Compare Equipment Go Back
 730 Bare Chassis Articulated Truck |
 745 Articulated Truck |
|
|
Wheel Base Length |
|||
|---|---|---|---|
| Standard Wheel Base | 156.7 in | - | - |
| Long Wheel Base | 215.2 in | - | - |
Weights |
|||
| Rated Payload | 38.9 ton (US) | 45.2 t | - |
Engine |
|||
| Engine Model | Cat® C13 | Cat C18 | - |
| Gross Power - SAE J1995:2014 | 375 hp | 511 hp | - |
| Net Power - SAE J1349:2011 | 367 hp | 496 hp | - |
| Bore | 5.1 in | 5.7 in | - |
| Stroke | 6.2 in | 7.2 in | - |
| Displacement | 762.8 in³ | 1106 in³ | - |
| Net Power - ISO 14396 | 370 hp | 504 hp | - |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | - |
| Peak Engine Torque Gross (SAE J1995) | 1579 lb/ft | 1931 ft·lbf | - |
| Peak Engine Torque Net (SAE J1349) | 1554 ft·lbf | 1887 ft·lbf | - |
| No Engine De-rating Required Below | 12500 ft | 10000 ft | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C13 | - | - |
| Note (1) | - | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. | - |
| Note (2) | - | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. | - |
| Note (3) | - | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. | - |
| Note (4) | - | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio | - |
| Emissions | - | The 745 meets Tier 4 Final and Stage V emission standards. | - |
Transmission |
|||
| Forward - 1 | 5 mile/h | 3.8 mile/h | - |
| Forward - 2 | 9 mile/h | 5 mile/h | - |
| Forward - 3 | 14 mile/h | 7 mile/h | - |
| Forward - 4 | 21 mile/h | 8.8 mile/h | - |
| Forward - 5 | 29 mile/h | 11.6 mile/h | - |
| Forward - 6 | 34 mile/h | 14.2 mile/h | - |
| Reverse - 1 | 6 mile/h | 4 mile/h | - |
| Forward - 7 | - | 19.6 mile/h | - |
| Forward - 8 | - | 23.5 mile/h | - |
| Forward - 9 | - | 34 mile/h | - |
| Reverse - 2 | - | 9.1 mile/h | - |
Service Refill Capacities |
|||
| Fuel Tank | 108.8 gal (US) | 145.3 gal (US) | - |
| Cooling System | 21.9 gal (US) | 23.7 gal (US) | - |
| Hydraulic System | 29.1 gal (US) | - | - |
| Engine Crankcase | 10 gal (US) | 13.7 gal (US) | - |
| Transmission | 12.4 gal (US) | - | - |
| Final Drives/Differential | 33 gal (US) | - | - |
| Output Transfer Gear Box | 6.3 gal (US) | - | - |
| DEF Tank | 5.3 gal (US) | 5.3 gal (US) | - |
| Brake Cooling Tank | - | 17.69 gal (US) | - |
| Steering/Hoist Hydraulic System | - | 36.9 gal (US) | - |
| Transmission - OTG | - | 19.8 gal (US) | - |
| Final Drive - Each | - | 1.3 gal (US) | - |
| Axles - Each | - | 15.8 gal (US) | - |
Sound Levels |
|||
| Interior Cab | 72 dB(A) | 72 dB(A) | - |
| Note (1) | - | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the | - |
| Note (2) | - | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | - |
Standards |
|||
| Brakes | ISO 3450:2011 | ISO 3450 – 2011 | - |
| Cab - FOPS | ISO 3449:2005 Level II | ISO 3449 Level II – 2005 | - |
| Cab - ROPS | ISO 3471:2008 | ISO 3471 – 2008 | - |
| Steering | ISO 5010:2019 | ISO 5010 – 2019 | - |
Steering |
|||
| Lock to Lock | 4.75 seconds @ 60 rpm | 4.8 seconds @ 60 rpm | - |
Turning Circle |
|||
| Turning Dimensions - Inside Radius | 153 in | 174 in | - |
| Turning Dimensions - SAE Turning Radius | 294 in | 340 in | - |
| Turning Dimensions - Aisle Width | 210 in | 233 in | - |
| Turning Dimensions - Clearance Radius | 318 in | 356 in | - |
| Turning Dimensions - Steer Angle - Left/Right | 45 ° | 45 deg | - |
| Note | Dimensions are for machines equipped with 23.5 R25 tires. | Dimensions are for machines equipped with 29.5R25 tires. | - |
Body Capacities |
|||
| Heaped (SAE 2:1) | - | 33.4 yd³ | - |
| Struck | - | 26 yd³ | - |
| Tailgate Heaped SAE 2:1 | - | 35.7 yd³ | - |
| Tailgate Struck | - | 25.5 yd³ | - |
Operating Weights |
|||
| Front Axle - Empty | - | 42285 lb | - |
| Center Axle - Empty | - | 15653 lb | - |
| Rear Axle - Empty | - | 15653 lb | - |
| Total - Empty | - | 72995 lb | - |
| Front Axle - Rated Load | - | 12963 lb | - |
| Center Axle - Rated Load | - | 38713 lb | - |
| Rear Axle - Rated Load | - | 38713 lb | - |
| Total - Rated Load | - | 90389 lb | - |
| Front Axle - Loaded | - | 55248 lb | - |
| Center Axle - Loaded | - | 54366 lb | - |
| Rear Axle - Loaded | - | 53771 lb | - |
| Total - Loaded | - | 163385 lb | - |
Body Plate |
|||
| Type | - | High Strength Brinell HB450 Wear Resistant Steel | - |
| Front | - | 0.28 in | - |
| Chute | - | 0.55 in | - |
| Side | - | 0.43 in | - |
| Base | - | 0.55 in | - |
Body Hoist |
|||
| Raise (manual) | - | 12 s | - |
| Raise (automatic) | - | 13 s | - |
| Lower (manual) | - | 10 s | - |
| Lower (automatic) | - | 10 s | - |
Optimal Loader/Truck Pass Matching |
|||
| Hydraulic Excavator: 390 - Passes | - | 4 | - |
| Hydraulic Excavator: 374 - Passes | - | 5 | - |
| Wheel Loader: 982 - Passes | - | 4 | - |
| Wheel Loader: 980 - Passes | - | 4-5 | - |
| Wheel Loader: 972 - Passes | - | 4-5 | - |
| Note | - | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. | - |
Add a Similar Product:
-
740 GC Articulated Truck Add
-
740 EJ Articulated Truck Add
-
735 Articulated Truck Add
-
730 Articulated Truck Add
-
730 EJ Articulated Truck Add
-
725 Articulated Truck Add
-
740 GC Bare Chassis Articulated Truck Add
-
745 Bare Chassis Articulated Truck Add
-
735 Bare Chassis Articulated Truck Add
-
725 Bare Chassis Articulated Truck Add