CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    M314 Wheeled Excavator
    View Product
    M318 Wheeled Excavator
    View Product Remove
    374 Hydraulic Excavator
    View Product Remove

    Engine
    Engine Power - ISO 14396 134 HP 174 HP 485 HP
    Engine Power - ISO 14396 (DIN) 136 hp (metric) 176 hp (metric) 492 hp (metric)
    Engine Model Cat C3.6 C4.4 Cat C15
    Net Power - ISO 9249 134 HP 171 HP 484 HP
    Net Power - ISO 9249 (DIN) 129 hp (metric) 174 hp (metric) 491 hp (metric)
    Bore 3.9 in 4 in 5.4 in
    Displacement 221 in³ 285.5 in³ 928 in³
    Stroke 5 in 5 in 6.7 in
    Biodiesel Capability Up to B20¹ Up to B20¹ Up to B20¹
    Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of
    Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

    Machine Weight
    Operating Weight Maximum 39683 lb 43980 lb -
    Note (1) Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. -
    Operating Weight Minimum 33069 lb 38580 lb -
    Note (2) - Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. -

    Drive
    Maximum Travel Speed 23 mile/h 21.7 mile/h -

    Hydraulic System
    Main System - Maximum Flow - Implement 71 gal/min 67 gal/min 237 gal/min
    Maximum Pressure - Equipment 5076 psi 5366 psi 5366 psi
    Maximum Pressure - Swing 5149 psi 5149 gal/min 5076 psi
    Maximum Pressure - Travel 5076 psi 5076 gal/min 5076 psi
    Maximum Pressure - Equipment - Lift Mode - - 5511 psi

    Swing Mechanism
    Maximum Swing Torque 28860 ft·lbf - 220000 ft·lbf
    Swing Speed 9.1 r/min 9.4 r/min 6.34 r/min
    Maximum Swing Speed - 32560 ft·lbf -

    Service Refill Capacities
    Cooling System 6.3 gal (US) 8.5 gal (US) 19 gal (US)
    Diesel Exhaust Fluid (DEF) 5.3 gal (US) 5.3 gal (US) -
    Final Drive 0.6 gal (US) 0.7 gal (US) -
    Fuel Tank 77.9 gal (US) 92.5 gal (US) -
    Hydraulic System - Including Tank 58.1 gal (US) 68.7 gal (US) 164 gal (US)
    Hydraulic Tank 23.8 gal (US) 31.7 gal (US) 86 gal (US)
    Fuel Tank Capacity - - 243 gal (US)
    Engine Oil - - 16 gal (US)
    Swing Drive - - 5 gal (US)
    Final Drive - Each - - 9 gal (US)
    DEF Tank - - 21 gal (US)

    Dimensions
    Boom 5m (16' 6") 5205 mm (17'1") Reach 7.8m (25'7")
    Bucket 0.76m3 (.78 yd3) 0.91 m³ GD (1.19 yd³) SD 3.3 m³ (4.32 yd³)
    Stick 2.2m (7' 3") 2.5 m (8' 2") R3.6m (11'10")
    Counterweight Clearance 4.1 ft 4.3 ft 4.1 ft
    Ground Clearance 1.1 ft 1.1 ft 2.6 ft
    Shipping Height - Top of Cab 3315 ft 11 ft 11.8 ft
    Shipping Length 26.9 ft 27.8 ft 44.9 ft
    Tail Swing Radius 7.1 ft 7.7 ft 13.8 ft
    Undercarriage Length 16.1 ft - -
    Wheel Base 8.2 ft 8.9 ft -
    Support Point - 11.5 ft -
    Handrail Height - - 13 ft
    Track Length - - 19.3 ft
    Track Length to Center of Rollers - - 15.5 ft
    Track Gauge - - 11.2 ft
    Transport Width - - 11.1 ft
    Note - - Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps

    Working Ranges and Forces
    Boom Type VA Boom VA Boom -
    Bucket 0.76m3 (0.99 y3) GD 0.91 m³ GD (1.19 yd³) -
    Stick R2.2CB (7' 3") 2.5 m (8' 2") -
    Digging Height 17.4 ft 19.3 ft -
    Dump Height 23 ft - -
    Reach at Ground Level 28.4 ft 30.2 ft -
    Vertical Wall Digging Depth 13.9 ft 15.1 ft -
    Note (1) Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o -
    Bucket Forces (ISO) - 26752 lbf -
    Stick Forces (ISO) - 16861 lbf -
    Cutting Height - 33.7 ft -

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

    Sustainability
    Recyclability 91% 92% -

    Service Refill
    Engine Oil - 2.9 gal (US) -

    Weights
    Operating Weight - - 162900 lb
    Note - - Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight.

    Working Ranges & Forces
    Maximum Digging Depth - - 28.1 ft
    Boom - - Reach 7.8m (25'7")
    Stick - - R3.6m (11'10")
    Bucket - - SD 3.3 m³ (4.32 yd³)
    Maximum Reach at Ground Level - - 43.2 ft
    Maximum Cutting Height - - 41.2 ft
    Maximum Loading Height - - 27.7 ft
    Minimum Loading Height - - 10.1 ft
    Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - - 27.8 ft
    Maximum Vertical Wall Digging Depth - - 22.8 ft
    Bucket Digging Force - ISO - - 80550 ft·lbf
    Stick Digging Force - ISO - - 66390 ft·lbf
    Add a Similar Product:
    • M319 Wheeled Excavator Add
    • M320 Wheeled Excavator Add
    • M322 Add
    • M316 Wheeled Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • M315 Wheeled Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add
    • 352 UHD Ultra High Demolition Hydraulic Excavator Add
    • 395 Excavator Add
    • 352 Hydraulic Excavator Add