Compare Equipment Go Back
M314 Wheeled Excavator |
M316 Wheeled Excavator |
M320 Wheeled Excavator |
M322 |
|
Engine |
||||
---|---|---|---|---|
Engine Power - ISO 14396 | 134 HP | 148 HP | 174 HP | 174 HP |
Engine Power - ISO 14396 (DIN) | 136 hp (metric) | 150 hp (metric) | 176 hp (metric) | 176 hp (metric) |
Engine Model | Cat C3.6 | Cat C4.4 | C4.4 | C 7.1 |
Net Power - ISO 9249 | 134 HP | 141 HP | 171 HP | 171 HP |
Net Power - ISO 9249 (DIN) | 129 hp (metric) | 143 hp (metric) | 174 hp (metric) | 174 hp (metric) |
Bore | 3.9 in | 4 ft | 4 in | 4.1 in |
Displacement | 221 in³ | 268.5 in³ | 268.5 in³ | 427.8 in² |
Stroke | 5 in | - | 5.3 in | 5.3 in |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
||||
Operating Weight Maximum | 39683 lb | 36400 lb | 46740 lb | 52911 lb |
Note (1) | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - | - |
Operating Weight Minimum | 33069 lb | - | 41450 lb | 44750 lb |
Drive |
||||
Maximum Travel Speed | 23 mile/h | 21.7 mile/h | - | - |
Hydraulic System |
||||
Main System - Maximum Flow - Implement | 71 gal/min | 73 gal/min | 81 gal/min | 95 gal/min |
Maximum Pressure - Equipment | 5076 psi | 5076 psi | 5366 psi | - |
Maximum Pressure - Swing | 5149 psi | 5076 psi | 5729 gal/min | - |
Maximum Pressure - Travel | 5076 psi | 5076 psi | 5076 gal/min | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Maximum Swing Torque | 28860 ft·lbf | 32560 ft·lbf | 37000 ft·lbf | - |
Swing Speed | 9.1 r/min | 10.2 r/min | 9.2 r/min | - |
Swing Torque | - | - | - | 44250 lb/ft |
Service Refill Capacities |
||||
Cooling System | 6.3 gal (US) | 6.3 gal (US) | 8.4 gal (US) | 10.6 gal (US) |
Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | - | 7.9 gal (US) | 7.9 gal (US) |
Final Drive | 0.6 gal (US) | 0.7 gal (US) | 0.7 gal (US) | - |
Fuel Tank | 77.9 gal (US) | 92.5 gal (US) | 124.2 gal (US) | 124.2 gal (US) |
Hydraulic System - Including Tank | 58.1 gal (US) | 68.7 gal (US) | 71.3 gal (US) | 71.3 gal (US) |
Hydraulic Tank | 23.8 gal (US) | 31.7 gal (US) | 40.9 gal (US) | 52.8 gal (US) |
Engine Oil | - | - | - | 3.4 gal (US) |
Dimensions |
||||
Boom | 5m (16' 6") | 5205 mm (17' 1") | 5260 mm (17'3") | VA 5.4m (17'10") |
Bucket | 0.76m3 (.78 yd3) | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | - |
Stick | 2.2m (7' 3") | 2.5 m (8' 2") | 2.5 m (8' 2") | 2.9m (9'2") |
Counterweight Clearance | 4.1 ft | 4.3 ft | 4.3 ft | 4.3 ft |
Ground Clearance | 1.1 ft | 1.3 ft | 1.4 ft | 1.25 ft |
Shipping Height - Top of Cab | 3315 ft | 10.5 ft | 11 ft | - |
Shipping Length | 26.9 ft | 8630 ft | 29.3 ft | 31.1 ft |
Tail Swing Radius | 7.1 ft | 7.7 ft | 8.5 ft | 9.2 ft |
Undercarriage Length | 16.1 ft | 16.3 ft | - | - |
Wheel Base | 8.2 ft | 8.4 ft | 8.9 ft | 9 ft |
Support Point | - | 12.7 ft | 11.8 ft | 11.3 ft |
Shipping Height with Falling Object Guard | - | - | - | 11 ft |
Working Ranges and Forces |
||||
Boom Type | VA Boom | VA Boom | VA Boom | VA 5.4m (17'10") |
Bucket | 0.76m3 (0.99 y3) GD | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) | GD 1.2 m³ (1.7 yd³) |
Stick | R2.2CB (7' 3") | R2.5 (8' 2") | 2.5 m (8' 2") | 2.9m (9'2") |
Digging Height | 17.4 ft | 18.5 ft | - | - |
Dump Height | 23 ft | - | - | - |
Reach at Ground Level | 28.4 ft | 29.4 ft | 30.5 ft | 33.4 ft |
Vertical Wall Digging Depth | 13.9 ft | 14.5 mm | 13.9 ft | 17.3 ft |
Note (1) | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - |
Cutting Height | - | 33.2 ft | 32.6 ft | - |
Bucket Forces (ISO) | - | - | 30799 lbf | 33946 lbf |
Stick Forces (ISO) | - | - | 20682 lbf | 23605 lbf |
Maximum Loading Height | - | - | - | 24.7 ft |
Maximum Digging Depth | - | - | - | 21.8 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 21.6 ft |
Air Conditioning System |
||||
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Sustainability |
||||
Recyclability | 91% | - | - | - |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | - | 18.6 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 5.6 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 28551 lbf |
Maximum Gradeability | - | - | - | 70% |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.8 ft |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add