Compare Equipment Go Back
 302 CR Mini Hydraulic Excavator |
 M316 Wheeled Excavator |
|
|
Engine |
|||
|---|---|---|---|
| Net Power | 21 HP | - | - |
| Engine Model | C1.1 | Cat C4.4 | - |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
| Bore | 3 in | 4 ft | - |
| Stroke | 3.2 in | - | - |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
| Displacement | 69 in³ | 268.5 in³ | - |
| Note (1) | Engine power is tested per ISO 14396:2002. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | - |
| Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. | - | - |
| Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP | - | - |
| Gross Power - SAE J1995:2014 | 21.6 HP | - | - |
| Engine Power - ISO 14396 | - | 148 HP | - |
| Engine Power - ISO 14396 (DIN) | - | 150 hp (metric) | - |
| Net Power - ISO 9249 | - | 141 HP | - |
| Net Power - ISO 9249 (DIN) | - | 143 hp (metric) | - |
| Biodiesel Capability | - | Up to B20¹ | - |
Weights |
|||
| Operating Weight | 4987 lb | - | - |
| Maximum Operating Weight with Cab** | 4987 lb | - | - |
| Minimum Operating Weight with Canopy* | 4229 lb | - | - |
| Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. | - | - |
| Maximum Operating Weight with Canopy** | 4588 lb | - | - |
| Minimum Operating Weight with Cab* | 4535 lb | - | - |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. | - | - |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | - | - |
| EU: CE Plate Weight with Cab*** | 4718 lb | - | - |
| EU: CE Plate Weight with Canopy*** | 4508 lb | - | - |
Dimensions - Long Stick |
|||
| Dig Depth | 101.2 in | - | - |
| Track Belt/Shoe Width | 9.8 in | - | - |
| Tail Swing | 29.5 in | - | - |
| Maximum Dump Clearance | 103.9 in | - | - |
| Vertical Wall | 76.4 in | - | - |
| Boom In Reach | 65.4 in | - | - |
| O/A Shipping Height | 90.6 in | - | - |
| Maximum Blade Depth | 11.6 in | - | - |
| Track Width - Retracted | 42.9 in | - | - |
| Stick Length | 45.7 in | - | - |
| Boom Height - Shipping Position | 40.2 in | - | - |
| Maximum Reach | 168.1 in | - | - |
| Swing Bearing - Height | 17.4 in | - | - |
| Boom Swing - Right | 50 ° | - | - |
| Track Width - Expanded | 55.12 in | - | - |
| Boom Swing - Left | 65 ° | - | - |
| Maximum Dig Height | 142.5 in | - | - |
| O/A Undercarriage Length | 72.8 in | - | - |
| Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - |
| Maximum Blade Height | 11.2 in | - | - |
| Maximum Reach - Ground Level | 165.7 in | - | - |
| Overall Shipping Length* | 152.8 in | - | - |
| Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Blade |
|||
| Height | 8.9 in | - | - |
| Width* | 42.9 in | - | - |
| Note | *Expanded – 1400 mm (55 in) | - | - |
Dimensions - Standard Stick |
|||
| Dig Depth | 93.3 in | - | - |
| Maximum Dig Height | 139.8 in | - | - |
| Track Belt/Shoe Width | 9.8 in | - | - |
| Tail Swing | 29.5 in | - | - |
| Boom Height - Shipping Position | 42.1 in | - | - |
| O/A Shipping Height | 90.6 in | - | - |
| Overall Shipping Length* | 153.5 in | - | - |
| Maximum Blade Height | 11.2 in | - | - |
| Maximum Reach | 161.8 in | - | - |
| Boom Swing - Right | 50 ° | - | - |
| Track Width - Expanded | 55.12 in | - | - |
| O/A Undercarriage Length | 72.8 in | - | - |
| Track Width - Retracted | 42.9 in | - | - |
| Maximum Reach - Ground Level | 159.1 in | - | - |
| Swing Bearing - Height | 17.4 in | - | - |
| Stick Length | 37.8 in | - | - |
| Boom Swing - Left | 65 ° | - | - |
| Boom In Reach | 65.4 in | - | - |
| Maximum Dump Clearance | 100.8 in | - | - |
| Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - |
| Maximum Blade Depth | 11.6 in | - | - |
| Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
| Vertical Wall | 72.8 in | - | - |
Weight Increase from Minimum Configuration |
|||
| Steel Tracks | 132 lb | - | - |
| Long Stick | 18 lb | - | - |
| Expandable Undercarriage | 212 lb | - | - |
Certification - Cab and Canopy |
|||
| Top Guard | ISO 10262:1998 (Level I) | - | - |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Hydraulic System |
|||
| Pump Flow at 2,400 rpm | 17.4 gal/min | - | - |
| Digging Force - Stick - Standard | 2540.3 lbf | - | - |
| Auxiliary Circuit - Primary - Flow | 8.7 gal/min | - | - |
| Digging Force - Bucket | 4406.3 lbf | - | - |
| Auxiliary Circuit - Secondary - Pressure | 3553.4 psi | - | - |
| Operating Pressure - Travel | 3553.4 psi | - | - |
| Operating Pressure - Equipment | 3553.4 psi | - | - |
| Operating Pressure - Swing | 2132.1 psi | - | - |
| Digging Force - Stick - Long | 2203.1 lbf | - | - |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
| Auxiliary Circuit - Primary - Pressure | 3553.4 psi | - | - |
| Auxiliary Circuit - Secondary - Flow | 3.7 gal/min | - | - |
| Main System - Maximum Flow - Implement | - | 73 gal/min | - |
| Maximum Pressure - Equipment | - | 5076 psi | - |
| Maximum Pressure - Swing | - | 5076 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | - |
Swing System |
|||
| Machine Swing Speed | 9.8 r/min | - | - |
Sound |
|||
| Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) | - | - |
| Note | European Union Directive “2000/14/EC” | - | - |
| Operator Sound Pressure (ISO 6396:2008) | 73 dB(A) | - | - |
Service Refill Capacities |
|||
| Cooling System | 1 gal (US) | 6.3 gal (US) | - |
| Hydraulic Tank | 4.8 gal (US) | 31.7 gal (US) | - |
| Hydraulic System | 6.9 gal (US) | - | - |
| Engine Oil | 1.2 gal (US) | - | - |
| Fuel Tank | 6.9 gal (US) | 92.5 gal (US) | - |
| Final Drive | - | 0.7 gal (US) | - |
| Hydraulic System - Including Tank | - | 68.7 gal (US) | - |
Travel System |
|||
| Travel Speed - High | 2.7 mile/h | - | - |
| Travel Speed - Low | 1.8 mile/h | - | - |
| Maximum Traction Force - Low Speed | 4496.2 lbf | - | - |
| Maximum Traction Force - High Speed | 2967.5 lbf | - | - |
| Gradeability - Maximum | 30 degrees | - | - |
| Ground Pressure - Maximum Weight | 3.9 psi | - | - |
| Ground Pressure - Minimum Weight | 3.4 psi | - | - |
Sustainability |
|||
| Recyclability | 95% | - | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 36400 lb | - |
| Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
Swing Mechanism |
|||
| Maximum Swing Torque | - | 32560 ft·lbf | - |
| Swing Speed | - | 10.2 r/min | - |
Dimensions |
|||
| Boom | - | 5205 mm (17' 1") | - |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | - |
| Stick | - | 2.5 m (8' 2") | - |
| Counterweight Clearance | - | 4.3 ft | - |
| Ground Clearance | - | 1.3 ft | - |
| Shipping Height - Top of Cab | - | 10.5 ft | - |
| Shipping Length | - | 8630 ft | - |
| Support Point | - | 12.7 ft | - |
| Tail Swing Radius | - | 7.7 ft | - |
| Undercarriage Length | - | 16.3 ft | - |
| Wheel Base | - | 8.4 ft | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | - |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | - |
| Stick | - | R2.5 (8' 2") | - |
| Cutting Height | - | 33.2 ft | - |
| Reach at Ground Level | - | 29.4 ft | - |
| Vertical Wall Digging Depth | - | 14.5 mm | - |
| Digging Height | - | 18.5 ft | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | - |
Air Conditioning System |
|||
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Add a Similar Product:
-
M322 Add
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M314 Wheeled Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
374 Hydraulic Excavator Add