Compare Equipment Go Back
 MD6250 Rotary Blasthole Drill Specifications |
 MD6200 Rotary Blasthole Drill Specifications |
|
|
Pull-Down/Hoisting Capacity |
|||
|---|---|---|---|
| Pull-Down Capacity | Up to 20 411 kg (45,000 lb) | Up to 15 876 kg (Up to 35,000 lb) | - |
Specifications |
|||
| Hole Diameter | 165-250 mm (6.5-9.88 in) | 140-200 mm (5.5-7.87 in) | - |
| Engine | Cat® C27 | Cat© C18 | - |
| Bit Load | Up to 32 655 kg (Up to 71,993 lb) | Up to 16 964 kg (37,400 lb) | - |
Engine Choices |
|||
| Components (1) | Dual starter motors | - | - |
| Components (2) | Ether starting aid (ether bottle supplied locally) | - | - |
| Features | Scheduled Oil Sampling (S·O·SSM) ports | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 | 872 HP | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 (DIN) | 884 mhp (PS) | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 (DIN) | 838 mhp (PS) | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 | 826 HP | - | - |
| Emissions: Equivalent to U.S. EPA Tier 2 - Engine Power | C27 @ 1,800 rpm | - | - |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - Engine Power | C27 @ 1,800 rpm | - | - |
Cooling |
|||
| Components (1) | Coolers with easy cleaning access | Coolers with easy cleaning access | - |
| Components (2) | Separate engine cooling module | All cooler core sections are replaceable | - |
| Components (3) | All cooler core sections are replaceable | Functional in ambient temperature of up to 52� C (125� F) | - |
| Components (4) | Automatic variable speed fan control | Automatic variable speed fan control | - |
| Features | Functional in ambient temperature of 52° C (125° F) | - | - |
Climate Choices |
|||
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) | Rated down to -1C (30 F) | - |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) | Withstands high heat up to 52 C (125 F) | - |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (1) | Rated down to –40° C (–40° F) | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (2) | Diesel fired heating system that heats and circulates engine coolant through engine block, below deck water tank, heating elements for battery trays | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (3) | Full Arctic lubricant package to include engine and hydraulic oil | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, heat trace for hosing from water tank to water pump and water fast-fill assembly, plus primary tank | - | - |
| Climate Level 4 Arctic Fluids and Lubricants (5) | Shore power connection box with switchable 240-600V (50 amp) connection (diesel gen set and/or plug supplied locally). Box includes standard 50 hz battery charger, if 60 hz charger required, to be ordered via after market, refer to P-n 540-4271 | - | - |
| Climate Level 4 Arctic fluids and lubricants (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements if needed | - | - |
| Batteries, Sealed (1) | Quantity: Four (4) | - | - |
| Batteries, Sealed (2) | Quantity: Six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages) | - | - |
| Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V | - | Rated down to -18 C (0 F) | - |
Frame and Work Deck |
|||
| Features (1) | Leveling Jacks, A-frame/mast pivot and drill deck are welded integrally to mainframe for maximum durability and long life | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life | - |
| Features (2) | Primary fuel tank capacity 1416 L (374 gal) | Slip resistant surfaces | - |
| Features (3) | Fuel capacity expansion for additional 1416 L (374 gal) optional for total capacity of 2832 L (748 gal); (required for autonomy packages) | Fuel tank capacity 833 L (220 gal) | - |
| Features (4) | Three (3) egress points on deck areas in addition to main access | - | - |
| Components (1) | Stationary drill deck; for vertical and angle drilling | Three leveling jacks provide leveling on a 7� bench (any orientation) | - |
| Components (2) | Four leveling jacks provide leveling on a 7° bench (any orientation) | Heavy duty tow hooks (non-drill end) | - |
| Components (3) | Heavy duty tow hooks (front end) | Four (4) lift lugs, for use with cables or chains | - |
| Components (4) | Four (4) lift lugs, for use with cables or chains | - | - |
| Components (5) | Fixed access stairs to the cab area | - | - |
| Components (6) | Sturdy guardrails with toe guards, self-closing gates | - | - |
Undercarriage |
|||
| Model | Cat® 336E EL Excavator type | Cat® 336 Excavator type | - |
| Carrier Rollers | Three (3) | Three (3) | - |
| Track chain guards and guides | Level two | - | - |
| Drawbar Pull | 93745 lbf | 262 000 Nm (193,241 lbf-ft) | - |
| Triple Grousers (1) | 600 mm (23.6 in); for hard rock; 0.88 bar (12.7 psi) ground bearing pressure | 600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure | - |
| Triple Grousers (2) | 750 mm (29.5 in); for soft rock; 1.10 bar (15.9 psi) ground bearing pressure | - | - |
| Lower rollers | Twelve (12) | Eight (8) | - |
| Travel Speed | 1.5 mile/h | - | - |
| Components (1) | - | Track chain guards and guides | - |
| Travel Speed - High | - | 2 mile/h | - |
| Travel Speed - Low | - | 1.3 mile/h | - |
Hydraulics |
|||
| Components (1) | Two (2) primary pumps – 145 cc (piston, with proportional electronic controls) | Two (2) main pumps: 85 cc (piston with proportional electronic controls) | - |
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) | One (1) auxiliary circuit pump: 45 cc (piston, load sensing) | - |
| Components (3) | Two (2) fan pumps – 74 cc (piston, with proportional electronic controls) | One (1) fan pump: 45 cc (piston with proportional electronic controls) | - |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) | One (1) charge pump: 73.8 cc (gear, fixed displacement) | - |
| Components (5) | Scheduled Oil Sampling (S·O·S) ports | Scheduled Oil Sampling (S-O-S SM) ports | - |
Dimensions (Approximate) - 13.6 m (44.6 ft) Mast |
|||
| Width Non-Cab End | 15.9 ft | - | - |
| Width Cab End | 18.45 ft | - | - |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. | - | - |
| Mast Only Shipping Length | 61.4 ft | - | - |
| Height - Mast Up | 61.13 ft | - | - |
| Body Length | 38.41 ft | - | - |
| Length - Mast Down | 66.17 ft | - | - |
| Height - Mast Down | 16.84 ft | - | - |
Hydraulic Break Out Wrench |
|||
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 114-152 mm (4.5-6.0 in) | - | - |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 152-216 mm (6.0-8.5 in) | - | - |
Tool Package DTH |
|||
| Components (7) | Pipe wiper seal | Drill tool lubricator is included with selection of DTH Compressor | - |
| Components (8) | Drill tool lubricator is included with selection of DTH Compressor | Top sub | - |
| Components (1) | Two-piece roller deck bushing | Two-piece bushing | - |
| Components (2) | Pipe positioner rollers | Pipe positioner clamps | - |
| Components (3) | Deck wrench | Deck wrench | - |
| Components (4) | Shock sub | Shock sub | - |
| Components (5) | Top Sub | Cross over subs | - |
| Components (6) | Hammer Sub | Pipe wiper seal | - |
Safety and Security |
|||
| Feature | Approach angle of 15 degrees facilitates loading and unloading on a lowboy | - | - |
| Components (13) | Lifting lugs | - | - |
| Components (1) | Alloy drill deck covers, for servicing when mast is horizontal | Seven (7) emergency stop buttons | - |
| Components (2) | Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck | Hinged window guard over the full length of the front drill window | - |
| Components (3) | Over forty (40) conditional safety interlocks | Conditional safety interlocks | - |
| Components (4) | Hinged window guard over the full length of the front drill window | Self-closing gates | - |
| Components (5) | Three (3) egress points on deck areas in addition to main access | Electric horn activated by push button in the cab | - |
| Components (6) | Self-closing gates secure egress ladder locations | Automatic, audible tram alarm | - |
| Components (7) | Electric horn activated by push button in the cab | Battery disconnect and starter switches can be locked out | - |
| Components (8) | Automatic tram alarm, audible | Air hose retention devices | - |
| Components (9) | Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals | Slip resistant platform surfaces | - |
| Components (10) | Compressor air hoses with safety retention cables | Machine lifting provisions | - |
| Components (11) | Slip resistant surfaces | FOPS Certified Operator Cab | - |
| Components (12) | Tow hooks on non-drill-end | - | - |
| Feature (1) | - | Approach angle of 15-degrees facilitates loading and unloading on a lowboy | - |
Operator Environment |
|||
| Cab - Premium | – Additional storage – Leather seat with heat and ventilation – Heavy duty seat suspension – Dual pane window glass – Removable guard for driller window, plus window facing power train – Wipers for the driller window plus front and rear win |
- | - |
| Cab - Standard | – Fabric seat – Single pane window glass – Removable guard for driller window – Wiper for the driller window |
- | - |
| Cab Design | – Spacious FOPS cab is 3 m² (32.3 ft²) with an integrated operator station – Cab rubber shock-mounts – Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high de |
Falling Object Protective Structure (FOPS) certified cab includes: - Rubber shock-mounts to absorb mechanical vibration - Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) hig |
- |
| Seating | – Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) | - Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in) - Seat locks and has two point retractable, 76 mm (3 in) seat belt |
- |
| Windows | – Large windows front, rear and right cab side; full length drill window with guard – Windshield wipers with a common washer tank |
- Large windows on the front, rear and right cab side; full length drill window with guard - Window shades (option) - Windshield wiper with a common washer tank - Manometer Pressure Gauge (option) |
- |
| Lighting | – LED interior lights and map light at operators seat, backlit joysticks and keypads – Flood lights for the drill perimeter – Spotlights for power group area; drill deck; mast carousel; access ladder and walkways – Lighting package includes 4,200 |
- LED interior lights, backlit joysticks and keypads - Flood lights for the drill perimeter; area spotlights - Mast beacon and tram flashing strobe light (option) |
- |
| HVAC | – Floor heating vent – Roof-mounted air conditioner/heating/pressurizing unit – Filter access from deck – Defogging HVAC vents on main window |
- Floor heating vent - Filter access from deck, 500 hour service interval - Defogging HVAC vents on main window |
- |
| Cab Packages | - | Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass a |
- |
| Cameras | - | - Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation | - |
Operating System Controls - Standard |
|||
| Components (22) | Prewired for Terrain and autonomous operation | - | - |
| Components (23) | Drill Assist automated functionality: – Auto level, auto jack retract – Auto mast raise and lock, auto mast unlock and park |
- | - |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions | Electric controls for drilling, tramming, leveling plus auxiliary functions | - |
| Components (2) | Electronic compressor control | Rotary torque control | - |
| Components (3) | Rotary torque control | Virtual rotary head travel stops | - |
| Components (4) | Virtual rotary head travel stops and interlocks | Pipe positioner engaged/disengaged indicator | - |
| Components (5) | Pipe positioner engaged/disengaged indicator | Drill depth meter | - |
| Components (6) | Drill depth meter | Drill performance and display system | - |
| Components (7) | Drill performance and drill health display system | Delayed engine shut down | - |
| Components (8) | Data logging of machine health with warnings and fault code records with export capability | Filter indicators for hydraulic, fuel, compressor and engine | - |
| Components (9) | Delayed engine shut down | Jack pressure sensors | - |
| Components (10) | Rotary head rpm gauge (digital display in screen) | Data logging of machine health with warnings and fault code records with export capability | - |
| Components (11) | Filter indicators for hydraulic, fuel, compressor and engine | Dust suppression control | - |
| Components (12) | Jack pressure sensors in display | Mast lock indicator | - |
| Components (13) | Dust suppression control | ECM proportional fan speed control system | - |
| Components (14) | Mast lock indicator | Tram interlock, machine stability limits | - |
| Components (15) | ECM proportional fan speed control system | Tram interlock, pipe in hole | - |
| Components (16) | Tram interlock, machine stability limits | Tram interlock, mast up and locked or down and parked | - |
| Components (17) | Tram interlock, pipe in hole | Tram interlock, jacks retracted | - |
| Components (18) | Tram interlock, mast up and locked or down and parked | Tram interlock, winch parked | - |
| Components (19) | Tram interlock, jack retracted | Cab environment controls (AC, heat, fan speeds) | - |
| Components (20) | Tram interlock, winch parked | Pre wired for Terrain and Autonomous Operation | - |
| Components (21) | Cab environment controls (AC, filter, heat, fan speeds) | - | - |
Dimensions (Approximate) - 11.2 m (36.7 ft) Mast |
|||
| Width Non-Cab End | 15.9 ft | - | - |
| Width Cab End | 18.45 ft | - | - |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. | - | - |
| Mast Only Shipping Length | 53.5 ft | - | - |
| Height - Mast Up | 56.3 ft | - | - |
| Body Length | 38.41 ft | - | - |
| Length - Mast Down | 58.3 ft | - | - |
| Height - Mast Down | 16.84 ft | - | - |
Compressor/Receiver Choices |
|||
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE | - | - |
| Receiver Tank Choice (2) | High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE | - | - |
| Compressor - Rotary Drilling | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) | - | - |
| Compressor - DTH Drilling (1) | 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) | - | - |
| Compressor - DTH Drilling (2) | 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) | - | - |
| Features (1) | With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption | - | - |
| Features (2) | Electronic compressor control and regulation | - | - |
| Features (3) | DTH selection includes tool oiler | - | - |
Mast Packages |
|||
| Angle Drilling | Included with either mast | - | - |
| Mast Accessories Manual - 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Mast | One (1) wire rope pipe catcher, manual bit basket | - | - |
| Mast Accessories Hydraulic - 11.2 m (36.7 ft) Mast | One (1) hydraulically actuated pipe catcher, hydraulically operated bit basket | - | - |
| Mast Accessories Hydraulic - 13.6 m (44.6 ft) Mast | One (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket | - | - |
| Single-Pass Depth | - | 36 ft | - |
| Multi-Pass Depth | - | Down to 47.58 m (Down to 156 ft) | - |
| Pulldown - Rated Single Cylinder Pull-Down/Hoist System | - | Up to 15 876 kg (Up to 35,000 lb) | - |
| Hoist | - | Up to 11 907 kg (Up to 26,250 lb) | - |
Service Tool Options |
|||
| Lifting Bails (Available on Request) | – API thread 89 mm (3.5 in) – to lift corresponding drill tools (6.75 in tricone bits or 6-inch class DTH hammers) – API thread 114 mm (4.5 in) – to lift corresponding drill tooling (7.875 and 9.0 in tricone bits or 8-inch class DTH hammers) – API t |
- | - |
Drill Pipe |
|||
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 4 | 6.5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 1 | 5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 6 | 7.625 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 1 | 5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 3 | 6 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 6 | 7.625 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 4 | 6.5 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 3 | 6 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 2 | 5.5 in | - | - |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 5 | 7 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 2 | 5.5 in | - | - |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 5 | 7 in | - | - |
| 9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5 | - | 6 in | - |
| 9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4 | - | 5.5 in | - |
Carousel (Mast size and pipe diameter dependent) |
|||
| Pipe rack carousel, standard: | – 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes – 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes |
- | - |
Mast and Pipe Rack Carousel Features |
|||
| Features (7) | Sliding deck wrench assembly | - | - |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Single-Pass Depth | 44.6 ft | - | - |
| Features (5) | Auto tensioning of pull down and hoist cables | - | - |
| 11.2 m (36.7 ft) Mast - Hoist Speed | 2.65 ft/s | - | - |
| Features (3) | Drill strings configured for bit changes (above the deck) | - | - |
| Features (1) | Mast configurations complete with pipe rack carousel and angle drilling package (vertical, out to 30 degrees in 5-degree increments) | - | - |
| Features (8) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH | - | - |
| Features (10) | Drill pipe positioner | - | - |
| Features (11) | Rotation gear box with single motor up to 160 rpm, up to 11 700 N∙m (8,629 lbf-ft) torque | - | - |
| Features (9) | Closed circuit camera in mast is used to view pipe rack carousel/top drive operation while racking pipes | - | - |
| Features (6) | Variable grip hydraulic break out wrench for range of pipe diameters | - | - |
| 11.2 m (36.7 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 53.9 m (Down to 176.7 ft) | - | - |
| Features (4) | Single Hydraulic Cylinder and cable system for pulldown/hoist | - | - |
| Features (2) | Hydraulically actuated, self-indexing pipe rack carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in) | - | - |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 37.9 m (Down to 124.6 ft) | - | - |
| 13.6 m (44.6 ft) Mast - Hoist Speed | 2.16 ft/s | - | - |
| 11.2 m (36.7 ft) Mast - Bit Load (single pass) | Up to 22 321 kg (Up to 49,210 lb) | - | - |
| 11.2 m (36.7 ft) Mast - Pull-Down Capacity | Up to 20 411 kg (Up to 45,000 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Bit Load (single pass) | Up to 32 655 kg (Up to 71,993 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Pull-Down Capacity | Up to 29 483 kg (Up to 65,000 lb) | - | - |
| 13.6 m (44.6 ft) Mast - Hoist Capacity | Up to 16 584 kg (Up to 36,563 lb) | - | - |
| 11.2 m (36.7 ft) Mast - Hoist Capacity | Up to 15 309 kg (Up to 33,750 lb) | - | - |
Tool Package Rotary |
|||
| Components (1) | One-piece roller deck bushing | One-piece roller deck bushing | - |
| Components (2) | Pipe positioner rollers | Pipe positioner clamps | - |
| Components (3) | Deck wrench | Deck wrench | - |
| Components (4) | Top sub | Bit sub | - |
| Components (5) | Bit sub | Top sub | - |
| Components (6) | Pipe wiper seal | Pipe wiper seal | - |
| Components (7) | - | Drill tool lubricator (optional) | - |
Rotary Head Top Drive System |
|||
| Torque - Single Motor | 8629 lb/ft | 6166 lb/ft | - |
| Rotation Speed | 0-160 rpm | 0-150 rpm | - |
| Components (1) | Spindle – 140 mm (5.5 in) API regular thread with splined collar | Rotary torque control | - |
| Components (2) | Rotary torque control | Virtual rotary head travel interlocks | - |
| Components (3) | Virtual rotary head travel interlocks | Virtual rotary head travel interlocks | - |
Automation and Technology |
|||
| Type (1) | Cat Terrain ready | Autonomous ready | - |
| Type (2) | Autonomy ready | - | - |
| Components (1) | Drill depth indicator | Drill depth meter | - |
| Components (2) | Product Link™ Elite (hardware from factory, subscription package via dealer) | Drill Assist Automated Functionality (onboard technology): - Auto Level (with auto retract jacks) - Auto Mast (raise, lower and lock into place) - Auto Dril (single pass) |
- |
| Components (3) | - | Cat Terrain ready | - |
| Components (4) | - | Product Link™ Elite | - |
Dust Control Choices |
|||
| Choices (1) | Water injection – tank mounted below front deck 1271 L (336 gal) – Water flow meter, volume control, tank fill level indicator |
Static dust curtains, four sides boxed enclosed | - |
| Choices (2) | Water injection plus dry dust collector 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection – Self-cleaning filters, dust chute with ejector |
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector) | - |
| Choices (3) | High volume water injection (maximum) – tanks total capacity 2786 L (736 gal) – Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal) – Tank above deck capacity 1514 L (400 gal) |
Tram off spray system (option) | - |
| Choices (4) | Static dust curtains, four sided/boxed enclosed | - | - |
| High Volume Water Injection - Maximum - Tank Above Deck - Capacity | - | 200 gal (US) | - |
| Water Injection - Tank Mounted Below Front Deck - Components | - | Water flow meter, volume control, tank fill level indicator | - |
| High Volume Water Injection - Maximum - Tank Below Deck - Capacity | - | 200 gal (US) | - |
| Water Injection - Tank Mounted Below Front Deck | - | 200 gal (US) | - |
| High Volume Water Injection - Maximum - Tanks Total Capacity | - | 400 gal (US) | - |
| Water Injection plus Dust Collector (1) | - | 76.5 cmm (2,700 cfm) dust collector; includes standard water injection | - |
| Water Injection plus Dust Collector (2) | - | Self-cleaning filters, dust chute clean-out door | - |
Service Packages |
|||
| Package (1) | Fast fill for fuel and water, automated lubrication system | Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water | - |
| Package (2) | Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option) | Standard Package: Automated lubrication system, fast fill for fuel and water (option) | - |
| Package (3) | - | Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option) | - |
Weights |
|||
| Working Weight Range | 56 468 kg to 64 154 kg (124,490 lb to 141,436 lb) | 40 823 - 45 359 kg (90,000 - 100,000 lb) | - |
Basic Specs |
|||
| U.S. EPA Tier 2 Equivalent - Engine | - | C18 @ 1,800 rpm | - |
| U.S. EPA Tier 2 Equivalent - Emissions | - | U.S. EPA Tier 2 equivalent | - |
| U.S. EPA Tier 4 Final - Engine | - | C18 @ 1,800 rpm | - |
| U.S. EPA Tier 4 Final - Emissions | - | U.S. EPA Tier 4 Final | - |
| Compressor - Rotary Drilling | - | 32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi) | - |
| Angle Drilling Available | - | 30 degrees to 0 degrees in 5-degree increments | - |
| Bit Load (single-Pass) | - | 37400 lb | - |
| Hoist Speed | - | 4.3 ft/s | - |
| Hole Diameter Range | - | 140-200 mm (5.5-7.87 in) | - |
| Hole Depth Range - Single-Pass Depth | - | 36 ft | - |
| Compressor - DTH Drilling | - | 29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi) | - |
| Pull-DownCapacity | - | Up to 15 876 kg (Up to 35,000 lb) | - |
| Hoist Capacity | - | Up to 11 907 kg (Up to 26,250 lb) | - |
| Hole Depth Range - Multi-Pass Depth | - | Down to 47.58 m (Down to 156 ft) | - |
| U.S. EPA Tier 4 Final - Power Rating (ISO 14396) | - | 589 HP | - |
| U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396) | - | 587 HP | - |
Compressor Choices |
|||
| DTH Drilling | - | Includes tool lubrication system | - |
| Rotary Drilling | - | Optional tool lubrication system | - |
| Note | - | With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature. | - |
| DTH Drilling - 1050 cfm/350 psi | - | 29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler | - |
| Rotary Drilling - 1150 cfm/125 psi | - | 32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi) | - |
Receiver Tank Choices |
|||
| Choice (1) | - | Low pressure 8.6 bar (125 psi) | - |
| Choice (2) | - | High pressure 24.1 bar (350 psi) | - |
Frame Access Choices |
|||
| Choice (1) | - | Fixed access steps to the cab area | - |
| Choice (2) | - | Small platform to the cab includes fixed access steps | - |
| Choice (3) | - | Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates | - |
Drill Deck Misc. |
|||
| Components (1) | - | Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket | - |
Engine Features |
|||
| Feature (3) | - | Tier 4 Final package complete with DEF/Engine Shutdown Control Package | - |
| Feature (1) | - | Dual starter motors | - |
| Feature (2) | - | Ether starting aid | - |
Dimensions (Approximate) |
|||
| Width cab end* | - | 13.7 ft | - |
| Width non-cab end | - | 11.7 ft | - |
| Height mast up | - | 54.3 ft | - |
| Body Length | - | 31 ft | - |
| Length mast down | - | 57.5 ft | - |
| Height mast down | - | 11.75 ft | - |
| Mast only length | - | 52.1 ft | - |
| Note | - | *Contact the factory for width with platform access to cab or service platform walkway. | - |
Mast and Pipe Carousel Features |
|||
| Features (1) | - | Pipe carousel: Accepts quantity of four (4) 9.14 m (30 ft) pipes |
- |
| Features (2) | - | Standard angle drilling package (0 to 30 degrees, in�5-degree�increments) | - |
| Features (4) | - | Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in) | - |
| Features (5) | - | Drills strings configured for bit changes above deck | - |
| Features (6) | - | Single cylinder pulldown/hoist system | - |
| Features (7) | - | Sliding deck wrench assembly | - |
| Features (8) | - | Configured with roller deck bushing (for low pressure/tricone drilling) | - |
| Features (9) | - | Two-piece deck bushing (for high pressure DTH drilling) | - |
| Features (10) | - | Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating | - |
| Features (11) | - | Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in) | - |
| Features (12) | - | Closed circuit camera mounted in mast to view pipe carousel/top drive operation | - |
| Features (13) | - | Pipe positioner for angle drilling, multi-pass pipe handling | - |
| Features (14) | - | Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket | - |
Add a Similar Product:
-
MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration Add