Compare Equipment Go Back
 745 Bare Chassis Articulated Truck |
 730 Bare Chassis Articulated Truck |
 725 Bare Chassis Articulated Truck |
|
Wheel Base Length |
|||
|---|---|---|---|
| Standard Wheel Base | 180.7 in | 156.7 in | 156.7 in |
| Long Wheel Base | 228.4 in | 215.2 in | - |
Weights |
|||
| Rated Payload | 55 ton (US) | 38.9 ton (US) | 30.4 ton (US) |
Engine |
|||
| Engine Model | Cat® C18 | Cat® C13 | Cat® C9.3 |
| Bore | 5.7 in | 5.1 in | 4.5 in |
| Stroke | 7.2 in | 6.2 in | 45.2 in |
| Displacement | 1106 in³ | 762.8 in³ | 567.5 in³ |
| Gross Power - SAE J1995 | 511 HP | 375 HP | 342 HP |
| Net Power - SAE J1349 | 496 HP | 367 HP | 334 HP |
| Peak Engine Torque Net (SAE J1349) | 1887 lb/ft | 1554 ft·lbf | 1263 ft·lbf |
| Peak Engine Torque Gross (SAE J1995) | 1931 lb/ft | 1579 lb/ft | 1275 lb/ft |
| Net Power - ISO 14396 | 447 HP | 370 HP | 338 HP |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
| No Engine De-rating Required Below | 10000 ft | 12500 ft | 3000 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat® C18 | - | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | - | Cat® C13 | Cat® C9.3 |
Transmission |
|||
| Forward - 1 | 3.8 mile/h | 5 mile/h | 5 mile/h |
| Forward - 2 | 5 mile/h | 9 mile/h | 9.4 mile/h |
| Forward - 3 | 7 mile/h | 14 mile/h | 14.4 mile/h |
| Forward - 4 | 8.8 mile/h | 21 mile/h | 22.1 mile/h |
| Forward - 5 | 11.6 mile/h | 29 mile/h | 30.7 mile/h |
| Forward - 6 | 14.2 mile/h | 34 mile/h | 36.3 mile/h |
| Forward - 7 | 19.6 mile/h | - | - |
| Forward - 8 | 23.5 mile/h | - | - |
| Forward - 9 | 34 mile/h | - | - |
| Reverse - 1 | 4 mile/h | 6 mile/h | 5.5 mile/h |
| Reverse - 2 | 9.1 mile/h | - | - |
Service Refill Capacities |
|||
| Fuel Tank | 145.3 gal (US) | 108.8 gal (US) | 91 gal (US) |
| DEF Tank | 5.3 gal (US) | 5.3 gal (US) | 4 gal (US) |
| Cooling System | 23.7 gal (US) | 21.9 gal (US) | 18 gal (US) |
| Brake Cooling Tank | 17.7 gal (US) | - | - |
| Steering/Hoist Hydraulic System | 36.9 gal (US) | - | - |
| Engine Crankcase | 13.7 gal (US) | 10 gal (US) | 8 gal (US) |
| Transmission - OTG | 19.8 gal (US) | - | - |
| Final Drive - Each | 1.3 gal (US) | - | 1.6 gal (US) |
| Axles - Each | 15.8 gal (US) | - | - |
| Final Drives/Differential | 33 gal (US) | 33 gal (US) | 33 gal (US) |
| Hydraulic System | - | 29.1 gal (US) | 24 gal (US) |
| Transmission | - | 12.4 gal (US) | 10 gal (US) |
| Output Transfer Gear Box | - | 6.3 gal (US) | 5 gal (US) |
Sound Levels |
|||
| Interior Cab | 72 dB(A) | 72 dB(A) | - |
Standards |
|||
| Brakes | ISO 3450:2011 | ISO 3450:2011 | ISO 3450:2011 |
| Cab - FOPS | ISO 3449:2005 Level II | ISO 3449:2005 Level II | ISO 3449:2005 Level II |
| Cab - ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471:2008 |
| Steering | ISO 5010:2019 | ISO 5010:2019 | ISO 5010:2019 |
Steering |
|||
| Lock to Lock | 4.8 seconds at 60 rpm | 4.75 seconds @ 60 rpm | 4.75 seconds at 60 rpm |
Turning Circle |
|||
| Turning Dimensions - Clearance Radius | 356 in | 318 in | 318 in |
| Turning Dimensions - Steer Angle - Left/Right | 45° | 45 ° | 45 ° |
| Turning Dimensions - SAE Turning Radius | 340 in | 294 in | 294 in |
| Turning Dimensions - Inside Radius | 174 in | 153 in | 153 in |
| Turning Dimensions - Aisle Width | 233 in | 210 in | 210 in |
| Note | Dimensions are for machines equipped with 29.5 R25 tires. | Dimensions are for machines equipped with 23.5 R25 tires. | Dimensions are for machines equipped with 23.5R25 tires. |
