Advertised power is tested per the specified standard in effect at the time of manufacture.
-
Note (3)
-
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, aftertreatment, and fan at minimum speed.
-
Note (4)
-
Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.
-
Note (5)
-
The C15 engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
Note (6)
-
Diesel exhaust fluid (DEF) used in Cat selective catalytic reduction (SCR) systems must meet the requirements outlined in ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
-
No Engine De-rating Below
-
10000 ft
-
Transmission
Forward - 1
5 mile/h
4 mile/h
-
Forward - 2
9 mile/h
5.3 mile/h
-
Forward - 3
14 mile/h
7.3 mile/h
-
Forward - 4
21 mile/h
9.2 mile/h
-
Forward - 5
29 mile/h
12.2 mile/h
-
Forward - 6
34 mile/h
14.9 mile/h
-
Reverse - 1
6 mile/h
4.2 mile/h
-
Forward - 7
-
20.6 mile/h
-
Forward - 8
-
24.7 mile/h
-
Forward - 9
-
35.7 mile/h
-
Reverse - 2
-
9.8 mile/h
-
Service Refill Capacities
Fuel Tank
108.8 gal (US)
145.3 gal (US)
-
Cooling System
21.9 gal (US)
23.7 gal (US)
-
Hydraulic System
29.1 gal (US)
-
-
Engine Crankcase
10 gal (US)
13.7 gal (US)
-
Transmission
12.4 gal (US)
-
-
Final Drives/Differential
33 gal (US)
-
-
Output Transfer Gear Box
6.3 gal (US)
-
-
DEF Tank
5.3 gal (US)
6.5 gal (US)
-
Brake Cooling Tank
-
17.7 gal (US)
-
Steering/Hoist Hydraulic System
-
36.9 gal (US)
-
Transmission - OTG
-
19.8 gal (US)
-
Final Drive - Each
-
1.3 gal (US)
-
Axles - Each
-
15.8 gal (US)
-
Sound Levels
Interior Cab
72 dB(A)
72 dB(A)
-
Note (1)
-
The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan
-
Note (2)
-
Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.
-
Standards
Brakes
ISO 3450:2011
ISO 3450 – 2011
-
Cab - FOPS
ISO 3449:2005 Level II
ISO 3449 Level II – 2005
-
Cab - ROPS
ISO 3471:2008
ISO 3471 – 2008
-
Steering
ISO 5010:2019
ISO 5010 – 2019
-
Steering
Lock to Lock
4.75 seconds @ 60 rpm
4.75 seconds @ 60 rpm
-
Turning Circle
Turning Dimensions - Inside Radius
153 in
156 in
-
Turning Dimensions - SAE Turning Radius
294 in
303 in
-
Turning Dimensions - Aisle Width
210 in
220 in
-
Turning Dimensions - Clearance Radius
318 in
330 in
-
Turning Dimensions - Steer Angle - Left/Right
45 °
45°
-
Note
Dimensions are for machines equipped with 23.5 R25 tires.
Dimensions are for machines equipped with 29.5 R25 tires.
-
Body Capacities
Heaped (SAE 2:1)
-
29.7 yd³
-
Struck
-
23.2 yd³
-
Tailgate Heaped SAE 2:1
-
32 yd³
-
Tailgate Struck
-
24.4 yd³
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system co
-
Operating Weights
Front Axle - Empty
-
43200 lb
-
Center Axle - Empty
-
14804 lb
-
Rear Axle - Empty
-
14562 lb
-
Total - Empty
-
72565 lb
-
Front Axle - Rated Load
-
7002 lb
-
Center Axle - Rated Load
-
36513 lb
-
Rear Axle - Rated Load
-
36513 lb
-
Total - Rated Load
-
80027 lb
-
Front Axle - Loaded
-
50201 lb
-
Center Axle - Loaded
-
51317 lb
-
Rear Axle - Loaded
-
51074 lb
-
Total - Loaded
-
152593 lb
-
Body Plate
Type
-
High strength Brinell HB450 wear resistant steel
-
Body Plate Thickness
Front Plate
-
0.28 in
-
Base Plate
-
0.51 in
-
Side Plates
-
0.43 in
-
Body Hoist
Raise Time
-
12 s
-
Lower Time
-
12 s
-
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 374 - Passes
-
3-4
-
Hydraulic Excavator: 352 - Passes
-
5-6
-
Wheel Loader: 972 - Passes
-
3
-
Wheel Loader: 966 - Passes
-
4-5
-
Wheel Loader: 962 - Passes
-
5
-
Note
-
An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374 and 352 Hydraulic Excavators; and Cat 972, 966, and 962 Wheel Loaders. Having matched loading and hauling tools results in increased product
