|
735 Bare Chassis Articulated Truck
|
|
|
725 Bare Chassis Articulated Truck
|
Wheel Base Length |
| Standard Wheel Base |
156.7 in |
- |
- |
156.7 in |
| Long Wheel Base |
215.2 in |
- |
- |
- |
Weights |
| Rated Payload |
43.1 ton (US) |
40 ton (US) |
26.5 ton (US) |
30.4 ton (US) |
Engine |
| Engine Model |
Cat® C13 |
Cat® C15 |
Cat C9.3 |
Cat® C9.3 |
| Bore |
5.1 in |
5.4 in |
4.5 in |
4.5 in |
| Stroke |
6.2 in |
6.75 in |
45.2 in |
45.2 in |
| Displacement |
736 in³ |
926 in³ |
567.5 in³ |
567.5 in³ |
| Gross Power - SAE J1995 |
434 HP |
452 HP |
342 HP |
342 HP |
| Net Power - SAE J1349 |
424 HP |
439 HP |
334 HP |
334 HP |
| Peak Engine Torque Gross (SAE J1995) |
1614 lb/ft |
1711 ft·lbf |
1275 ft·lbf |
1275 lb/ft |
| Peak Engine Torque Speed |
1200 r/min |
1200 r/min |
1200 r/min |
1200 r/min |
| Peak Engine Torque Net (SAE J1349) |
1597 lb/ft |
1670 ft·lbf |
1263 ft·lbf |
1263 ft·lbf |
| Net Power - ISO 14396 |
447 HP |
447 HP |
338 HP |
338 HP |
| No Engine De-rating Required Below |
12500 ft |
- |
- |
3000 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
Cat® C13 |
- |
- |
- |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V |
- |
Cat C15 |
- |
- |
| Emissions |
- |
The C15 engine meets Tier 4 Final and Stage V emission standards. |
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
- |
| Note (4) |
- |
Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
- |
| Note (2) |
- |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
- |
| Note (3) |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. |
- |
| Note (1) |
- |
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
- |
| Note (5) |
- |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
- |
- |
| No Engine De-rating Below |
- |
10000 ft |
3000 ft |
- |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV |
- |
- |
Cat® C9.3 |
Cat® C9.3 |
Transmission |
| Forward - 1 |
5 mile/h |
4 mile/h |
5 mT/hr |
5 mile/h |
| Forward - 2 |
9 mile/h |
5.3 mile/h |
9.4 mT/hr |
9.4 mile/h |
| Forward - 3 |
14 mile/h |
7.3 mile/h |
14.4 mT/hr |
14.4 mile/h |
| Forward - 4 |
22 mile/h |
9.2 mile/h |
22.1 mT/hr |
22.1 mile/h |
| Forward - 5 |
30 mile/h |
12.2 mile/h |
30.7 mT/hr |
30.7 mile/h |
| Forward - 6 |
35 mile/h |
14.9 mile/h |
36.3 mT/hr |
36.3 mile/h |
| Reverse - 1 |
6 mile/h |
4.2 mile/h |
5.5 mT/hr |
5.5 mile/h |
| Reverse - 2 |
- |
9.8 mile/h |
- |
- |
| Forward - 8 |
- |
24.7 mile/h |
- |
- |
| Forward - 7 |
- |
20.6 mile/h |
- |
- |
| Forward - 9 |
- |
35.7 mile/h |
- |
- |
Service Refill Capacities |
| Fuel Tank |
108.8 gal (US) |
145.3 gal (US) |
91 gal (US) |
91 gal (US) |
| Cooling System |
21.9 gal (US) |
23.7 gal (US) |
18 gal (US) |
18 gal (US) |
| Hydraulic System |
29.1 gal (US) |
- |
29.1 gal (US) |
24 gal (US) |
| Engine Crankcase |
10 gal (US) |
13.7 gal (US) |
8 gal (US) |
8 gal (US) |
| Transmission |
12.3 gal (US) |
- |
10 gal (US) |
10 gal (US) |
| Final Drives/Differential |
33 gal (US) |
- |
33 gal (US) |
33 gal (US) |
| Output Transfer Gear Box |
5.5 gal (US) |
- |
5 gal (US) |
5 gal (US) |
| DEF Tank |
5.3 gal (US) |
6.5 gal (US) |
4 gal (US) |
4 gal (US) |
| Axles - Each |
- |
15.8 gal (US) |
- |
- |
| Brake Cooling Tank |
- |
17.7 gal (US) |
- |
- |
| Transmission - OTG |
- |
19.8 gal (US) |
- |
- |
| Steering/Hoist Hydraulic System |
- |
36.9 gal (US) |
24 gal (US) |
- |
| Final Drive - Each |
- |
1.3 gal (US) |
1.6 gal (US) |
1.6 gal (US) |
Sound Levels |
| Interior Cab |
72 dB(A) |
72 dB(A) |
69 dB(A) |
- |
| Note (2) |
- |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
- |
| Note (1) |
- |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f |
- |
Standards |
| Brakes |
ISO 3450:2011 |
ISO 3450 – 2011 |
ISO 3450 – 2011 |
ISO 3450:2011 |
| Cab - FOPS |
ISO 3449:2005 Level II |
ISO 3449 Level II – 2005 |
ISO 3449 Level II – 2008 |
ISO 3449:2005 Level II |
| Cab - ROPS |
ISO 3471:2008 |
ISO 3471 – 2008 |
ISO 3471 – 2008 |
ISO 3471:2008 |
| Steering |
ISO 5010:2019 |
ISO 5010 – 2007 |
ISO 5010 – 2007 |
ISO 5010:2019 |
Steering |
| Lock to Lock |
4.75 seconds at 60 rpm |
4.75 seconds @ 60 rpm |
4.75 seconds @ 60 rpm |
4.75 seconds at 60 rpm |
Turning Circle |
| Turning Dimensions - SAE Turning Radius |
294 in |
303 in |
294 in |
294 in |
| Turning Dimensions - Inside Radius |
149 in |
156 in |
153 in |
153 in |
| Turning Dimensions - Aisle Width |
212 in |
220 in |
210 in |
210 in |
| Turning Dimensions - Clearance Radius |
318 in |
330 in |
318 in |
318 in |
| Turning Dimensions - Steer Angle - Left/Right |
45° |
45° |
45° |
45 ° |
| Note |
Dimensions are for machines equipped with 750/65 R25 tires. |
Dimensions are for machines equipped with 29.5 R25 tires. |
Dimensions are for machines equipped with 23.5R25 tires. |
Dimensions are for machines equipped with 23.5R25 tires. |
Body Capacities |
| Heaped (SAE 2:1) |
- |
29.7 yd³ |
19.6 yd³ |
- |
| Struck |
- |
22.2 yd³ |
14.4 yd³ |
- |
| Tailgate Heaped SAE 2:1 |
- |
31.9 yd³ |
20.4 yd³ |
- |
| Tailgate Struck |
- |
23.4 yd³ |
14.5 yd³ |
- |
Body Hoist |
| Raise Time |
- |
12 s |
10 s |
- |
| Lower Time |
- |
12 s |
8 s |
- |
Operating Weights |
| Center Axle - Empty |
- |
14636 lb |
10242 lb |
- |
| Rear Axle - Empty |
- |
14145 lb |
9757 lb |
- |
| Center Axle - Rated Load |
- |
37670 lb |
23699 lb |
- |
| Front Axle - Empty |
- |
42596 lb |
30974 lb |
- |
| Total - Empty |
- |
71377 lb |
50975 lb |
- |
| Center Axle - Loaded |
- |
51088 lb |
33944 lb |
- |
| Front Axle - Loaded |
- |
49723 lb |
36484 lb |
- |
| Total - Rated Load |
- |
80027 lb |
52910 lb |
- |
| Rear Axle - Rated Load |
- |
37670 lb |
23699 lb |
- |
| Rear Axle - Loaded |
- |
50594 lb |
33457 lb |
- |
| Front Axle - Rated Load |
- |
4687 lb |
5511 lb |
- |
| Total - Loaded |
- |
151405 lb |
103886 lb |
- |
Body Plate |
| Type |
- |
High strength Brinell HB450 wear resistant steel |
High strength Brinell HB450 wear resistant steel |
- |
Body Plate Thickness |
| Side Plates |
- |
0.43 in |
0.43 in |
- |
| Base Plate |
- |
0.51 in |
0.51 in |
- |
| Front Plate |
- |
0.28 in |
0.28 in |
- |
Optimal Loader/Truck Pass Matching |
| Note |
- |
An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased pr |
- |
- |
| Wheel Loader: 972M - Passes |
- |
3 |
- |
- |
| Wheel Loader: 962M - Passes |
- |
5 |
4-5 |
- |
| Wheel Loader: 966M - Passes |
- |
4–5 |
- |
- |
| Hydraulic Excavator: 374F - Passes |
- |
3–4 |
- |
- |
| Hydraulic Excavator: 352F - Passes |
- |
5–6 |
- |
- |
| Wheel Loader: 950M - Passes |
- |
- |
5 |
- |
| Wheel Loaders: 966M/966M XE - Passes |
- |
- |
4 |
- |
| Hydraulic Excavators: 336F/336F XE - Passes |
- |
- |
5-6 |
- |
| Wheel Loaders: 972M/972M XE - Passes |
- |
- |
3-4 |
- |
| Hydraulic Excavators: 349F/349F XE - Passes |
- |
- |
4-5 |
- |
