CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    814 Wheel Dozer
    View Product
    D11 Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove
    D2 Dozer
    View Product Remove

    Engine - Tier 4 Final/EU Stage V
    Engine Model Cat C7.1 - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Net Power (ISO 9249:2007) 249 HP - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - - -
    Rated Speed 2200 r/min - - -
    Gross Power (SAE J1995:2014) 284 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 902 lb/ft - - -
    Torque Rise 52% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -
    Low Idle Speed 800 r/min - - -
    Maximum Altitude without Derating 9842.5 ft - - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight 48526 lb - - -

    Scoops
    Chip Scoop Doze Capacity 37.9 yd³ - - -
    Chip Scoop Carry Capacity 19 yd³ - - -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model Cat C7.1 - - -
    Emissions Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - - -
    Rated Speed 2200 r/min - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Gross Power (SAE J1995:2014) 286 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 749 lb/ft - - -
    Torque Rise 26% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight 47887 lb - - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight 52280 lb - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight 51639 lb - - -

    Transmission
    Transmission Type Cat Planetary Power Shift - Cat Planetary Power Shift -
    Forward - 1 3.7 mile/h - - -
    Forward - 2 6.5 mile/h - - -
    Forward - 3 11.2 mile/h - - -
    Forward - 4 19.4 mile/h - - -
    Reverse - 1 4.2 mile/h - - -
    Reverse - 2 7.3 mile/h - - -
    Reverse - 3 12.8 mile/h - - -
    Reverse - 4 22.1 mile/h - - -
    1.0 Forward - 2.5 mile/h - -
    2.0 Forward - 4.4 mile/h - -
    3.0 Forward - 7.6 mile/h - -
    1.0 Reverse - 3 mile/h - -
    2.0 Reverse - 5.3 mile/h - -
    3.0 Reverse - 9.1 mile/h - -
    Drawbar Pull - 3 Forward - 46250 ft·lbf - -
    Drawbar Pull - 1 Forward - 148200 ft·lbf - -
    Drawbar Pull - 2 Forward - 82300 ft·lbf - -
    Converter Drive - Forward 1 - - 4.4 mile/h -
    Converter Drive - Forward 2 - - 7.7 mile/h -
    Converter Drive - Forward 3 - - 13.2 mile/h -
    Converter Drive - Reverse 1 - - 4.8 mile/h -
    Converter Drive - Reverse 2 - - 8.4 mile/h -
    Converter Drive - Reverse 3 - - 14.6 mile/h -
    Direct Drive - Forward 1 - - Lock-up disabled -
    Direct Drive - Forward 2 - - 8.1 mile/h -
    Direct Drive - Forward 3 - - 14.2 mile/h -
    Direct Drive - Reverse 1 - - 5 mile/h -
    Direct Drive - Reverse 2 - - 8.9 mile/h -
    Direct Drive - Reverse 3 - - 15.6 mile/h -
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires. -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Relief Valve Settings - - - 7033 psi
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - - -
    Lift/Tilt System Variable displacement piston - - -
    Maximum Flow at 2,200 rpm 23.5 gal/min - - -
    Relief Valve Setting - Lift/Tilt 3190 psi - - -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) - 177 mm × 1760 mm (0.58 ft × 5.8 ft) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 101.6 mm × 234 mm (4.0 in × 9.2 in) - - -
    Pilot System Open center, fixed displacement gear - - -
    Pilot Relief Valve Setting 3046 psi - - -
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft) -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - Pilot, load sensing -
    Steering System - Pump Variable displacement piston - Piston, variable displacement -
    Maximum Flow at 2,200 rpm 38.8 gal/min - - -
    Relief Valve Setting - Steering 4003 psi - - -
    Total Steering Angle 72° - 86 degrees -
    Steering Cycle Times - High Idle 3 s - - -
    Steering Cycle Times - Low Idle 8.2 s - - -
    Minimum Turning Radius - Over Blade - - 31 ft -
    Relief Valve Setting - - 5004 psi -

    Service Refill Capacities
    Fuel Tank 132.1 gal (US) - - 51.5 gal (US)
    Diesel Exhaust Fluid Tank 4.2 gal (US) - - -
    Cooling Systems - Tier 4 Final/EU Stage V 21.4 gal (US) - - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA 19.3 gal (US) - - -
    Engine Crankcase 5.3 gal (US) 35.1 gal (US) - -
    Transmission 13.2 gal (US) - 45 gal (US) -
    Differential - Final Drives - Front 17.2 gal (US) - 98 gal (US) -
    Differential - Final Drives - Rear 17.2 gal (US) - 90 gal (US) -
    Hydraulic System - Implement/Steering 34.1 gal (US) - - -
    Hydraulic Tank Only 19.8 gal (US) - - -
    Cooling System - 46.8 gal (US) 53 gal (US) 5 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) - -
    Power Train - 120 gal (US) - -
    Power Train - Refill Volume - 103.3 gal (US) - -
    Final Drive - Each - 12.4 gal (US) - -
    Roller Frames - Each - 24.8 gal (US) - -
    Hydraulic Tank - 42.2 gal (US) - -
    Hydraulic System Tank and Chassis - 64.7 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) - -
    Fuel Tank - Standard - - 413 gal (US) -
    Crankcase - - 32 gal (US) -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US) -
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo -
    Crankcase - With Filter - - - 2.8 gal (US)
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)

    Axles
    Front Planetary – Fixed - Fixed -
    Rear Planetary – Oscillating - Trunnion -
    Oscillation Angle ±10° - - -

    Braking System
    Service Brakes Single Disc Wet (enclosed) 4 WHL - - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - - -

    Dimensions (Approximate)
    Height to Top of Beacon 13.1 ft - - -
    Height - Top of Cab 12.1 ft - - -
    Height - Top of Exhaust Pipe 11.3 ft - 17.17 ft -
    Height - Top of Hood 8.7 ft - 13 ft -
    Height to Top of Radiator Guard 8 ft - - -
    Ground Clearance to Hitch 1.4 ft - - -
    Ground Clearance to Transmission Guard 1.4 ft - - -
    Ground Clearance to Bottom of Bumper 2.3 ft - - -
    Centerline of Rear Axle to Bumper 6.5 ft - - -
    Centerline of Front Axle to Hitch 5.5 ft - 9.67 ft -
    Wheel Base 11 ft - 19.25 ft -
    Width over Platform 10.3 ft - - -
    Overall Length to Front Tire 21 ft - - -
    Overall Machine Length with Straight Blade 23.6 ft - - -
    Overall Machine Length with Coal Blade 25.5 ft - - -
    Height - Top of ROPS - - 18.25 ft -
    Ground Clearance - - 27 in -
    Centerline of Rear Axle to Edge of Bumper - - 13.75 ft -
    Length - With Blade on Ground - - 44 ft -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 111 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A) - - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 109 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 112 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 110 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Weights
    Operating Weight - 229800 lb 224647 lb 18382 lb
    Operating Weight - Carrydozer - 250665 lb - -
    Note (1) - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. - For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - - 19066 lb

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ - -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in - -
    U-Blade Capacity - 45 yd³ - -
    U-Blade Width - 249.6 in - -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ - -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in - -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ - -
    Carry Dozer - Width with blade (over end bits) - 263.9 in - -
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3) -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) - -
    Fuel Tank - Usable Volume - 475 gal (US) - -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump - -
    Combined Pump Output - Implement - 177 gal/min - -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Undercarriage
    Shoe Type - Extreme Service - -
    Width - Shoe - 28 in - -
    Width - Shoe - CD - 36 in - -
    Shoes/Side - 41 - -
    Grouser Height - 4 in - -
    Pitch - 12.5 in - -
    Ground Clearance* - 30.6 in - -
    Track Gauge - 114 in - 61 in
    Length - Track on Ground - 175 in - -
    Ground Contact Area - 9781 in² - -
    Ground Contact Area - CD - 12605 in² - -
    Track Rollers/Side - 8 - -
    Number of Carrier Rollers - 1 per side (optional) - -
    Length - Track on Ground - LGP - - - 89 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP - - - 68 in
    Ground Pressure - LGP - - - 4.3 psi
    Shoe Width - Standard - - - 18 in
    Shoe Width - LGP - - - 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 43
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 38
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 89 in

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb - -
    Maximum penetration depth (standard tip) - 63.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb - -
    Maximum penetration depth (standard tip) - 85.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in - -
    Maximum Penetration Force - Shank Vertical - 77350 lb - -
    Maximum Penetration - Standard Tip - 43.3 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb - -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in - -
    Length with SU-Blade** - No rear attachment - 345.1 in - -
    Overall Length SU-Blade and SS Ripper** - 421.7 in - -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - -

    Dimensions - D11
    Ground Clearance* - 31.4 in - -
    Track Gauge - 114 in - -
    Width at Outside of Track (710 mm Track Shoe) - 142 in - -
    Height (ROPS/canopy)* - 185.9 in - -
    Length of Track on Ground - 175 in - -
    Length with SU-Blade** - No rear attachment - 337.8 in - -
    Overall Length SU-Blade and SS Ripper** - 414.4 in - -
    Note - *Includes grouser height for total dimensions on hard surfaces. - -

    Air Conditioning System
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Engine
    Engine Model - - Cat C32B Cat® C3.6
    Gross Power - - 907 HP -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP -
    Rated Speed - - 1750 r/min -
    Bore - - 5.7 in -
    Stroke - - 6.4 in -
    Displacement - - 1958 in² 220 in³
    Peak Torque - 1,200 rpm - - 3139 lb/ft -
    Torque Rise - - 30 % -
    Note (1) - - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) - - Net torque rise meets SAE J139. All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) - - No engine derating required up to 3050 m (10,000 ft) altitude. -
    Power - Net - - - 92 HP
    Net Power - 2,200 rpm - SAE J1349 - - - 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 92 HP
    Power Train - - - Hydrostatic

    Brakes
    Brakes - - Meets ISO 3540:2011 -

    Operating Specifications
    Operating Weight - - 224647 lb -

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was -

    Cab
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards -
    FOPS - - - ISO 3449:2005 Level II
    ROPS - - - ISO 3471:2008

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in
    Overall Width - - - 67.3 in
    Maximum Reach - Ground Line - - - 30.2 in

    Dimensions
    Length of Basic Dozer (without blade) - LGP - - - 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 79.1 in
    Dozer Height - LGP - - - 108.9 in
    Dozer Height - Standard - - - 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Length of Basic Dozer (without blade) - Standard - - - 129.5 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    BLADE: Blade Lift Height - LGP - - - 27.9 in
    BLADE: Blade Width - LGP - - - 124 in
    BLADE: Blade Width at Maximum Angle - LGP - - - 113.1 in
    Track Gauge - LGP - - - 67.9 in
    Ground Clearance - LGP - - - 13 in
    BLADE: Blade Height - LGP - - - 35.8 in
    Overall Length - With Blade - LGP - - - 168.2 in
    BLADE: Blade Capacity (SAE) - LGP - - - 2.42 yd³
    BLADE: Maximum Tilt - LGP - - - 17.2 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 168.5 in
    Note - - - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Maximum Tilt - Standard - - - 15.2 in
    Track Gauge - Standard - - - 61 in
    BLADE: Digging Depth - Standard - - - 23.3 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Lift Height - Standard - - - 29.3 in
    BLADE: Blade Capacity (SAE) - Standard - - - 2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard - - - 100.1 in
    BLADE: Blade Height - Standard - - - 39.8 in

    Retrieval Winch
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Weight - - - 1747 lb
    Drum Capacity - Optional Cable - - - 195 ft
    Rope Diameter - Recommended - - - 0.63 in
    Winch Drive - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Recommended Cable - - - 277 ft
    Maximum Line Pull - Full Drum - - - 20350 lb
    Speed - - - Variable
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Drum Diameter - - - 8 in
    Winch Length - - - 35.63 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Maximum line pull – bare drum - - - 40000 lb
    Drum capacity – recommended cable - - - 371 ft
    Winch length - - - 27.76 in
    Overall width - - - 29.2 in
    Control - - - Hydraulic
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line speed – full drum - - - 207 ft/min
    Drum width - - - 10.8 in
    Drum capacity – optional - - - 256 ft
    Throat clearance - - - 6.75 in
    Weight - - - 1345 lb
    Rope diameter – recommended - - - 0.63 in
    Speed - - - Variable
    Maximum line pull – full drum - - - 25000 lb
    Drum diameter - - - 10 in
    Rope diameter – optional - - - 0.75 in
    Winch drive - - - Hydrostatic
    Add a Similar Product: