height | - | 33.6 ft | - |
| Minimum Loading Height | - | 15 ft | - |
| Bucket Digging Force - ISO | - | 60250 lbf | - |
| Stick Digging Force - ISO | - | 44740 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | Bent - R3.35 m (11'0") Stick | - |
| Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
| Maximum Digging Depth | - | 21.9 ft | - |
| Maximum Reach - Ground Level | - | 39 ft | - |
| Maximum Cutting Height | - | 35.1 ft | - |
| Maximum Loading Height | - | 24.6 ft | - |
| Minimum Loading Height | - | 10 ft | - |
| Bucket Digging Force - ISO | - | 60250 lbf | - |
| Stick Digging Force - ISO | - | 44740 lbf | - |
Add a Similar Product:
-
M320 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 Hydraulic Excavator Add
-
374 Hydraulic Excavator Add