Compare Equipment Go Back
 735 Bare Chassis Articulated Truck |
 740 GC Bare Chassis Articulated Truck |
 740 GC Articulated Truck |
|
Wheel Base Length |
|||
|---|---|---|---|
| Standard Wheel Base | 156.7 in | 162.4 in | - |
| Long Wheel Base | 215.2 in | - | - |
Weights |
|||
| Rated Payload | 43.1 ton (US) | 49.2 ton (US) | 40 ton (US) |
Engine |
|||
| Engine Model | Cat® C13 | Cat® C15 | Cat® C15 |
| Bore | 5.1 in | 5.4 in | 5.4 in |
| Stroke | 6.2 in | 6.75 in | 6.75 in |
| Displacement | 736 in³ | 926 in³ | 926 in³ |
| Gross Power - SAE J1995 | 434 HP | 452 HP | 452 HP |
| Net Power - SAE J1349 | 424 HP | 439 HP | 439 HP |
| Peak Engine Torque Gross (SAE J1995) | 1614 lb/ft | 1711 lb/ft | 1711 ft·lbf |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
| Peak Engine Torque Net (SAE J1349) | 1597 lb/ft | 1670 lb/ft | 1670 ft·lbf |
| Net Power - ISO 14396 | 447 HP | 447 HP | 447 HP |
| No Engine De-rating Required Below | 12500 ft | 10000 ft | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat® C13 | Cat® C15 | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | - | - | Cat C15 |
| Emissions | - | - | The C15 engine meets Tier 4 Final and Stage V emission standards. |
| Note (4) | - | - | Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. |
| Note (2) | - | - | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
| Note (3) | - | - | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (1) | - | - | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Note (5) | - | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| No Engine De-rating Below | - | - | 10000 ft |
Transmission |
|||
| Forward - 1 | 5 mile/h | 4 mile/h | 4 mile/h |
| Forward - 2 | 9 mile/h | 5.3 mile/h | 5.3 mile/h |
| Forward - 3 | 14 mile/h | 7.3 mile/h | 7.3 mile/h |
| Forward - 4 | 22 mile/h | 9.2 mile/h | 9.2 mile/h |
| Forward - 5 | 30 mile/h | 12.2 mile/h | 12.2 mile/h |
| Forward - 6 | 35 mile/h | 14.9 mile/h | 14.9 mile/h |
| Reverse - 1 | 6 mile/h | 4.2 mile/h | 4.2 mile/h |
| Forward - 7 | - | 20.6 mile/h | 20.6 mile/h |
| Forward - 8 | - | 24.7 mile/h | 24.7 mile/h |
| Forward - 9 | - | 35.7 mile/h | 35.7 mile/h |
| Reverse - 2 | - | 9.8 mile/h | 9.8 mile/h |
Service Refill Capacities |
|||
| Fuel Tank | 108.8 gal (US) | 143.5 gal (US) | 145.3 gal (US) |
| Cooling System | 21.9 gal (US) | 23.7 gal (US) | 23.7 gal (US) |
| Hydraulic System | 29.1 gal (US) | - | - |
| Engine Crankcase | 10 gal (US) | 13.7 gal (US) | 13.7 gal (US) |
| Transmission | 12.3 gal (US) | - | - |
| Final Drives/Differential | 33 gal (US) | - | - |
| Output Transfer Gear Box | 5.5 gal (US) | - | - |
| DEF Tank | 5.3 gal (US) | 25 gal (US) | 6.5 gal (US) |
| Brake Cooling Tank | - | 17.7 gal (US) | 17.7 gal (US) |
| Steering/Hoist Hydraulic System | - | 36.9 gal (US) | 36.9 gal (US) |
| Transmission - OTG | - | 19.8 gal (US) | 19.8 gal (US) |
| Final Drive - Each | - | 1.3 gal (US) | 1.3 gal (US) |
| Axles - Each | - | 15.8 gal (US) | 15.8 gal (US) |
Sound Levels |
|||
| Interior Cab | 72 dB(A) | 72 dB(A) | 72 dB(A) |
| Note (2) | - | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Note (1) | - | - | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
Standards |
|||
| Brakes | ISO 3450:2011 | ISO 3450:2011 | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449:2005 Level II | ISO 3449:2005 Level II | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471:2008 | ISO 3471:2008 | ISO 3471 – 2008 |
| Steering | ISO 5010:2019 | ISO 5010:2019 | ISO 5010 – 2007 |
Steering |
|||
| Lock to Lock | 4.75 seconds at 60 rpm | 4.75 seconds at 60 rpm | 4.75 seconds @ 60 rpm |
Turning Circle |
|||
| Turning Dimensions - SAE Turning Radius | 294 in | 303 in | 303 in |
| Turning Dimensions - Inside Radius | 149 in | 156 in | 156 in |
| Turning Dimensions - Aisle Width | 212 in | 220 in | 220 in |
| Turning Dimensions - Clearance Radius | 318 in | 330 in | 330 in |
| Turning Dimensions - Steer Angle - Left/Right | 45° | 45° | 45° |
| Note | Dimensions are for machines equipped with 750/65 R25 tires. | Dimensions are for machines equipped with 29.5 R25 tires. | Dimensions are for machines equipped with 29.5 R25 tires. |
Body Capacities |
|||
| Heaped (SAE 2:1) | - | - | 29.7 yd³ |
| Struck | - | - | 22.2 yd³ |
| Tailgate Heaped SAE 2:1 | - | - | 31.9 yd³ |
| Tailgate Struck | - | - | 23.4 yd³ |
Body Hoist |
|||
| Raise Time | - | - | 12 s |
| Lower Time | - | - | 12 s |
Operating Weights |
|||
| Center Axle - Empty | - | - | 14636 lb |
| Rear Axle - Empty | - | - | 14145 lb |
| Center Axle - Rated Load | - | - | 37670 lb |
| Front Axle - Empty | - | - | 42596 lb |
| Total - Empty | - | - | 71377 lb |
| Center Axle - Loaded | - | - | 51088 lb |
| Front Axle - Loaded | - | - | 49723 lb |
| Total - Rated Load | - | - | 80027 lb |
| Rear Axle - Rated Load | - | - | 37670 lb |
| Rear Axle - Loaded | - | - | 50594 lb |
| Front Axle - Rated Load | - | - | 4687 lb |
| Total - Loaded | - | - | 151405 lb |
Body Plate |
|||
| Type | - | - | High strength Brinell HB450 wear resistant steel |
Body Plate Thickness |
|||
| Side Plates | - | - | 0.43 in |
| Base Plate | - | - | 0.51 in |
| Front Plate | - | - | 0.28 in |
Optimal Loader/Truck Pass Matching |
|||
| Note | - | - | An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased pr |
| Wheel Loader: 972M - Passes | - | - | 3 |
| Wheel Loader: 962M - Passes | - | - | 5 |
| Wheel Loader: 966M - Passes | - | - | 4–5 |
| Hydraulic Excavator: 374F - Passes | - | - | 3–4 |
| Hydraulic Excavator: 352F - Passes | - | - | 5–6 |
Add a Similar Product:
