Compare Equipment Go Back
735 Bare Chassis Articulated Truck |
745 Articulated Truck |
740 EJ Articulated Truck |
|
Wheel Base Length |
|||
---|---|---|---|
Standard Wheel Base | 156.7 in | - | - |
Long Wheel Base | 215.2 in | - | - |
Weights |
|||
Rated Payload | 43.1 ton (US) | 45.2 t | 42 ton (US) |
Engine |
|||
Engine Model | Cat® C13 | Cat C18 | Cat® C18 |
Bore | 5.1 in | 5.7 in | 5.7 in |
Stroke | 6.2 in | 7.2 in | 7.2 in |
Displacement | 736 in³ | 1106 in³ | 1106 in³ |
Gross Power - SAE J1995 | 434 HP | 511 HP | 511 HP |
Net Power - SAE J1349 | 424 HP | 496 HP | 496 HP |
Peak Engine Torque Gross (SAE J1995) | 1614 lb/ft | 1931 ft·lbf | 1931 ft·lbf |
Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
Peak Engine Torque Net (SAE J1349) | 1597 lb/ft | 1887 ft·lbf | 1887 ft·lbf |
Net Power - ISO 14396 | 447 HP | 504 HP | 504 HP |
No Engine De-rating Required Below | 12500 ft | 10000 ft | 10000 ft |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat® C13 | - | - |
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final | - | Cat® C18 | Cat C18 |
Note (4) | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
Note (1) | - | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Note (2) | - | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (3) | - | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
Emissions | - | The 745 meets Tier 4 Final and Stage V emission standards. | The 740 EJ meets Tier 4 Final and Stage V emission standards. |
Transmission |
|||
Forward - 1 | 5 mile/h | 3.8 mile/h | 3.8 mile/h |
Forward - 2 | 9 mile/h | 5 mile/h | 5 mile/h |
Forward - 3 | 14 mile/h | 7 mile/h | 7 mile/h |
Forward - 4 | 22 mile/h | 8.8 mile/h | 8.8 mile/h |
Forward - 5 | 30 mile/h | 11.6 mile/h | 11.6 mile/h |
Forward - 6 | 35 mile/h | 14.2 mile/h | 14.2 mile/h |
Reverse - 1 | 6 mile/h | 4 mile/h | 4 mile/h |
Forward - 7 | - | 19.6 mile/h | 19.6 mile/h |
Forward - 8 | - | 23.5 mile/h | 23.5 mile/h |
Reverse - 2 | - | 9.1 mile/h | 9.1 mile/h |
Forward - 9 | - | 34 mile/h | 34 mile/h |
Service Refill Capacities |
|||
Fuel Tank | 108.8 gal (US) | 145.3 gal (US) | 145.3 gal (US) |
Cooling System | 21.9 gal (US) | 23.7 gal (US) | 23.7 gal (US) |
Hydraulic System | 29.1 gal (US) | - | - |
Engine Crankcase | 10 gal (US) | 13.7 gal (US) | 13.7 gal (US) |
Transmission | 12.3 gal (US) | - | - |
Final Drives/Differential | 33 gal (US) | - | - |
Output Transfer Gear Box | 5.5 gal (US) | - | - |
DEF Tank | 5.3 gal (US) | 5.3 gal (US) | 5.3 gal (US) |
Steering/Hoist Hydraulic System | - | 36.9 gal (US) | 36.9 gal (US) |
Transmission - OTG | - | 19.8 gal (US) | 19.8 gal (US) |
Final Drive - Each | - | 1.3 gal (US) | 1.3 gal (US) |
Axles - Each | - | 15.8 gal (US) | 15.8 gal (US) |
Brake Cooling Tank | - | 17.69 gal (US) | 17.7 gal (US) |
Sound Levels |
|||
Interior Cab | 72 dB(A) | 72 dB(A) | 72 dB(A) |
Note (1) | - | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
Note (2) | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Standards |
|||
Brakes | ISO 3450:2011 | ISO 3450 – 2011 | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449:2005 Level II | ISO 3449 Level II – 2005 | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471:2008 | ISO 3471 – 2008 | ISO 3471 – 2008 |
Steering | ISO 5010:2019 | ISO 5010 – 2007 | ISO 5010 – 2007 |
Steering |
|||
Lock to Lock | 4.75 seconds at 60 rpm | 4.8 seconds @ 60 rpm | 4.8 seconds @ 60 rpm |
Turning Circle |
|||
Turning Dimensions - SAE Turning Radius | 294 in | 340 in | 339 in |
Turning Dimensions - Inside Radius | 149 in | 174 in | 173 in |
Turning Dimensions - Aisle Width | 212 in | 233 in | 233 in |
Turning Dimensions - Clearance Radius | 318 in | 356 in | 356 in |
Turning Dimensions - Steer Angle - Left/Right | 45° | 45 deg | 45 deg |
Note | Dimensions are for machines equipped with 750/65 R25 tires. | Dimensions are for machines equipped with 29.5R25 tires. | Dimensions are for machines equipped with 29.5R25 tires. |
Body Capacities |
|||
Heaped (SAE 2:1) | - | 32.7 yd³ | 30.1 yd³ |
Struck | - | 24.2 yd³ | 23.5 yd³ |
Tailgate Heaped SAE 2:1 | - | 34.7 yd³ | - |
Tailgate Struck | - | 25.5 yd³ | - |
Operating Weights |
|||
Rear Axle - Rated Load | - | 38691 lb | 40120 lb |
Front Axle - Empty | - | 43515 lb | 44849 lb |
Total - Loaded | - | 163942 lb | 162399 lb |
Rear Axle - Empty | - | 14731 lb | 16515 lb |
Rear Axle - Loaded | - | 53422 lb | 56637 lb |
Total - Rated Load | - | 90390 lb | 83776 lb |
Front Axle - Rated Load | - | 13007 lb | 3534 lb |
Center Axle - Rated Load | - | 38691 lb | 40120 lb |
Total - Empty | - | 73553 lb | 78623 lb |
Front Axle - Loaded | - | 56522 lb | 48548 lb |
Center Axle - Loaded | - | 54000 lb | 57214 lb |
Center Axle - Empty | - | 15309 lb | 17095 lb |
Body Plate |
|||
Type | - | High Strength Brinell HB450 Wear Resistant Steel | High Strength Brinell HB450 Wear Resistant Steel |
Base | - | 0.55 in | 0.55 in |
Chute | - | 0.55 in | 0.55 in |
Side | - | 0.43 in | 0.43 in |
Front | - | 0.28 in | 0.28 in |
Body Hoist |
|||
Raise (automatic) | - | 13 s | - |
Raise (manual) | - | 12 s | - |
Lower (automatic) | - | 10 s | - |
Lower (manual) | - | 10 s | - |
Optimal Loader/Truck Pass Matching |
|||
Hydraulic Excavator: 390 - Passes | - | 4 | 4 |
Wheel Loader: 982 - Passes | - | 4 | 4 |
Wheel Loader: 972 - Passes | - | 43926 | 4–5 |
Hydraulic Excavator: 374 - Passes | - | 5 | 5 |
Note | - | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Wheel Loader: 980 - Passes | - | 43926 | 4–5 |
Blade Eject/Retract |
|||
Retract (manual) | - | - | 21 s |
Eject (manual) | - | - | 17 s |
Eject (automatic) | - | - | 16 s |
Retract (automatic) | - | - | 21 s |
Add a Similar Product: