CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    730 Bare Chassis Articulated Truck
    View Product
    735 Articulated Truck
    View Product Remove
    730 EJ Articulated Truck
    View Product Remove
    725 Articulated Truck
    View Product Remove

    Wheel Base Length
    Standard Wheel Base 156.7 in - - -
    Long Wheel Base 215.2 in - - -

    Weights
    Rated Payload 38.9 ton (US) 35.3 ton (US) 30 ton (US) 26.5 ton (US)

    Engine
    Engine Model Cat® C13 Cat® C13 Cat® C13 Cat C9.3
    Gross Power - SAE J1995:2014 375 hp 434 hp 375 hp 342 hp
    Net Power - SAE J1349:2011 367 hp 424 hp 367 hp 334 hp
    Bore 5.1 in 5.1 in 5.1 in 4.5 in
    Stroke 6.2 in 6.2 in 6.2 in 45.2 in
    Displacement 762.8 in³ 736 in³ 763 in³ 567.5 in³
    Net Power - ISO 14396 370 hp 429 hp 370 hp 338 hp
    Peak Engine Torque Speed 1200 r/min 1200 r/min 1200 r/min 1200 r/min
    Peak Engine Torque Gross (SAE J1995) 1579 lb/ft 1614 ft·lbf 1579 ft·lbf 1275 ft·lbf
    Peak Engine Torque Net (SAE J1349) 1554 ft·lbf 1597 ft·lbf - 1263 ft·lbf
    No Engine De-rating Required Below 12500 ft - - -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C13 - - Cat® C9.3
    Emissions - The 735 meets Tier 4 Final and Stage V emission standards. The 730 EJ meets Tier 4 Final and Stage V emission standards. The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
    Note (3) - The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
    No Engine De-rating Below - 12500 ft 12500 ft 3000 ft
    Note (2) - The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Note (5) - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio -
    Note (4) - Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
    Note (1) - The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V - Cat C13 Cat C13 -
    Peak Engine Torque Net (ISO 14396) - - 1564 ft·lbf -

    Transmission
    Forward - 1 5 mile/h 5 mile/h 5 mile/h 5 mT/hr
    Forward - 2 9 mile/h 9 mile/h 9 mile/h 9.4 mT/hr
    Forward - 3 14 mile/h 14 mile/h 14 mile/h 14.4 mT/hr
    Forward - 4 21 mile/h 22 mile/h 21 mile/h 22.1 mT/hr
    Forward - 5 29 mile/h 30 mile/h 29 mile/h 30.7 mT/hr
    Forward - 6 34 mile/h 35 mile/h 34 mile/h 36.3 mT/hr
    Reverse - 1 6 mile/h 6 mile/h 6 mile/h 5.5 mT/hr

    Service Refill Capacities
    Fuel Tank 108.8 gal (US) 108.8 gal (US) 108.8 gal (US) 91 gal (US)
    Cooling System 21.9 gal (US) 21.9 gal (US) 21.9 gal (US) 18 gal (US)
    Hydraulic System 29.1 gal (US) 29.1 gal (US) 29.1 gal (US) 29.1 gal (US)
    Engine Crankcase 10 gal (US) 10 gal (US) 10 gal (US) 8 gal (US)
    Transmission 12.4 gal (US) 12.3 gal (US) 12.4 gal (US) 10 gal (US)
    Final Drives/Differential 33 gal (US) 33 gal (US) 33 gal (US) 33 gal (US)
    Output Transfer Gear Box 6.3 gal (US) 5.5 gal (US) 6.3 gal (US) 5 gal (US)
    DEF Tank 5.3 gal (US) 5.3 gal (US) 5.3 gal (US) 4 gal (US)
    Steering/Hoist Hydraulic System - - - 24 gal (US)
    Final Drive - Each - - - 1.6 gal (US)

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) 72 dB(A) 69 dB(A)
    Note (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Note (1) - The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f

    Standards
    Brakes ISO 3450:2011 ISO 3450 – 2011 ISO 3450 – 2011 ISO 3450 – 2011
    Cab - FOPS ISO 3449:2005 Level II ISO 3449 Level II – 2005 ISO 3449 Level II – 2005 ISO 3449 Level II – 2008
    Cab - ROPS ISO 3471:2008 ISO 3471 – 2008 ISO 3471 – 2008 ISO 3471 – 2008
    Steering ISO 5010:2019 ISO 5010 – 2007 ISO 5010 – 2007 ISO 5010 – 2007

    Steering
    Lock to Lock 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

    Turning Circle
    Turning Dimensions - Inside Radius 153 in 149 in 152 in 153 in
    Turning Dimensions - SAE Turning Radius 294 in 294 in 294 in 294 in
    Turning Dimensions - Aisle Width 210 in 212 in 214 in 210 in
    Turning Dimensions - Clearance Radius 318 in 318 in 318 in 318 in
    Turning Dimensions - Steer Angle - Left/Right 45 ° 45° 45° 45°
    Note Dimensions are for machines equipped with 23.5 R25 tires. Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

    Body Capacities
    Heaped (SAE 2:1) - 26.2 yd³ 22.1 yd³ 19.6 yd³
    Struck - 20.3 yd³ 17.7 yd³ 14.4 yd³
    Tailgate Heaped SAE 2:1 - 27.9 yd³ - 20.4 yd³
    Tailgate Struck - 21.3 yd³ - 14.5 yd³

    Body Hoist
    Raise Time - 12 s - 10 s
    Lower Time - 11 s - 8 s

    Operating Weights
    Total - Loaded - 126192 lb 117528 lb 103886 lb
    Front Axle - Empty - 34128 lb 34723 lb 30974 lb
    Total - Rated Load - 70548 lb 59745 lb 52910 lb
    Rear Axle - Loaded - 41270 lb 41017 lb 33457 lb
    Rear Axle - Empty - 10516 lb 11707 lb 9757 lb
    Center Axle - Empty - 11001 lb 12214 lb 10242 lb
    Center Axle - Rated Load - 30754 lb 29156 lb 23699 lb
    Front Axle - Loaded - 43166 lb 35009 lb 36484 lb
    Total - Empty - 55645 lb 58643 lb 50975 lb
    Front Axle - Rated Load - 9039 lb 1433 lb 5511 lb
    Rear Axle - Rated Load - 30754 lb 29156 lb 23699 lb
    Center Axle - Loaded - 41756 lb 41502 lb 33944 lb

    Body Plate
    Type - High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavators: 336F/336F XE - Passes - 5–6 5–6 5-6
    Note - An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas -
    Hydraulic Excavators: 349F/349F XE - Passes - 4–5 4–5 4-5
    Wheel Loaders: 972M/972M XE - Passes - 3–4 3–4 3-4
    Wheel Loader: 962M - Passes - 4–5 4–5 4-5
    Wheel Loader: 950M - Passes - 5 5 5
    Wheel Loaders: 966M/966M XE - Passes - 4 4 4

    Body Plate Thickness
    Base Plate - 0.51 in - 0.51 in
    Front Plate - 0.28 in - 0.28 in
    Side Plates - 0.43 in - 0.43 in

    Eject/Retract Times
    Retract Time - - 15 s -
    Eject Time - - 12 s -
    Add a Similar Product:
    • 740 GC Articulated Truck Add
    • 745 Articulated Truck Add
    • 740 EJ Articulated Truck Add
    • 730 Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add