Compare Equipment Go Back
735 Bare Chassis Articulated Truck |
740 GC Articulated Truck |
730 Bare Chassis Articulated Truck |
|
Wheel Base Length |
|||
---|---|---|---|
Standard Wheel Base | 156.7 in | - | 156.7 in |
Long Wheel Base | 215.2 in | - | 215.2 in |
Weights |
|||
Rated Payload | 43.1 ton (US) | 40 ton (US) | 38.9 ton (US) |
Engine |
|||
Engine Model | Cat® C13 | Cat® C15 | Cat® C13 |
Bore | 5.1 in | 5.4 in | 5.1 in |
Stroke | 6.2 in | 6.75 in | 6.2 in |
Displacement | 736 in³ | 926 in³ | 762.8 in³ |
Gross Power - SAE J1995 | 434 HP | 452 HP | 375 HP |
Net Power - SAE J1349 | 424 HP | 439 HP | 367 HP |
Peak Engine Torque Gross (SAE J1995) | 1614 lb/ft | 1711 ft·lbf | 1579 lb/ft |
Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
Peak Engine Torque Net (SAE J1349) | 1597 lb/ft | 1670 ft·lbf | 1554 ft·lbf |
Net Power - ISO 14396 | 447 HP | 447 HP | 370 HP |
No Engine De-rating Required Below | 12500 ft | - | 12500 ft |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat® C13 | - | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | - | Cat C15 | - |
Emissions | - | The C15 engine meets Tier 4 Final and Stage V emission standards. | - |
Note (4) | - | Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. | - |
Note (2) | - | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. | - |
Note (3) | - | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. | - |
Note (1) | - | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. | - |
Note (5) | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. | - |
No Engine De-rating Below | - | 10000 ft | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | - | - | Cat® C13 |
Transmission |
|||
Forward - 1 | 5 mile/h | 4 mile/h | 5 mile/h |
Forward - 2 | 9 mile/h | 5.3 mile/h | 9 mile/h |
Forward - 3 | 14 mile/h | 7.3 mile/h | 14 mile/h |
Forward - 4 | 22 mile/h | 9.2 mile/h | 21 mile/h |
Forward - 5 | 30 mile/h | 12.2 mile/h | 29 mile/h |
Forward - 6 | 35 mile/h | 14.9 mile/h | 34 mile/h |
Reverse - 1 | 6 mile/h | 4.2 mile/h | 6 mile/h |
Reverse - 2 | - | 9.8 mile/h | - |
Forward - 8 | - | 24.7 mile/h | - |
Forward - 7 | - | 20.6 mile/h | - |
Forward - 9 | - | 35.7 mile/h | - |
Service Refill Capacities |
|||
Fuel Tank | 108.8 gal (US) | 145.3 gal (US) | 108.8 gal (US) |
Cooling System | 21.9 gal (US) | 23.7 gal (US) | 21.9 gal (US) |
Hydraulic System | 29.1 gal (US) | - | 29.1 gal (US) |
Engine Crankcase | 10 gal (US) | 13.7 gal (US) | 10 gal (US) |
Transmission | 12.3 gal (US) | - | 12.4 gal (US) |
Final Drives/Differential | 33 gal (US) | - | 33 gal (US) |
Output Transfer Gear Box | 5.5 gal (US) | - | 6.3 gal (US) |
DEF Tank | 5.3 gal (US) | 6.5 gal (US) | 5.3 gal (US) |
Axles - Each | - | 15.8 gal (US) | - |
Brake Cooling Tank | - | 17.7 gal (US) | - |
Transmission - OTG | - | 19.8 gal (US) | - |
Steering/Hoist Hydraulic System | - | 36.9 gal (US) | - |
Final Drive - Each | - | 1.3 gal (US) | - |
Sound Levels |
|||
Interior Cab | 72 dB(A) | 72 dB(A) | 72 dB(A) |
Note (2) | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | - |
Note (1) | - | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the | - |
Standards |
|||
Brakes | ISO 3450:2011 | ISO 3450 – 2011 | ISO 3450:2011 |
Cab - FOPS | ISO 3449:2005 Level II | ISO 3449 Level II – 2005 | ISO 3449:2005 Level II |
Cab - ROPS | ISO 3471:2008 | ISO 3471 – 2008 | ISO 3471:2008 |
Steering | ISO 5010:2019 | ISO 5010 – 2007 | ISO 5010:2019 |
Steering |
|||
Lock to Lock | 4.75 seconds at 60 rpm | 4.75 seconds @ 60 rpm | 4.75 seconds @ 60 rpm |
Turning Circle |
|||
Turning Dimensions - SAE Turning Radius | 294 in | 303 in | 294 in |
Turning Dimensions - Inside Radius | 149 in | 156 in | 153 in |
Turning Dimensions - Aisle Width | 212 in | 220 in | 210 in |
Turning Dimensions - Clearance Radius | 318 in | 330 in | 318 in |
Turning Dimensions - Steer Angle - Left/Right | 45° | 45° | 45 ° |
Note | Dimensions are for machines equipped with 750/65 R25 tires. | Dimensions are for machines equipped with 29.5 R25 tires. | Dimensions are for machines equipped with 23.5 R25 tires. |
Body Capacities |
|||
Heaped (SAE 2:1) | - | 29.7 yd³ | - |
Struck | - | 22.2 yd³ | - |
Tailgate Heaped SAE 2:1 | - | 31.9 yd³ | - |
Tailgate Struck | - | 23.4 yd³ | - |
Body Hoist |
|||
Raise Time | - | 12 s | - |
Lower Time | - | 12 s | - |
Operating Weights |
|||
Center Axle - Empty | - | 14636 lb | - |
Rear Axle - Empty | - | 14145 lb | - |
Center Axle - Rated Load | - | 37670 lb | - |
Front Axle - Empty | - | 42596 lb | - |
Total - Empty | - | 71377 lb | - |
Center Axle - Loaded | - | 51088 lb | - |
Front Axle - Loaded | - | 49723 lb | - |
Total - Rated Load | - | 80027 lb | - |
Rear Axle - Rated Load | - | 37670 lb | - |
Rear Axle - Loaded | - | 50594 lb | - |
Front Axle - Rated Load | - | 4687 lb | - |
Total - Loaded | - | 151405 lb | - |
Body Plate |
|||
Type | - | High strength Brinell HB450 wear resistant steel | - |
Body Plate Thickness |
|||
Side Plates | - | 0.43 in | - |
Base Plate | - | 0.51 in | - |
Front Plate | - | 0.28 in | - |
Optimal Loader/Truck Pass Matching |
|||
Note | - | An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased pr | - |
Wheel Loader: 972M - Passes | - | 3 | - |
Wheel Loader: 962M - Passes | - | 5 | - |
Wheel Loader: 966M - Passes | - | 4–5 | - |
Hydraulic Excavator: 374F - Passes | - | 3–4 | - |
Hydraulic Excavator: 352F - Passes | - | 5–6 | - |
Add a Similar Product: