Compare Equipment Go Back
302 CR Mini Hydraulic Excavator |
M318 Wheeled Excavator |
M315 Wheeled Excavator |
352 UHD Ultra High Demolition Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power | 21 HP | - | - | - |
Engine Model | C1.1 | C4.4 | C4.4 | Cat C13 |
Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Bore | 3 in | 4 in | 4.1 in | 5 in |
Stroke | 3.2 in | 5 in | 127 mm | 6 in |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Displacement | 69 in³ | 285.5 in³ | 268.5 in³ | 763 in³ |
Note (1) | Engine power is tested per ISO 14396:2002. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. | - | - | - |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP | - | - | - |
Gross Power - SAE J1995:2014 | 21.6 HP | - | - | - |
Engine Power - ISO 14396 | - | 174 HP | 148 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | - | 176 hp (metric) | 150 hp (metric) | 431 hp (metric) |
Net Power - ISO 9249 | - | 171 HP | 145 HP | 424 HP |
Net Power - ISO 9249 (DIN) | - | 174 hp (metric) | 147 hp (metric) | 430 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Weights |
||||
Operating Weight | 4987 lb | - | - | 143300 lb |
Maximum Operating Weight with Cab** | 4987 lb | - | - | - |
Minimum Operating Weight with Canopy* | 4229 lb | - | - | - |
Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. | - | - | - |
Maximum Operating Weight with Canopy** | 4588 lb | - | - | - |
Minimum Operating Weight with Cab* | 4535 lb | - | - | - |
Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. | - | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. |
EU: CE Plate Weight with Cab*** | 4718 lb | - | - | - |
EU: CE Plate Weight with Canopy*** | 4508 lb | - | - | - |
Machine Weight - Retrofit Configuration | - | - | - | 139300 lb |
UHD in Cradle | - | - | - | 26000 lb |
Retrofit Boom in Cradle - R3.9 TB Stick | - | - | - | 16310 lb |
Retrofit Boom in Cradle - R3.35 TB Stick | - | - | - | 15950 lb |
Retrofit Boom in Cradle - R2.9 TB Stick | - | - | - | 15760 lb |
Dimensions - Long Stick |
||||
Dig Depth | 101.2 in | - | - | - |
Track Belt/Shoe Width | 9.8 in | - | - | - |
Tail Swing | 29.5 in | - | - | - |
Maximum Dump Clearance | 103.9 in | - | - | - |
Vertical Wall | 76.4 in | - | - | - |
Boom In Reach | 65.4 in | - | - | - |
O/A Shipping Height | 90.6 in | - | - | - |
Maximum Blade Depth | 11.6 in | - | - | - |
Track Width - Retracted | 42.9 in | - | - | - |
Stick Length | 45.7 in | - | - | - |
Boom Height - Shipping Position | 40.2 in | - | - | - |
Maximum Reach | 168.1 in | - | - | - |
Swing Bearing - Height | 17.4 in | - | - | - |
Boom Swing - Right | 50 ° | - | - | - |
Track Width - Expanded | 55.12 in | - | - | - |
Boom Swing - Left | 65 ° | - | - | - |
Maximum Dig Height | 142.5 in | - | - | - |
O/A Undercarriage Length | 72.8 in | - | - | - |
Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - | - |
Maximum Blade Height | 11.2 in | - | - | - |
Maximum Reach - Ground Level | 165.7 in | - | - | - |
Overall Shipping Length* | 152.8 in | - | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - | - |
Blade |
||||
Height | 8.9 in | - | - | - |
Width* | 42.9 in | - | - | - |
Note | *Expanded – 1400 mm (55 in) | - | - | - |
Dimensions - Standard Stick |
||||
Dig Depth | 93.3 in | - | - | - |
Maximum Dig Height | 139.8 in | - | - | - |
Track Belt/Shoe Width | 9.8 in | - | - | - |
Tail Swing | 29.5 in | - | - | - |
Boom Height - Shipping Position | 42.1 in | - | - | - |
O/A Shipping Height | 90.6 in | - | - | - |
Overall Shipping Length* | 153.5 in | - | - | - |
Maximum Blade Height | 11.2 in | - | - | - |
Maximum Reach | 161.8 in | - | - | - |
Boom Swing - Right | 50 ° | - | - | - |
Track Width - Expanded | 55.12 in | - | - | - |
O/A Undercarriage Length | 72.8 in | - | - | - |
Track Width - Retracted | 42.9 in | - | - | - |
Maximum Reach - Ground Level | 159.1 in | - | - | - |
Swing Bearing - Height | 17.4 in | - | - | - |
Stick Length | 37.8 in | - | - | - |
Boom Swing - Left | 65 ° | - | - | - |
Boom In Reach | 65.4 in | - | - | - |
Maximum Dump Clearance | 100.8 in | - | - | - |
Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - | - |
Maximum Blade Depth | 11.6 in | - | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - | - |
Vertical Wall | 72.8 in | - | - | - |
Weight Increase from Minimum Configuration |
||||
Steel Tracks | 132 lb | - | - | - |
Long Stick | 18 lb | - | - | - |
Expandable Undercarriage | 212 lb | - | - | - |
Certification - Cab and Canopy |
||||
Top Guard | ISO 10262:1998 (Level I) | - | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - | - |
Hydraulic System |
||||
Pump Flow at 2,400 rpm | 17.4 gal/min | - | - | - |
Digging Force - Stick - Standard | 2540.3 lbf | - | - | - |
Auxiliary Circuit - Primary - Flow | 8.7 gal/min | - | - | - |
Digging Force - Bucket | 4406.3 lbf | - | - | - |
Auxiliary Circuit - Secondary - Pressure | 3553.4 psi | - | - | - |
Operating Pressure - Travel | 3553.4 psi | - | - | - |
Operating Pressure - Equipment | 3553.4 psi | - | - | - |
Operating Pressure - Swing | 2132.1 psi | - | - | - |
Digging Force - Stick - Long | 2203.1 lbf | - | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - | - |
Auxiliary Circuit - Primary - Pressure | 3553.4 psi | - | - | - |
Auxiliary Circuit - Secondary - Flow | 3.7 gal/min | - | - | - |
Main System - Maximum Flow - Implement | - | 67 gal/min | 73 gal/min | - |
Maximum Pressure - Equipment | - | 5366 psi | - | 5076 psi |
Maximum Pressure - Swing | - | 5149 gal/min | - | 3771 psi |
Maximum Pressure - Travel | - | 5076 gal/min | - | 5076 psi |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Main System - Maximum Flow | - | - | - | 779 l/min (206 gal/min) |
Maximum Pressure - Equipment - Lift Mode | - | - | - | 5511 psi |
Swing System |
||||
Machine Swing Speed | 9.8 r/min | - | - | - |
Sound |
||||
Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) | - | - | - |
Note | European Union Directive “2000/14/EC” | - | - | - |
Operator Sound Pressure (ISO 6396:2008) | 73 dB(A) | - | - | - |
Service Refill Capacities |
||||
Cooling System | 1 gal (US) | 8.5 gal (US) | 24 l | 13.7 gal (US) |
Hydraulic Tank | 4.8 gal (US) | 31.7 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
Hydraulic System | 6.9 gal (US) | - | - | - |
Engine Oil | 1.2 gal (US) | - | - | 10.6 gal (US) |
Fuel Tank | 6.9 gal (US) | 92.5 gal (US) | 74 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | 5.3 gal (US) | - |
Hydraulic System - Including Tank | - | 68.7 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank Capacity | - | - | - | 188.9 gal (US) |
Swing Drive - Each | - | - | - | 2.8 gal (US) |
Final Drive - Each | - | - | - | 2.5 gal (US) |
DEF Tank | - | - | - | 12.2 gal (US) |
Travel System |
||||
Travel Speed - High | 2.7 mile/h | - | - | - |
Travel Speed - Low | 1.8 mile/h | - | - | - |
Maximum Traction Force - Low Speed | 4496.2 lbf | - | - | - |
Maximum Traction Force - High Speed | 2967.5 lbf | - | - | - |
Gradeability - Maximum | 30 degrees | - | - | - |
Ground Pressure - Maximum Weight | 3.9 psi | - | - | - |
Ground Pressure - Minimum Weight | 3.4 psi | - | - | - |
Sustainability |
||||
Recyclability | 95% | 92% | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 43980 lb | 39680 lb | - |
Operating Weight Minimum | - | 38580 lb | 34610 lb | - |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - | - |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - |
Drive |
||||
Maximum Travel Speed | - | 21.7 mile/h | - | - |
Dimensions |
||||
Boom | - | 5205 mm (17'1") | VA 5.2 m (17'1") | - |
Bucket | - | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
Stick | - | 2.5 m (8' 2") | 2.5m (8'2") | - |
Shipping Height - Top of Cab | - | 11 ft | 10.9 ft | 11.1 ft |
Shipping Length | - | 27.8 ft | 25.1 ft | 61.8 ft |
Counterweight Clearance | - | 4.3 ft | 4.2 ft | 4.7 ft |
Ground Clearance | - | 1.1 ft | 1.5 ft | 1.7 ft |
Support Point | - | 11.5 ft | 10.1 ft | - |
Tail Swing Radius | - | 7.7 ft | 5.9 ft | 12.3 ft |
Wheel Base | - | 8.9 ft | 8.4 ft | - |
Undercarriage Length | - | - | 16 ft | - |
Note (1) | - | - | - | 28 m (91'10") UHD Front |
Cab Height - With OPG | - | - | - | 11.8 ft |
Track Length | - | - | - | 18.9 ft |
Track Length to Center of Rollers | - | - | - | 15.6 ft |
Working Gauge - Extended Position | - | - | - | 11.2 ft |
Shipping Gauge - Retracted Position | - | - | - | 7.9 ft |
Transport Width | - | - | - | 10.7 ft |
Machine Length - without Front, with Counterweight | - | - | - | 25.5 ft |
Machine Length - without Front and Counterweight | - | - | - | 24.9 ft |
Track Width - Extended | - | - | - | 13.1 ft |
Track Width - Retracted | - | - | - | 9.8 ft |
Note (2) | - | - | - | 600 mm (24") Track Shoes |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA 5.2 m (17'1") | - |
Bucket | - | 0.91 m³ GD (1.19 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
Digging Height | - | 19.3 ft | 18.4 ft | - |
Stick | - | 2.5 m (8' 2") | 2.5m (8'2") | - |
Reach at Ground Level | - | 30.2 ft | 29.6 ft | - |
Vertical Wall Digging Depth | - | 15.1 ft | 15 ft | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - | 28 m (91' 10") UHD Front Over-the-Front |
Bucket Forces (ISO) | - | 26752 lbf | 23830 lbf | - |
Stick Forces (ISO) | - | 16861 lbf | 15961 lbf | - |
Cutting Height | - | 33.7 ft | - | - |
Dump Height | - | - | 25.2 ft | - |
Maximum Pin Height at Stick Nose | - | - | - | 90.8 ft |
Maximum Weight at Stick Nose | - | - | - | 8157 lb |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | - | 75.2 ft |
Maximum Working Reach at Stick Nose - 1/2 | - | - | - | 45.4 ft |
Maximum Height at Stick Nose in Max Reach Position | - | - | - | 52.9 ft |
Maximum Reach at Stick Nose | - | - | - | 51.7 ft |
Swing Mechanism |
||||
Maximum Swing Speed | - | 32560 ft·lbf | - | - |
Swing Speed | - | 9.4 r/min | 9.1 r/min | 8.44 r/min |
Maximum Swing Torque | - | - | 30340 ft·lbf | 139000 ft·lbf |
Service Refill |
||||
Engine Oil | - | 2.9 gal (US) | - | - |
Air Conditioning System |
||||
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Air Conditioning | - | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Transmission |
||||
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 34.2 ft | - |
Swing Mechanism - UHD Fronts |
||||
Swing Speed | - | - | - | 4.22 r/min |
Working Ranges and Forces - Retrofit Boom - Straight |
||||
Note 1 | - | - | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) |
Bucket | - | - | - | GD 3.08 m³ (4.03 yd³) |
Maximum Pin Height at Stick Nose | - | - | - | 39.8 ft |
Maximum Weight at Stick Nose | - | - | - | 13190 lb |
Maximum Height at Stick Nose in Max Reach Position | - | - | - | 7.7 ft |
Maximum Reach at Stick Nose | - | - | - | 36.5 ft |
Maximum Digging Depth | - | - | - | 17 ft |
Maximum Reach - Ground Level | - | - | - | 41.9 ft |
Maximum Loading Height | - | - | - | 33.6 ft |
Minimum Loading Height | - | - | - | 15 ft |
Bucket Digging Force - ISO | - | - | - | 60250 lbf |
Stick Digging Force - ISO | - | - | - | 44740 lbf |
Working Ranges and Forces - Retrofit Boom - Bent |
||||
Note 1 | - | - | - | Bent - R3.35 m (11'0") Stick |
Bucket | - | - | - | GD 3.08 m³ (4.03 yd³) |
Maximum Digging Depth | - | - | - | 21.9 ft |
Maximum Reach - Ground Level | - | - | - | 39 ft |
Maximum Cutting Height | - | - | - | 35.1 ft |
Maximum Loading Height | - | - | - | 24.6 ft |
Minimum Loading Height | - | - | - | 10 ft |
Bucket Digging Force - ISO | - | - | - | 60250 lbf |
Stick Digging Force - ISO | - | - | - | 44740 lbf |
Add a Similar Product: