Compare Equipment Go Back

301.8 Mini Hydraulic Excavator

Engine

Net Power 21 HP - -
Engine Model C1.1 - -
Note Net power is tested per ISO 9249:2007 and 80/1269/EEC. - -
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 21 HP - -
Gross Power - SAE J1995:2014 21.6 HP - -
Bore 3 in - -
Displacement 69 in³ - -
Stroke 3.2 in - -
Note (2) Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
Note (1) Engine power is tested per ISO 14396:2002. - -

Weights

Operating Weight 4473 lb - -
Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. - -
Note (1) *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. - -
Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. - -
EU: CE Plate Weight with Cab*** 4409 lb - -
EU: CE Plate Weight with Canopy*** 4145 lb - -
Maximum Operating Weight with Cab** 4473 lb - -
Minimum Operating Weight with Canopy* 3803 lb - -
Maximum Operating Weight with Canopy** 4211 lb - -
Minimum Operating Weight with Cab* 4075 lb - -

Dimensions - Long Stick

Dig Depth 101.2 in - -
Boom Height - Shipping Position 40.2 in - -
Minimum Ground Clearance Below Undercarriage 5.9 in - -
Note *Overall Shipping Length depends on blade position during shipment. - -
Track Belt/Shoe Width 9.1 in - -
Stick Length 45.7 in - -
Vertical Wall 76.4 in - -
Maximum Reach - Ground Level 155.9 in - -
Track Width - Expanded 51.18 in - -
O/A Undercarriage Length 62.6 in - -
O/A Shipping Height 90.6 in - -
Maximum Blade Height 10.6 in - -
Overall Shipping Length* 146.1 in - -
Tail Swing 39.2 in - -
Track Width - Retracted 39 in - -
Maximum Blade Depth 10.4 in - -
Boom In Reach 55.9 in - -
Maximum Dump Clearance 103.9 in - -
Boom Swing - Right 50 ° - -
Maximum Reach 158.7 in - -
Boom Swing - Left 65 ° - -
Maximum Dig Height 142.5 in - -
Swing Bearing - Height 17.4 in - -

Blade

Height 8.9 in - -
Width* 39 in - -
Note *Expanded – 1300 mm (51 in) - -

Dimensions - Standard Stick

O/A Undercarriage Length 62.6 in - -
Maximum Dump Clearance 100.8 in - -
O/A Shipping Height 90.6 in - -
Dig Depth 93.3 in - -
Boom In Reach 55.9 in - -
Maximum Reach - Ground Level 149.6 in - -
Maximum Blade Depth 10.4 in - -
Stick Length 37.8 in - -
Vertical Wall 72.8 in - -
Boom Height - Shipping Position 42.1 in - -
Track Width - Expanded 51.18 in - -
Overall Shipping Length* 146.5 in - -
Maximum Blade Height 10.6 in - -
Boom Swing - Right 50 ° - -
Note *Overall Shipping Length depends on blade position during shipment. - -
Minimum Ground Clearance Below Undercarriage 5.9 in - -
Maximum Reach 152.4 in - -
Swing Bearing - Height 17.4 in - -
Maximum Dig Height 139.8 in - -
Track Belt/Shoe Width 9.1 in - -
Tail Swing 39.2 in - -
Boom Swing - Left 65 ° - -
Track Width - Retracted 39 in - -

Travel System

Gradeability - Maximum 30 degrees - -
Travel Speed - Low 1.8 mile/h - -
Maximum Traction Force - High Speed 2675.2 lbf - -
Travel Speed - High 2.7 mile/h - -
Ground Pressure - Maximum Weight 4.3 psi - -
Maximum Traction Force - Low Speed 4136.5 lbf - -
Ground Pressure - Minimum Weight 3.9 psi - -

Certification - Cab and Canopy

Top Guard ISO 10262:1998 (Level I) - -
Tip Over Protective Structure (TOPS) ISO 12117:1997 - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -

Weight Increase from Minimum Configuration

Long Stick 18 lb - -
Expandable Undercarriage 271 lb - -
Steel Tracks 110 lb - -

Sound

Note European Union Directive “2000/14/EC” - -
Operator Sound Pressure (ISO 6396:2008) 73 dB(A) - -
Average Exterior Sound Pressure (ISO 6395:2008) 93 dB(A) - -

Sustainability

Recyclability 95% - -

Service Refill Capacities

Fuel Tank 6.9 gal (US) - -
Cooling System 1 gal (US) - -
Hydraulic Tank 4.8 gal (US) - -
Engine Oil 1.2 gal (US) - -
Hydraulic System 6.9 gal (US) - -

Hydraulic System

Operating Pressure - Equipment 3553.4 psi - -
Auxiliary Circuit - Secondary - Flow 3.7 gal/min - -
Digging Force - Bucket 4406.3 lbf - -
Operating Pressure - Travel 3553.4 psi - -
Digging Force - Stick - Long 2203.1 lbf - -
Auxiliary Circuit - Secondary - Pressure 3553.4 psi - -
Operating Pressure - Swing 2132.1 psi - -
Auxiliary Circuit - Primary - Flow 8.7 gal/min - -
Pump Flow at 2,400 rpm 17.4 gal/min - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Digging Force - Stick - Standard 2540.3 lbf - -
Auxiliary Circuit - Primary - Pressure 3553.4 psi - -

Swing System

Machine Swing Speed 9.8 r/min - -
Add a Similar Product:
  • M320 Wheeled Excavator Add
  • M322 Add
  • M318 Wheeled Excavator Add
  • M319 Wheeled Excavator Add
  • M314 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add