CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    745 Bare Chassis Articulated Truck
    View Product
    730 EJ Articulated Truck
    View Product Remove
    725 Bare Chassis Articulated Truck
    View Product Remove
    740 EJ Articulated Truck
    View Product Remove

    Wheel Base Length
    Standard Wheel Base 180.7 in - 156.7 in -
    Long Wheel Base 228.4 in - - -

    Weights
    Rated Payload 55 ton (US) 30 ton (US) 30.4 ton (US) 42 ton (US)

    Engine
    Engine Model Cat® C18 Cat® C13 Cat® C9.3 Cat® C18
    Bore 5.7 in 5.1 in 4.5 in 5.7 in
    Stroke 7.2 in 6.2 in 45.2 in 7.2 in
    Displacement 1106 in³ 763 in³ 567.5 in³ 1106 in³
    Gross Power - SAE J1995 511 HP 375 HP 342 HP 511 HP
    Net Power - SAE J1349 496 HP 367 HP 334 HP 496 HP
    Peak Engine Torque Net (SAE J1349) 1887 lb/ft - 1263 ft·lbf 1887 ft·lbf
    Peak Engine Torque Gross (SAE J1995) 1931 lb/ft 1579 ft·lbf 1275 lb/ft 1931 ft·lbf
    Net Power - ISO 14396 447 HP 370 HP 338 HP 504 HP
    Peak Engine Torque Speed 1200 r/min 1200 r/min 1200 r/min 1200 r/min
    No Engine De-rating Required Below 10000 ft - 3000 ft 10000 ft
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final Cat® C18 - - -
    Emissions - The 730 EJ meets Tier 4 Final and Stage V emission standards. - The 740 EJ meets Tier 4 Final and Stage V emission standards.
    Note (4) - Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
    Note (3) - The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
    Note (2) - The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. - The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Note (1) - The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. - The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
    Note (5) - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio - -
    Peak Engine Torque Net (ISO 14396) - 1564 ft·lbf - -
    No Engine De-rating Below - 12500 ft - -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V - Cat C13 - -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV - - Cat® C9.3 -
    Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final - - - Cat C18

    Transmission
    Forward - 1 3.8 mile/h 5 mile/h 5 mile/h 3.8 mile/h
    Forward - 2 5 mile/h 9 mile/h 9.4 mile/h 5 mile/h
    Forward - 3 7 mile/h 14 mile/h 14.4 mile/h 7 mile/h
    Forward - 4 8.8 mile/h 21 mile/h 22.1 mile/h 8.8 mile/h
    Forward - 5 11.6 mile/h 29 mile/h 30.7 mile/h 11.6 mile/h
    Forward - 6 14.2 mile/h 34 mile/h 36.3 mile/h 14.2 mile/h
    Forward - 7 19.6 mile/h - - 19.6 mile/h
    Forward - 8 23.5 mile/h - - 23.5 mile/h
    Forward - 9 34 mile/h - - 34 mile/h
    Reverse - 1 4 mile/h 6 mile/h 5.5 mile/h 4 mile/h
    Reverse - 2 9.1 mile/h - - 9.1 mile/h

    Service Refill Capacities
    Fuel Tank 145.3 gal (US) 108.8 gal (US) 91 gal (US) 145.3 gal (US)
    DEF Tank 5.3 gal (US) 5.3 gal (US) 4 gal (US) 5.3 gal (US)
    Cooling System 23.7 gal (US) 21.9 gal (US) 18 gal (US) 23.7 gal (US)
    Brake Cooling Tank 17.7 gal (US) - - 17.7 gal (US)
    Steering/Hoist Hydraulic System 36.9 gal (US) - - 36.9 gal (US)
    Engine Crankcase 13.7 gal (US) 10 gal (US) 8 gal (US) 13.7 gal (US)
    Transmission - OTG 19.8 gal (US) - - 19.8 gal (US)
    Final Drive - Each 1.3 gal (US) - 1.6 gal (US) 1.3 gal (US)
    Axles - Each 15.8 gal (US) - - 15.8 gal (US)
    Final Drives/Differential 33 gal (US) 33 gal (US) 33 gal (US) -
    Hydraulic System - 29.1 gal (US) 24 gal (US) -
    Transmission - 12.4 gal (US) 10 gal (US) -
    Output Transfer Gear Box - 6.3 gal (US) 5 gal (US) -

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) - 72 dB(A)
    Note (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Note (1) - The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the - The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

    Standards
    Brakes ISO 3450:2011 ISO 3450 – 2011 ISO 3450:2011 ISO 3450 – 2011
    Cab - FOPS ISO 3449:2005 Level II ISO 3449 Level II – 2005 ISO 3449:2005 Level II ISO 3449 Level II – 2005
    Cab - ROPS ISO 3471:2008 ISO 3471 – 2008 ISO 3471:2008 ISO 3471 – 2008
    Steering ISO 5010:2019 ISO 5010 – 2007 ISO 5010:2019 ISO 5010 – 2007

    Steering
    Lock to Lock 4.8 seconds at 60 rpm 4.75 seconds @ 60 rpm 4.75 seconds at 60 rpm 4.8 seconds @ 60 rpm

    Turning Circle
    Turning Dimensions - Clearance Radius 356 in 318 in 318 in 356 in
    Turning Dimensions - Steer Angle - Left/Right 45° 45° 45 ° 45 deg
    Turning Dimensions - SAE Turning Radius 340 in 294 in 294 in 339 in
    Turning Dimensions - Inside Radius 174 in 152 in 153 in 173 in
    Turning Dimensions - Aisle Width 233 in 214 in 210 in 233 in
    Note Dimensions are for machines equipped with 29.5 R25 tires. Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 29.5R25 tires.

    Body Capacities
    Heaped (SAE 2:1) - 22.1 yd³ - 30.1 yd³
    Struck - 17.7 yd³ - 23.5 yd³

    Operating Weights
    Front Axle - Rated Load - 1433 lb - 3534 lb
    Total - Loaded - 117528 lb - 162399 lb
    Center Axle - Loaded - 41502 lb - 57214 lb
    Rear Axle - Empty - 11707 lb - 16515 lb
    Rear Axle - Rated Load - 29156 lb - 40120 lb
    Front Axle - Loaded - 35009 lb - 48548 lb
    Center Axle - Empty - 12214 lb - 17095 lb
    Total - Rated Load - 59745 lb - 83776 lb
    Front Axle - Empty - 34723 lb - 44849 lb
    Total - Empty - 58643 lb - 78623 lb
    Rear Axle - Loaded - 41017 lb - 56637 lb
    Center Axle - Rated Load - 29156 lb - 40120 lb

    Body Plate
    Type - High strength Brinell HB450 wear resistant steel - High Strength Brinell HB450 Wear Resistant Steel
    Chute - - - 0.55 in
    Front - - - 0.28 in
    Side - - - 0.43 in
    Base - - - 0.55 in

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavators: 336F/336F XE - Passes - 5–6 - -
    Note - An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas - An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
    Hydraulic Excavators: 349F/349F XE - Passes - 4–5 - -
    Wheel Loaders: 966M/966M XE - Passes - 4 - -
    Wheel Loaders: 972M/972M XE - Passes - 3–4 - -
    Wheel Loader: 962M - Passes - 4–5 - -
    Wheel Loader: 950M - Passes - 5 - -
    Wheel Loader: 972 - Passes - - - 4–5
    Wheel Loader: 982 - Passes - - - 4
    Hydraulic Excavator: 374 - Passes - - - 5
    Hydraulic Excavator: 390 - Passes - - - 4
    Wheel Loader: 980 - Passes - - - 4–5

    Eject/Retract Times
    Retract Time - 15 s - -
    Eject Time - 12 s - -

    Blade Eject/Retract
    Retract (manual) - - - 21 s
    Eject (manual) - - - 17 s
    Eject (automatic) - - - 16 s
    Retract (automatic) - - - 21 s
    Add a Similar Product:
    • 745 Articulated Truck Add
    • 740 GC Articulated Truck Add
    • 735 Articulated Truck Add
    • 730 Articulated Truck Add
    • 725 Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add