Compare Equipment Go Back
352 LRE Long Reach Excavation Hydraulic Excavator |
M320 Wheeled Excavator |
395 Excavator |
M322 |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 424 HP | 171 HP | 542 HP | 171 HP |
Net Power - ISO 9249 (DIN) | 429.9 hp (metric) | 174 hp (metric) | 550 hp (metric) | 174 hp (metric) |
Engine Model | Cat C13 | C4.4 | Cat C18 | C 7.1 |
Engine Power - ISO 14396 | 425 HP | 174 HP | 543 HP | 174 HP |
Engine Power - ISO 14396 (DIN) | 431 hp (metric) | 176 hp (metric) | 551 hp (metric) | 176 hp (metric) |
Bore | 5 in | 4 in | 6 in | 4.1 in |
Stroke | 6 in | 5.3 in | 7 in | 5.3 in |
Displacement | 763 in³ | 268.5 in³ | 1105 in³ | 427.8 in² |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 128800 lb | - | 207400 lb | - |
Note | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - | - | - |
Note (1) | - | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. | - |
Working Ranges & Forces |
||||
Maximum Digging Depth | 42.8 ft | - | 31.9 ft | - |
Boom | LRE Boom 11.5 m (37'9") | - | GP 8.4m (25'7") | - |
Stick | LRE Stick 8.5 m (27'11') | - | R4.4m (14'5") | - |
Bucket | HD 1.19 m³ (1.56 yd³) | - | SD 5.2m³ (6.8 yd³) | - |
Maximum Reach at Ground Level | 64.4 ft | - | 48.3 ft | - |
Maximum Cutting Height | 48.2 ft | - | 44.5 ft | - |
Maximum Loading Height | 39.4 ft | - | 30.4 ft | - |
Minimum Loading Height | 7.3 ft | - | 9.11 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 42.5 ft | - | 31.4 ft | - |
Bucket Digging Force - ISO | 31700 lbf | - | 86100 ft·lbf | - |
Stick Digging Force - ISO | 23380 lbf | - | 68540 ft·lbf | - |
Maximum Vertical Wall Digging Depth | - | - | 22.3 ft | - |
Hydraulic System |
||||
Maximum Flow - Main System | 206 gal/min | - | - | - |
Maximum Pressure - Equipment | 5076 psi | 5366 psi | 5366 psi | - |
Maximum Pressure - Equipment - Lift Mode | 5511 psi | - | - | - |
Maximum Pressure - Travel | 5076 psi | 5076 gal/min | 5076 psi | - |
Maximum Pressure - Swing | 3771 psi | 5729 gal/min | 4496 psi | - |
Main System - Maximum Flow - Implement | - | 81 gal/min | 281 gal/min | 95 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | - | 5366 psi |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | - | 5076 psi |
Maximum Pressure - Implement Circuit - Normal | - | - | - | 5076 psi |
Swing Mechanism |
||||
Maximum Swing Torque | 138000 ft·lbf | 37000 ft·lbf | 267333 ft·lbf | - |
Swing Speed | - | 9.2 r/min | 6.26 r/min | - |
Swing Torque | - | - | - | 44250 lb/ft |
Service Refill Capacities |
||||
Fuel Tank Capacity | 188.9 gal (US) | - | 322 gal (US) | - |
Cooling System | 13.7 gal (US) | 8.4 gal (US) | 19 gal (US) | 10.6 gal (US) |
Engine Oil - With Filter | 10.6 gal (US) | - | - | - |
Swing Drive | 2.8 gal (US) | - | 6 gal (US) | - |
Final Drive - Each | 2.5 gal (US) | - | 5 gal (US) | - |
Hydraulic System - Including Tank | 145.3 gal (US) | 71.3 gal (US) | 196 gal (US) | 71.3 gal (US) |
Hydraulic Tank | 57.3 gal (US) | 40.9 gal (US) | 98 gal (US) | 52.8 gal (US) |
DEF Tank | 12.2 gal (US) | - | 21 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - | 7.9 gal (US) |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 124.2 gal (US) | - | 124.2 gal (US) |
Engine Oil | - | - | 18 gal (US) | 3.4 gal (US) |
Dimensions |
||||
Boom | LRE Boom 11.5 m (37'9") | 5260 mm (17'3") | GP 8.4m (25'7") | VA 5.4m (17'10") |
Stick | LRE Stick 8.5 m (27'11') | 2.5 m (8' 2") | R4.4m (14'5") | 2.9m (9'2") |
Bucket | HD 1.19 m³ (1.56 yd³) | 0.98 m³ GD (1.28 yd³) | SD 5.2m³ (6.8 yd³) | - |
Shipping Height - Top of Cab | 11.1 ft | 11 ft | 12 ft | - |
Handrail Height | 11.6 ft | - | 12.4 ft | - |
Shipping Length | 54 ft | 29.3 ft | 49.6 ft | 31.1 ft |
Tail Swing Radius | 12.3 ft | 8.5 ft | 15.11 ft | 9.2 ft |
Counterweight Clearance | 4.7 ft | 4.3 ft | 5.5 ft | 4.3 ft |
Ground Clearance | 2.3 ft | 1.4 ft | 2.9 ft | 1.25 ft |
Track Length | 17.6 ft | - | 20.1 ft | - |
Track Length to Center of Rollers | 14.2 ft | - | 16.1 ft | - |
Track Gauge | 10.6 ft | - | 11.6 ft | - |
Transport Width | 13.6 ft | - | 12.9 ft | - |
Support Point | - | 11.8 ft | - | 11.3 ft |
Wheel Base | - | 8.9 ft | - | 9 ft |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps | - |
Shipping Height with Falling Object Guard | - | - | - | 11 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
Machine Weight |
||||
Operating Weight Maximum | - | 46740 lb | - | 52911 lb |
Operating Weight Minimum | - | 41450 lb | - | 44750 lb |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Forward/Reverse - 2nd Gear | - | - | - | 18.6 mile/h |
Forward/Reverse - 1st Gear | - | - | - | 5.6 mile/h |
Creeper Speed - 1st Gear | - | - | - | 3.4 mile/h |
Creeper Speed - 2nd Gear | - | - | - | 9.3 mile/h |
Drawbar Pull | - | - | - | 28551 lbf |
Maximum Gradeability | - | - | - | 70% |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | - | VA 5.4m (17'10") |
Bucket | - | 0.98 m³ GD (1.28 yd³) | - | GD 1.2 m³ (1.7 yd³) |
Stick | - | 2.5 m (8' 2") | - | 2.9m (9'2") |
Reach at Ground Level | - | 30.5 ft | - | 33.4 ft |
Vertical Wall Digging Depth | - | 13.9 ft | - | 17.3 ft |
Cutting Height | - | 32.6 ft | - | - |
Bucket Forces (ISO) | - | 30799 lbf | - | 33946 lbf |
Stick Forces (ISO) | - | 20682 lbf | - | 23605 lbf |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Maximum Loading Height | - | - | - | 24.7 ft |
Maximum Digging Depth | - | - | - | 21.8 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | - | 21.6 ft |
Sustainability |
||||
Recyclability | - | - | 98% | - |
working Ranges and Forces |
||||
Cutting Height | - | - | - | 35.8 ft |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 374 Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- Cat® 340 Hydraulic Excavator Add