CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    814 Wheel Dozer
    View Product
    D9 Dozer
    View Product Remove
    834 Wheel Dozer
    View Product Remove
    844 Wheel Dozer
    View Product Remove

    Engine - Tier 4 Final/EU Stage V
    Engine Model Cat C7.1 - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Net Power (ISO 9249:2007) 249 HP - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - - -
    Rated Speed 2200 r/min - - -
    Gross Power (SAE J1995:2014) 284 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 902 lb/ft - - -
    Torque Rise 52% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -
    Low Idle Speed 800 r/min - - -
    Maximum Altitude without Derating 9842.5 ft - - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight 48526 lb - - -

    Scoops
    Chip Scoop Doze Capacity 37.9 yd³ - 70 yd³ -
    Chip Scoop Carry Capacity 19 yd³ - 35 yd³ -
    Coal Scoop Carry Capacity - - 30 yd³ -
    Coal Scoop Doze Capacity - - 60 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model Cat C7.1 - - -
    Emissions Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - - -
    Rated Speed 2200 r/min - - -
    Net Power (SAE J1349:2011) 249 HP - - -
    Gross Power (SAE J1995:2014) 286 HP - - -
    Engine Power (ISO 14396:2002) 275 HP - - -
    Peak Torque - 1,400 rpm 749 lb/ft - - -
    Torque Rise 26% - - -
    Bore 4.1 in - - -
    Stroke 5.3 in - - -
    Displacement 427.8 in³ - - -
    High Idle Speed 2270 r/min - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight 47887 lb - - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight 52280 lb - - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight 51639 lb - - -

    Transmission
    Transmission Type Cat Planetary Power Shift - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 3.7 mile/h - 4.2 mile/h -
    Forward - 2 6.5 mile/h - 7.2 mile/h -
    Forward - 3 11.2 mile/h - 12.6 mile/h -
    Forward - 4 19.4 mile/h - 22 mile/h -
    Reverse - 1 4.2 mile/h - 4.2 mile/h -
    Reverse - 2 7.3 mile/h - 7.6 mile/h -
    Reverse - 3 12.8 mile/h - 13.3 mile/h -
    Reverse - 4 22.1 mile/h - - -
    1.0 Forward - 2.2 mile/h - -
    2.0 Forward - 3.9 mile/h - -
    3.0 Forward - 6.8 mile/h - -
    1.0 Reverse - 2.7 mile/h - -
    2.0 Reverse - 4.8 mile/h - -
    3.0 Reverse - 8.4 mile/h - -
    Type - Planetary powershift - -
    Direct Drive - Forward 1 - - Lock-up disabled Lock-up disabled
    Direct Drive - Forward 2 - - 7.7 mile/h 8.5 mile/h
    Direct Drive - Forward 3 - - 13.7 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - - 23.9 mile/h -
    Direct Drive - Reverse 1 - - 4.5 mile/h 5.4 mile/h
    Direct Drive - Reverse 2 - - 8.1 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - - 14.3 mile/h 16.4 mile/h
    Converter Drive - Forward 1 - - - 4.5 mile/h
    Converter Drive - Forward 2 - - - 8.3 mile/h
    Converter Drive - Forward 3 - - - 14.2 mile/h
    Converter Drive - Reverse 1 - - - 4.9 mile/h
    Converter Drive - Reverse 2 - - - 9.1 mile/h
    Converter Drive - Reverse 3 - - - 15.5 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH - Pilot operated LS valve with EH -
    Lift/Tilt System Variable displacement piston - Variable displacement piston -
    Maximum Flow at 2,200 rpm 23.5 gal/min - - -
    Relief Valve Setting - Lift/Tilt 3190 psi - 4641 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 915 mm (4.7 in × 36.0 in) - 139.75 mm × 1021 mm (5.5 in × 40.2 in) 133 mm × 1535 mm (5.25 in × 60.4 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 101.6 mm × 234 mm (4.0 in × 9.2 in) - 140 mm × 230 mm (5.5 in × 9.1 in) -
    Pilot System Open center, fixed displacement gear - Variable displacement piston -
    Pilot Relief Valve Setting 3046 psi - 580 psi -
    Maximum Flow at 1,900 rpm - - 153 gal/min -
    Pilot Maximum Flow - - 13.7 gal/min -
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - - - 82 gal/min
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - - 210 mm × 188 mm (8.25 in × 7.4 in)
    Relief Valve Setting - Bulldozer (Large Pump) - - - 2700 psi
    Relief Valve Setting - Tilt Cylinders (Small Pump) - - - 2920 psi

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - Pilot, load sensing Pilot, load sensing
    Steering System - Pump Variable displacement piston - Piston, variable displacement Piston, variable displacement
    Maximum Flow at 2,200 rpm 38.8 gal/min - - -
    Relief Valve Setting - Steering 4003 psi - 3495 psi -
    Total Steering Angle 72° - 86 ° 35 °
    Steering Cycle Times - High Idle 3 s - 3.1 s -
    Steering Cycle Times - Low Idle 8.2 s - 5.7 s -
    Maximum Flow - - 65.8 gal/min 94.3 gal/min
    Minimum Turning Radius - Over Blade - - - 34 ft
    Relief Valve Setting - - - 4500 psi

    Service Refill Capacities
    Fuel Tank 132.1 gal (US) - 209.5 gal (US) -
    Diesel Exhaust Fluid Tank 4.2 gal (US) - 8.7 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V 21.4 gal (US) - - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA 19.3 gal (US) - - -
    Engine Crankcase 5.3 gal (US) - - -
    Transmission 13.2 gal (US) - 31.7 gal (US) 29.1 gal (US)
    Differential - Final Drives - Front 17.2 gal (US) - 49.1 gal (US) 71.6 gal (US)
    Differential - Final Drives - Rear 17.2 gal (US) - 49.1 gal (US) 68.9 gal (US)
    Hydraulic System - Implement/Steering 34.1 gal (US) - - -
    Hydraulic Tank Only 19.8 gal (US) - - -
    Cooling System - - 31.7 gal (US) 54.9 gal (US)
    Crankcase - - 15.9 gal (US) 20 gal (US)
    Hydraulic System Factory Fill - - 63.4 gal (US) -
    Hydraulic System - Tank Only - - 37 gal (US) -
    Fuel Tank - Standard - - - 286.6 gal (US)
    Hydraulic System - Implement and Hydraulic Fan - - - 68.9 gal (US)
    Hydraulic System - Steering and Braking - - - 34.9 gal (US)

    Axles
    Front Planetary – Fixed - Fixed Fixed
    Rear Planetary – Oscillating - Trunnion Trunnion
    Oscillation Angle ±10° - ±13° 8.5 °

    Braking System
    Service Brakes Single Disc Wet (enclosed) 4 WHL - - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - - -

    Dimensions (Approximate)
    Height to Top of Beacon 13.1 ft - - -
    Height - Top of Cab 12.1 ft - - -
    Height - Top of Exhaust Pipe 11.3 ft - - 16.6 ft
    Height - Top of Hood 8.7 ft - - 12.7 ft
    Height to Top of Radiator Guard 8 ft - - -
    Ground Clearance to Hitch 1.4 ft - - -
    Ground Clearance to Transmission Guard 1.4 ft - - -
    Ground Clearance to Bottom of Bumper 2.3 ft - - -
    Centerline of Rear Axle to Bumper 6.5 ft - - -
    Centerline of Front Axle to Hitch 5.5 ft - - 7.5 ft
    Wheel Base 11 ft - - 15.1 ft
    Width over Platform 10.3 ft - - -
    Overall Length to Front Tire 21 ft - - -
    Overall Machine Length with Straight Blade 23.6 ft - - -
    Overall Machine Length with Coal Blade 25.5 ft - - -
    Ground Clearance* - 18.1 in - -
    Track Gauge - 88.6 in - -
    Width - Without Trunnions - Standard Shoe - 113 in - -
    Width - Over Trunnions - 130.3 in - -
    Height - FOPS Cab* - 150.4 in - -
    Height - Top of Stack* - 152.6 in - -
    Height - ROPS/Canopy* - 157.5 in - -
    Drawbar Height (Center of Clevis)* - 30 in - -
    Length - Track on Ground - 136.6 in - -
    Overall Length - Basic Tractor - 193.3 in - -
    Length - Basic Tractor - With Drawbar - 206.4 in - -
    Length - Basic Tractor - With Winch - 218.3 in - -
    Length - With SU-Blade** - 259.9 in - -
    Length - With U-Blade - 274.3 in - -
    Length - With Single-Shank Ripper - 257 in - -
    Length - With Multi-Shank Ripper - 257.4 in - -
    Overall Length - SU-Blade/SS Ripper - 323.6 in - -
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. - -
    Height - Top of ROPS - - - 17.2 ft
    Ground Clearance - - - 2 ft
    Centerline of Rear Axle to Edge of Bumper - - - 12.5 ft
    Length - With Blade on Ground - - - 36.5 ft

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - 72 dB(A) -
    Machine Sound Level (ISO 6395) 111 dB(A) - 113 dB(A) -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A) - - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - 72 dB(A) -
    Machine Sound Level (ISO 6395) 109 dB(A) - 109 dB(A) -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 112 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) 70 dB(A) - - -
    Machine Sound Level (ISO 6395) 110 dB(A) - - -
    Note (1) The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (2) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -
    Note (3) The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level uncertainty is ± 2 dB(A). - - -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 - 452 HP - -
    Bore - 5.7 in³ - -
    Stroke - 7.2 in - -
    Displacement - 1106 in³ - -
    Engine Power - Gross SAE J1995 - 487 HP - -
    Engine Power - ISO 14396 - 479 HP - -
    Emissions - U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) - All engine ratings apply at 1,750 rpm. - -
    Note (2) - No derating required up to 4267 m (14,000 ft) altitude. - -

    Weights
    Operating Weight - 110225 lb - -
    Shipping Weight - 84373 lb - -
    Note (1) - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. - -
    Note (2) - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. - -

    Undercarriage
    Shoe Type - Extreme Service - -
    Width - Shoe - 24 in - -
    Shoes/Side - 43 - -
    Grouser Height - 3.3 in - -
    Pitch - 9.4 in - -
    Ground Clearance - 18.1 in - -
    Track Gauge - 88.6 in - -
    Length - Track on Ground - 136.6 in - -
    Ground Contact Area - 45.6 ft² - -
    Track Rollers/Side - 8 - -
    Number of Carrier Rollers - 1 per side (optional) - -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - -
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - -
    Sound - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - -
    Sound (1) - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c - -
    Sound (2) - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - -

    Steering and Brakes
    Steering Type - Differential - -
    Brake Type - Spring Applied Wet Disc - -
    Brake Diameter - 15.5 in - -
    Brake Count - 8 - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C18 - -
    Bore - 5.7 in³ - -
    Stroke - 7.2 in³ - -
    Displacement - 1106 in³ - -
    Engine Power - Gross SAE J1995 - 477 HP - -
    Engine Power - ISO 14396 - 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - 440 HP - -
    Emissions - U.S. EPA Tier 4 / EU Stage V - -
    Note (1) - All Engine ratings apply at 1,750 rpm. - -
    Note (2) - No derating required up to 2499 m (8,200 ft). - -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - 254 gal (US) - -
    DEF Tank (Tier 4 only) - 9.5 gal (US) - -
    Fuel Tank (Fast Fill) - 248 gal (US) - -
    Cooling System - 21 gal (US) - -
    Engine Crankcase* - 10 gal (US) - -
    Powertrain - 40 gal (US) - -
    Final Drives (each) - 4 gal (US) - -
    Roller Frames (each) - 12 gal (US) - -
    Pivot Shaft Oil - 8 gal (US) - -
    Hydraulic System Tank - 24 gal (US) - -
    Note - *With oil filters. - -
    Note 2 - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -

    Hydraulic Controls
    Pump Type - Piston-type geared to flywheel - -
    Pump Output - Steering - 96 gal/min - -
    Fan Pump - 21 gal/min - -
    Tilt Cylinder Flow - Rod End Flow - 53 gal/min - -
    Tilt Cylinder Flow - Head End Flow - 53 gal/min - -
    Lift Cylinder Relief Valve Setting - 3800 lbf/in - -
    Tilt Cylinder Relief Valve Setting - 2799 psi - -
    Ripper - Lift - Relief Valve Setting - 3800 psi - -
    Ripper - Pitch - Relief Valve Setting - 3800 psi - -
    Steering System - Pressure - 5874 psi - -
    Tank Capacity - 24 gal/min - -
    Note (1) - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - -
    Note (2) - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - -
    Note (3) - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - 17.8 yd³ - -
    Blade Width (over end bits) - 171.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 37 in - -
    Blade Weight - 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 110205 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) - 21.7 yd³ - -
    Blade Width (over end bits) - 184.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 39.9 in - -
    Blade Weight - 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 111362 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 35520 lbf - -
    Maximum penetration depth (standard tip) - 48.5 in - -
    Pryout Force - 74637 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.7 in - -
    Number of Pockets - 1 - -
    Weight - 10701 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) - 110205 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 38667 lbf - -
    Maximum penetration depth (standard tip) - 68 in - -
    Pryout Force - 74412 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 32.2 in - -
    Number of Pockets - 1 - -
    Weight - 10981 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) - 110485 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - 34621 lbf - -
    Maximum Penetration - Standard Tip - 31.4 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 81156 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.6 in - -
    Number of Pockets - 3 - -
    Weight - 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper - 111739 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Winches
    Winch Model - PA 140VS - -
    Weight* - 3950 lb - -
    Oil Capacity - 4 gal (US) - -
    Drum Width - 12.6 in - -
    Wire Cable Diameter - Recommended - 1.13 in - -
    Wire Cable Diameter - Optional - 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length - 257 in - -
    Maximum Drum Capacity - Optional Cable Length - 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter - 2.4 in - -
    Wire Cable Ferrule Size - Length - 2.8 in - -
    Note - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Engine
    Engine Model - - Cat® C18 C27 Cat®
    Rated Speed - - 1900 r/min 1800 r/min
    Peak Power Speed - - 1500 r/min -
    Gross Power - SAE J1995 - - 562 HP 766 HP
    Net Power - SAE J1349 - - 496 HP -
    Bore - - 5.7 in 5.4 in
    Stroke - - 7.2 in 6 in
    Displacement - - 1105 in³ 1649.5 in³
    Peak Torque - 1,300 rpm - - 2092 lb/ft -
    Torque Rise - - 52 % 18 %
    Emissions - - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2
    Gross Power - ISO 14396 - - - 752 HP
    Net Power - SAE J1349 - Standard Ambient - - - 699 HP
    Net Power - SAE J1349 - High Ambient - - - 648 HP
    Peak Torque - Speed - - - 2624 lb/ft

    Operating Specifications
    Operating Weight - - 105271 lb 165089 lb
    Blade Capacities - - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) 15.9 - 30.7 m3 (20.7 - 40.2 yd3)
    Coal Scoop Operating Weight - - 112428 lb -
    Chip Scoop Operating Weight - - 112838 lb -

    Brakes
    Brakes - - ISO 3450: 2011 Meets ISO 3540:2011

    Dimensions
    Height - Top of Exhaust Stack - - 15.9 ft -
    Height - Top of Air Cleaner - - 12.8 ft -
    Height - Top of Hood - - 10.9 ft -
    Ground Clearance - Bumper - - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - - 10.5 ft -
    Wheel Base - - 14.9 ft -
    Length - Front of Tire - - 28.4 ft -
    Length - Straight Blade on Ground - - 32.6 ft -
    Centerline of Front Axle to Hitch - - 7.5 ft -
    Length - Universal Blade on Ground - - 34.4 ft -
    Ground Clearance - - 1.7 ft -
    Height - Top of Cab - - 13.7 ft -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 115 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 113 dB(A)

    Cab
    ROPS/FOPS - - - ISO 3471:2008 and ISO 3449:2005 Level II Standards
    Add a Similar Product: