Compare Equipment Go Back
302 CR Mini Hydraulic Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
M320 Wheeled Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 21 HP | - | - |
Engine Model | C1.1 | Cat C13 | C4.4 |
Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Bore | 3 in | 5 in | 4 in |
Stroke | 3.2 in | 6 in | 5.3 in |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
Displacement | 69 in³ | 763 in³ | 268.5 in³ |
Note (1) | Engine power is tested per ISO 14396:2002. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. | - | - |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP | - | - |
Gross Power - SAE J1995:2014 | 21.6 HP | - | - |
Net Power - ISO 9249 | - | 424 HP | 171 HP |
Net Power - ISO 9249 (DIN) | - | 429.9 hp (metric) | 174 hp (metric) |
Engine Power - ISO 14396 | - | 425 HP | 174 HP |
Engine Power - ISO 14396 (DIN) | - | 431 hp (metric) | 176 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
Weights |
|||
Operating Weight | 4987 lb | 128800 lb | - |
Maximum Operating Weight with Cab** | 4987 lb | - | - |
Minimum Operating Weight with Canopy* | 4229 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. | - | - |
Maximum Operating Weight with Canopy** | 4588 lb | - | - |
Minimum Operating Weight with Cab* | 4535 lb | - | - |
Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. | - | - |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | - | - |
EU: CE Plate Weight with Cab*** | 4718 lb | - | - |
EU: CE Plate Weight with Canopy*** | 4508 lb | - | - |
Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - |
Dimensions - Long Stick |
|||
Dig Depth | 101.2 in | - | - |
Track Belt/Shoe Width | 9.8 in | - | - |
Tail Swing | 29.5 in | - | - |
Maximum Dump Clearance | 103.9 in | - | - |
Vertical Wall | 76.4 in | - | - |
Boom In Reach | 65.4 in | - | - |
O/A Shipping Height | 90.6 in | - | - |
Maximum Blade Depth | 11.6 in | - | - |
Track Width - Retracted | 42.9 in | - | - |
Stick Length | 45.7 in | - | - |
Boom Height - Shipping Position | 40.2 in | - | - |
Maximum Reach | 168.1 in | - | - |
Swing Bearing - Height | 17.4 in | - | - |
Boom Swing - Right | 50 ° | - | - |
Track Width - Expanded | 55.12 in | - | - |
Boom Swing - Left | 65 ° | - | - |
Maximum Dig Height | 142.5 in | - | - |
O/A Undercarriage Length | 72.8 in | - | - |
Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - |
Maximum Blade Height | 11.2 in | - | - |
Maximum Reach - Ground Level | 165.7 in | - | - |
Overall Shipping Length* | 152.8 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Blade |
|||
Height | 8.9 in | - | - |
Width* | 42.9 in | - | - |
Note | *Expanded – 1400 mm (55 in) | - | - |
Dimensions - Standard Stick |
|||
Dig Depth | 93.3 in | - | - |
Maximum Dig Height | 139.8 in | - | - |
Track Belt/Shoe Width | 9.8 in | - | - |
Tail Swing | 29.5 in | - | - |
Boom Height - Shipping Position | 42.1 in | - | - |
O/A Shipping Height | 90.6 in | - | - |
Overall Shipping Length* | 153.5 in | - | - |
Maximum Blade Height | 11.2 in | - | - |
Maximum Reach | 161.8 in | - | - |
Boom Swing - Right | 50 ° | - | - |
Track Width - Expanded | 55.12 in | - | - |
O/A Undercarriage Length | 72.8 in | - | - |
Track Width - Retracted | 42.9 in | - | - |
Maximum Reach - Ground Level | 159.1 in | - | - |
Swing Bearing - Height | 17.4 in | - | - |
Stick Length | 37.8 in | - | - |
Boom Swing - Left | 65 ° | - | - |
Boom In Reach | 65.4 in | - | - |
Maximum Dump Clearance | 100.8 in | - | - |
Minimum Ground Clearance Below Undercarriage | 5.9 in | - | - |
Maximum Blade Depth | 11.6 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Vertical Wall | 72.8 in | - | - |
Weight Increase from Minimum Configuration |
|||
Steel Tracks | 132 lb | - | - |
Long Stick | 18 lb | - | - |
Expandable Undercarriage | 212 lb | - | - |
Certification - Cab and Canopy |
|||
Top Guard | ISO 10262:1998 (Level I) | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Hydraulic System |
|||
Pump Flow at 2,400 rpm | 17.4 gal/min | - | - |
Digging Force - Stick - Standard | 2540.3 lbf | - | - |
Auxiliary Circuit - Primary - Flow | 8.7 gal/min | - | - |
Digging Force - Bucket | 4406.3 lbf | - | - |
Auxiliary Circuit - Secondary - Pressure | 3553.4 psi | - | - |
Operating Pressure - Travel | 3553.4 psi | - | - |
Operating Pressure - Equipment | 3553.4 psi | - | - |
Operating Pressure - Swing | 2132.1 psi | - | - |
Digging Force - Stick - Long | 2203.1 lbf | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Auxiliary Circuit - Primary - Pressure | 3553.4 psi | - | - |
Auxiliary Circuit - Secondary - Flow | 3.7 gal/min | - | - |
Maximum Flow - Main System | - | 206 gal/min | - |
Maximum Pressure - Equipment | - | 5076 psi | 5366 psi |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - |
Maximum Pressure - Travel | - | 5076 psi | 5076 gal/min |
Maximum Pressure - Swing | - | 3771 psi | 5729 gal/min |
Main System - Maximum Flow - Implement | - | - | 81 gal/min |
Swing System |
|||
Machine Swing Speed | 9.8 r/min | - | - |
Sound |
|||
Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) | - | - |
Note | European Union Directive “2000/14/EC” | - | - |
Operator Sound Pressure (ISO 6396:2008) | 73 dB(A) | - | - |
Service Refill Capacities |
|||
Cooling System | 1 gal (US) | 13.7 gal (US) | 8.4 gal (US) |
Hydraulic Tank | 4.8 gal (US) | 57.3 gal (US) | 40.9 gal (US) |
Hydraulic System | 6.9 gal (US) | - | - |
Engine Oil | 1.2 gal (US) | - | - |
Fuel Tank | 6.9 gal (US) | - | 124.2 gal (US) |
Fuel Tank Capacity | - | 188.9 gal (US) | - |
Engine Oil - With Filter | - | 10.6 gal (US) | - |
Swing Drive | - | 2.8 gal (US) | - |
Final Drive - Each | - | 2.5 gal (US) | - |
Hydraulic System - Including Tank | - | 145.3 gal (US) | 71.3 gal (US) |
DEF Tank | - | 12.2 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | - | 7.9 gal (US) |
Final Drive | - | - | 0.7 gal (US) |
Travel System |
|||
Travel Speed - High | 2.7 mile/h | - | - |
Travel Speed - Low | 1.8 mile/h | - | - |
Maximum Traction Force - Low Speed | 4496.2 lbf | - | - |
Maximum Traction Force - High Speed | 2967.5 lbf | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Ground Pressure - Maximum Weight | 3.9 psi | - | - |
Ground Pressure - Minimum Weight | 3.4 psi | - | - |
Sustainability |
|||
Recyclability | 95% | - | - |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | 42.8 ft | - |
Boom | - | LRE Boom 11.5 m (37'9") | - |
Stick | - | LRE Stick 8.5 m (27'11') | - |
Bucket | - | HD 1.19 m³ (1.56 yd³) | - |
Maximum Reach at Ground Level | - | 64.4 ft | - |
Maximum Cutting Height | - | 48.2 ft | - |
Maximum Loading Height | - | 39.4 ft | - |
Minimum Loading Height | - | 7.3 ft | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - |
Bucket Digging Force - ISO | - | 31700 lbf | - |
Stick Digging Force - ISO | - | 23380 lbf | - |
Swing Mechanism |
|||
Maximum Swing Torque | - | 138000 ft·lbf | 37000 ft·lbf |
Swing Speed | - | - | 9.2 r/min |
Dimensions |
|||
Boom | - | LRE Boom 11.5 m (37'9") | 5260 mm (17'3") |
Stick | - | LRE Stick 8.5 m (27'11') | 2.5 m (8' 2") |
Bucket | - | HD 1.19 m³ (1.56 yd³) | 0.98 m³ GD (1.28 yd³) |
Shipping Height - Top of Cab | - | 11.1 ft | 11 ft |
Handrail Height | - | 11.6 ft | - |
Shipping Length | - | 54 ft | 29.3 ft |
Tail Swing Radius | - | 12.3 ft | 8.5 ft |
Counterweight Clearance | - | 4.7 ft | 4.3 ft |
Ground Clearance | - | 2.3 ft | 1.4 ft |
Track Length | - | 17.6 ft | - |
Track Length to Center of Rollers | - | 14.2 ft | - |
Track Gauge | - | 10.6 ft | - |
Transport Width | - | 13.6 ft | - |
Support Point | - | - | 11.8 ft |
Wheel Base | - | - | 8.9 ft |
Air Conditioning System |
|||
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
Note | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Machine Weight |
|||
Operating Weight Maximum | - | - | 46740 lb |
Operating Weight Minimum | - | - | 41450 lb |
Transmission |
|||
Maximum Travel Speed | - | - | 21.7 mile/h |
Working Ranges and Forces |
|||
Boom Type | - | - | VA Boom |
Bucket | - | - | 0.98 m³ GD (1.28 yd³) |
Stick | - | - | 2.5 m (8' 2") |
Reach at Ground Level | - | - | 30.5 ft |
Vertical Wall Digging Depth | - | - | 13.9 ft |
Cutting Height | - | - | 32.6 ft |
Bucket Forces (ISO) | - | - | 30799 lbf |
Stick Forces (ISO) | - | - | 20682 lbf |
Note (1) | - | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). |
Add a Similar Product: